Manwal tal-Utent tal-Iskaner 3D Revopoint Mini 2

1. Introduzzjoni

The Revopoint Mini 2 is a high-precision 3D scanner designed for capturing intricate details of small to medium-sized objects. Utilizing industrial-grade blue light technology, it offers exceptional accuracy and speed, making it suitable for applications such as 3D printing, dental modeling, and industrial design.

This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Revopoint Mini 2 3D Scanner to ensure optimal performance and longevity.

Figure 1: Revopoint Mini 2 3D Scanner, showcasing its design and screen interface.

2. Informazzjoni dwar is-Sigurtà

Please read all safety instructions carefully before using the Revopoint Mini 2 3D Scanner. Failure to follow these instructions may result in injury or damage to the device.

• Blue Light Safety: The Mini 2 uses Class 1 industrial blue light, which is considered 100% skin-safe. However, direct exposure to the eyes may cause minor discomfort. Avoid staring directly into the blue light emitters during operation.
• Provvista tal-Enerġija: Use only the provided power adapter. Ensure the power source matches the voltagIr-rekwiżiti speċifikati għall-apparat.
• Ambjent: Operate the scanner in a clean, dry environment. Avoid exposure to extreme temperatures, humidity, dust, or direct sunlight.
• Immaniġġjar: Handle the scanner with care. Do not drop or subject it to strong impacts.
• Tindif: Skonnettja l-provvista tal-enerġija qabel it-tindif. Uża drapp artab u niexef. Tużax prodotti tat-tindif likwidi jew aerosols.
• Modifiki: Do not attempt to disassemble, repair, or modify the scanner. Unauthorized modifications will void the warranty and may cause harm.

3. X'hemm fil-Kaxxa

Malli tiftaħ il-pakkett, ivverifika li l-komponenti kollha li ġejjin huma preżenti:

• Revopoint Mini 2 3D Scanner

Note: Additional accessories such as tripods, turntables, calibration boards, and USB cables may be included depending on the specific package purchased, as depicted in Figure 2.

Figure 2: Typical contents of the Revopoint Mini 2 package, including the scanner and various accessories.

4. Gwida ta' Setup

Follow these steps to set up your Revopoint Mini 2 3D Scanner:

1. Iftaħ l-iskaner mill-pakkett: Oħroġ l-iskaner u l-aċċessorji kollha mill-imballaġġ bir-reqqa.
2. Konnessjoni tal-Enerġija: Connect the provided power adapter to the scanner and a suitable power outlet.
3. Installazzjoni tas-Softwer: Download and install the latest version of the RevoScan software from the official Revopoint website onto your computer or mobile device. The software is essential for operating the scanner and processing scan data.
4. Qabbad mal-Apparat: Connect the Mini 2 scanner to your computer or mobile device using the provided USB Type-C cable. Ensure a stable connection.
5. Kalibrazzjoni Inizjali: For optimal accuracy, perform an initial calibration using the provided calibration board as instructed by the RevoScan software. This step ensures precise measurements.

Figure 3: The Revopoint Mini 2 scanner, ready for connection and software setup.

5. Istruzzjonijiet Operattivi

The Revopoint Mini 2 is designed for efficient and precise 3D scanning. Here are key aspects of its operation:

5.1 Scanning Principles

• Preċiżjoni: The scanner achieves a single-frame precision of up to 0.02 mm, ideal for capturing fine details.
• Veloċità: It offers fast capture speeds of up to 16 frames per second (fps), allowing for quick data acquisition.
• Teknoloġija tad-Dawl Blu: Industrial-grade blue light technology minimizes interference from ambient light, enhancing accuracy and model quality.
• Firxa ta' Qbid Uniku: A larger single capture range of up to 168 x 132 mm improves tracking and scanning of larger objects.
• Color and Texture: An RGB camera with a bigger aperture and Flash LEDs enhances the capture of intricate texture and color details. The 6 Flash LEDs also improve marker recognition for smoother scanning of featureless objects.
• IMU Technology: The integrated IMU (Inertial Measurement Unit) helps remove faulty frames caused by fast movement or shaky hands, improving tracking stability.

5.2 Proċess ta' Skennjar

1. Ipprepara l-Oġġett: For best results, especially with reflective, transparent, or very dark objects, consider using scanning spray or applying scanning markers.
2. Launch RevoScan: Open the RevoScan software on your connected device.
3. Agħżel il-Modalità tal-Iskennjar: Choose the appropriate scanning mode (e.g., handheld, turntable) and adjust settings like exposure using the software interface or the three tactile buttons on the scanner.
4. Ibda Skennjar: Begin scanning the object, maintaining a steady distance and movement as guided by the software. The IMU will assist in stable tracking.
5. Review and Process: Wara l-iskennjar, erġa'view the captured data within RevoScan. The software allows for merging multiple scans, cleaning up data, and exporting the 3D model in various formats.

Figure 4: Scanning a small, intricate object with the Revopoint Mini 2.

Figure 5: The Mini 2's capability to scan larger objects, demonstrating its versatility.

Figure 6: The scanner being used to capture a human form, highlighting its broad application.

Figure 7: Close-up of the Revopoint Mini 2's screen, showing the user interface during a scan.

6. Manutenzjoni

Proper maintenance ensures the longevity and performance of your Revopoint Mini 2 3D Scanner:

• Tindif tal-Lentijiet: Gently wipe the scanner's lenses and sensors with a soft, lint-free cloth. Avoid abrasive materials or harsh chemicals that could scratch the surfaces.
• Aġġornamenti tas-Software: Regularly check for and install software updates for RevoScan. Updates often include performance improvements, bug fixes, and new features.
• Ħażna: When not in use, store the scanner in its protective case in a cool, dry place, away from direct sunlight and extreme temperatures.
• Kura tal-Cable: Avoid bending or crimping the USB cable excessively, as this can damage the internal wires.

7 Issolvi l-problemi

This section addresses common issues you might encounter with your Revopoint Mini 2 3D Scanner.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

Revopoint products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Revopoint websit.

For technical support, troubleshooting assistance, or inquiries regarding your Revopoint Mini 2 3D Scanner, please contact Revopoint Customer Service. You can find contact information on the official Revopoint webis-sit jew permezz tal-paġna tal-ħanut tal-Amazon tagħhom:

Visit the Official Revopoint Store on Amazon