1. Informazzjoni dwar is-Sigurtà
Please read and understand all safety warnings and instructions before operating this tool. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
- Protezzjoni tal-għajnejn: Always wear appropriate eye protection (safety glasses or goggles) when operating the rotary tool.
- Biċċa tax-Xogħol Sikura: Dejjem waħħal il-biċċa tax-xogħol sew biex tevita li tiċċaqlaq waqt it-tħaddim.
- Correct Accessories: Use only accessories designed for this tool and suitable for the specific task. Ensure accessories are properly installed and tightened.
- Żomm Idejn Ċar: Keep hands and fingers away from rotating accessories.
- Skonnettja l-Enerġija: Disconnect the tool from its power source (or ensure it is off) before changing accessories, making adjustments, or performing maintenance.
- Kundizzjonijiet Ambjentali: Tħaddimx l-għodda f'post damp or wet conditions. Keep the work area well-lit and clear of clutter.
- Sigurtà tal-Persuni li Jinsabu fil-Miexi: Żomm lit-tfal u lil dawk li jkunu fil-qrib 'il bogħod miż-żona tal-operat.
- Evita tagħbija żejda: Do not force the tool. Allow the tool to work at its intended speed.
- Sigurtà tal-batterija: Do not disassemble, crush, or expose the battery to high temperatures. Dispose of batteries properly.
2. Prodott Aktarview
The HARDELL 4V Cordless Rotary Tool is a versatile handheld power tool designed for various tasks such as cutting, sanding, polishing, drilling, and carving. It features a powerful motor, variable speed settings, a digital display, and a long-lasting 4000mAh battery with Type-C fast charging.
2.1 Kontenut tal-Pakkett
Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett tiegħek:
- 1x HARDELL 4V Cordless Rotary Tool
- 20x Sandpaper
- 5x Big Sand Ring
- 1x Big Sand Drum
- 10x Small Sand Ring
- 1x Small Sand Drum
- 15x Standard Cutting Disc
- 5x Mesh Cutting Disc
- 1x Diamond Cutting Disc
- 1x Cutting Disc Connecting Handle
- 5x Big Wool Wheel
- 1x Wool Wheel Connecting Handle
- 2x Silicon Carbide Grinding Wheel
- 3x Aluminum Oxide Grinding Wheel
- 1x Wire Brush (flat)
- 2x 1/8 inch Chuck
- 1x 1/8 inch Drill Bit
- 1x Milling Cutter
- 3x Diamond Grinding Head
- 1x Wrench
- 1x Data Cable (Type-C)
- 1x Manwal ta 'Istruzzjoni
3. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Brand | HARDELL |
| Numru tal-Mudell | DM22410ORAHD-1 |
| Voltage | 4 Volts |
| Sors tal-Enerġija | Li jaħdem bil-batterija (jone tal-litju) |
| Kapaċità tal-batterija | 4000mAh |
| Tip ta 'ċċarġjar | Iċċarġjar Mgħaġġel tat-Tip C |
| Ħin tal-Iċċarġjar | 2-4 sigħat |
| Ħin ta' Ħidma Kontinwu | 60-120 minuta |
| Veloċitajiet Varjabbli | 6 settings (8000-28000 RPM) |
| Daqs Chuck | 1/8 pulzier |
| Piż tal-oġġett | 0.88 pounds (tool only) / 1.26 pounds (package) |
| Dimensjonijiet tal-Prodott | 7.6 x 1.5 x 1.4 pulzieri |
| Karatteristiċi Speċjali | Cordless, Ergonomic Grip, Lightweight, Digital Gear & Power Display, Safety Lock |
4. Setup
4.1 Iċċarġjar tal-Għodda
Before first use, fully charge the rotary tool. The digital power display will indicate the charging status.
- Connect the provided Type-C data cable to the charging port on the tool.
- Connect the other end of the cable to a compatible USB power source (e.g., wall adapter, computer, power bank).
- The digital display will show charging progress. A full charge typically takes 2-4 hours.
- Skonnettja l-kejbil ladarba jkun iċċarġjat kompletament.
4.2 Aċċessorji twaħħil
Always ensure the tool is powered off before changing accessories.
4.2.1 General Accessory Installation
- Press down the spindle locking button to secure the shaft and unscrew the nut at the chuck.
- Choose the appropriate collet for your accessory's shank size and insert it into the chuck. Then, place the black nut over the collet.
- Insert the desired accessory bit into the collet. Hold the lock button and screw on the nut tightly using the provided wrench.
- Importanti: Tagħfasx il-buttuna tal-qfil tal-magħżel waqt li l-mutur ikun qed jaħdem.
4.2.2 Sanding Band Installation
- Insert the sanding drum into the collet and tighten the nut.
- Ħoll il-vit fuq it-tanbur tar-ramel.
- Installa l-faxxa tax-xkatlar fuq it-tanbur.
- Press down the spindle lock button and tighten the screw of the sanding drum with the wrench.
4.2.3 HSS Cutting Disc / Sanding Paper Installation
- Daħħal il-mandrin tar-rota fil-kolletta u ssikka l-iskorfina.
- Dismantle the screw of the wheel mandrel.
- Installa l-mandrin tar-rota u arma d-diska tat-tqattigħ HSS jew il-karta tax-xkatlar.
- Press down the spindle lock button and tighten the screw of the wheel mandrel with the wrench.
5. Istruzzjonijiet Operattivi
5.1 Tixgħel/Jitfi
- To turn on the tool, press the power button. The digital display will illuminate.
- To turn off the tool, press the power button again.
5.2 Aġġustament tal-Veloċità
The tool features 6 variable speed settings, ranging from 8000 RPM to 28000 RPM. The digital display shows the current speed setting.
- Use the '+' and '-' buttons to increase or decrease the rotational speed.
- Select a lower speed for polishing and cleaning, and higher speeds for grinding, sharpening, cutting, and drilling.
5.3 Wiri Diġitali
The digital display provides real-time information about the tool's status:
- L-issettjar tal-veloċità: Displays the current gear/speed level (1-6).
- Livell tal-batterija: Shows the remaining battery charge (100%, 75%, 50%, 25%). This helps prevent unexpected power outages waqt l-użu.
5.4 Applikazzjonijiet
The HARDELL rotary tool is suitable for a wide range of applications:
- Qtugħ: Use appropriate cutting discs for materials like metal, plastic, or wood.
- Xkatlar: Utilize sanding bands or paper for smoothing surfaces and removing material.
- Illustrar: Attach wool wheels or felt wheels with polishing compound for a smooth, shiny finish.
- Tħaffir: Use drill bits for creating small holes in various materials.
- Inċiżjoni/Tinqix: Employ diamond grinding heads or milling cutters for detailed work on wood, metal, or stone.
6. Manutenzjoni
Manutenzjoni regolari tiżgura prestazzjoni ottimali u testendi l-ħajja tal-għodda tiegħek.
- Tindif: After each use, wipe the tool body with a clean, dry cloth. Use a soft brush or compressed air to clear dust and debris from ventilation openings. Do not use harsh chemicals or abrasive cleaners.
- Kura tal-Aċċessorji: Naddaf l-aċċessorji wara l-użu. Aħżenhom fil-kaxxa pprovduta biex tevita l-ħsara u t-telf. Ibdel l-aċċessorji milbusa jew bil-ħsara minnufih.
- Ħażna tal-batterija: For long-term storage, charge the battery to approximately 50% and store the tool in a cool, dry place away from direct sunlight. Recharge every 3-6 months if not in use to maintain battery health.
- Spezzjoni Ġenerali: Periodically check for loose screws, damaged cords (if applicable), or any other signs of wear or damage. Do not operate a damaged tool.
7 Issolvi l-problemi
Irreferi għat-tabella t'hawn taħt għal kwistjonijiet komuni u s-soluzzjonijiet tagħhom.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Għodda ma tixgħel | Il-batterija hija eżawrita | Iċċarġja l-għodda kompletament billi tuża l-kejbil tat-Tip Ċ. |
| L-għodda tieqaf waqt l-operazzjoni | Overload protection activated / Low battery | Naqqas il-pressjoni fuq l-għodda jew erġa' ċċarġja l-batterija. |
| L-aċċessorju jitbandal jew jaqa' | Chuck nut not tightened / Incorrect collet size | Ensure the chuck nut is securely tightened with the wrench. Verify the correct collet size is used for the accessory shank. |
| Poor performance / Slow cutting/sanding | Worn accessory / Incorrect speed setting / Excessive pressure | Replace the accessory if worn. Increase the speed setting. Apply less pressure, allowing the tool to do the work. |
| Tool gets hot quickly | Continuous heavy use / Blocked ventilation | Allow the tool to cool down. Ensure ventilation ports are clear of debris. Avoid prolonged heavy-duty tasks. |
8. Garanzija u Appoġġ
HARDELL provides a one-year warranty for this product from the date of purchase. Additionally, a 30-day free return policy is offered to ensure customer satisfaction.
For technical support, warranty claims, or any questions regarding your HARDELL 4V Cordless Rotary Tool Kit, please contact our customer service team through the retailer's platform or visit the official HARDELL websit għal informazzjoni ta' kuntatt.
