ROCAM Alarm Clock Radio with Bluetooth Speaker and USB Charging, Model 1025pro User Manual

1. Prodott Aktarview

The ROCAM 1025pro is a versatile alarm clock radio designed for modern living spaces. It integrates an FM radio, Bluetooth speaker, and night light, along with convenient charging ports and essential alarm functions.

Stampa 1.1: Quddiem view of the ROCAM 1025pro Alarm Clock Radio, displaying the time and various icons.

Karatteristiċi ewlenin:

• Disinn kompatt: Stylish and modern fabric design suitable for any room.
• Wirja Diġitali ċara: Large, easy-to-read numbers with adjustable brightness (5 levels).
• Radju FM: Auto-scan and save up to 20 preset stations (87.5MHz to 108.0MHz).
• Speaker Bluetooth: Seamless pairing for audio streaming with 16 volume settings.
• Modi ta' Allarm Doppju: Wake up to a classic beep or your favorite radio station.
• Dawl bil-lejl: Integrated warm night light function.
• Portijiet tal-Iċċarġjar: USB and Type-C ports for device charging.
• Backup tal-batterija: Maintains time and settings during power outages (requires plug-in for full function).
• Kontrolli faċli għall-utent: Intuitive buttons and rotary knobs for easy operation, including DST mode.

Image 1.2: The ROCAM 1025pro highlighting its 3-in-1 functionality: Alarm Clock, FM Radio, and Bluetooth Speaker, shown on a bedside table.

2. Kontenut tal-Pakkett

Jekk jogħġbok iċċekkja l-pakkett għall-oġġetti li ġejjin:

• ROCAM 1025pro Alarm Clock Radio
• Adapter tal-Enerġija DC 5V/2A
• 60" USB-DC Power Cable (Type-C interface)
• CR2032 Button Battery (pre-installed for backup)
• Manwal għall-Utent (dan id-dokument)

Stampa 2.1: Wara view of the ROCAM 1025pro showing the DC 5V/2A power input, USB-A, and Type-C ports, alongside the power adapter and CR2032 button battery.

3. Setup

3.1 Konnessjoni tal-Enerġija

1. Connect the provided USB-DC power cable to the DC 5V IN port on the back of the alarm clock.
2. Ipplaggja l-adapter tal-enerġija fi żbokk tal-ħajt standard.
3. Id-displej se jixgħel, u jindika li l-apparat huwa mixgħul.

Nota: The CR2032 button battery is pre-installed and provides backup power for time and settings during power outages. The clock requires continuous plug-in power for full functionality.

3.2 Issettjar tal-Ħin Inizjali

Upon first power-on or after a prolonged power disconnection without battery backup, you may need to set the time.

1. Press and hold the "Time/12-24" button (usually located on the top panel) until the hour digits flash.
2. Rotate the "Time/Volume" knob (typically on the right side) to adjust the hour.
3. Press the "Time/12-24" button again to switch to minute adjustment.
4. Rotate the "Time/Volume" knob to adjust the minutes.
5. Press the "Time/12-24" button once more to confirm the time.
6. To switch between 12-hour and 24-hour format, briefly press the "Time/12-24" button when the time is displayed.

4. Istruzzjonijiet Operattivi

4.1 L-issettjar tal-allarm

The device supports two independent alarms.

1. Press the "Alarm" button (usually on the top panel) to select Alarm 1 or Alarm 2. The corresponding alarm icon will flash.
2. Press and hold the "Alarm" button until the hour digits flash.
3. Rotate the "Time/Volume" knob to adjust the alarm hour.
4. Press the "Alarm" button again to switch to minute adjustment.
5. Rotate the "Time/Volume" knob to adjust the alarm minutes.
6. Press the "Alarm" button again to select the alarm source (Buzzer or FM Radio).
7. Rotate the "Time/Volume" knob to choose. If FM Radio is selected, the last tuned station will be used.
8. Press the "Alarm" button once more to confirm and activate the alarm. The alarm icon will remain lit.
9. To deactivate an alarm, press the "Alarm" button until the alarm icon disappears.

Image 4.1: The ROCAM 1025pro displaying an alarm icon, indicating an active alarm setting.

4.2 Funzjoni Snooze

When the alarm sounds, press the "SNOOZE/LIGHT" button to activate the snooze function. The alarm will pause for approximately 9 minutes and then sound again.

4.3 Dimmer tal-Wiri

To adjust the display brightness, repeatedly press the "SNOOZE/LIGHT" button when the alarm is not sounding. There are 5 levels of brightness, from very bright to off.

4.4 Tħaddim tar-Radju FM

1. Press the "Power/Mode" button to switch to FM Radio mode. The frequency will be displayed.
2. Skanjar Awtomatiku: Press and hold the "Scan" knob (usually on the right side) to automatically scan and save available FM stations. Up to 20 stations can be stored.
3. Irfinar Manwali: Briefly rotate the "Scan" knob to manually tune the frequency.
4. Stazzjonijiet issettjati minn qabel: Press the "Preset/Pair" button to cycle through saved preset stations.
5. Aġġustament tal-Volum: Rotate the "Time/Volume" knob to adjust the radio volume (16 levels).

Image 4.2: The ROCAM 1025pro displaying an FM radio frequency, indicating FM radio mode is active.

4.5 Tqabbil tal-Ispeaker Bluetooth

1. Press the "Power/Mode" button to switch to Bluetooth mode. The Bluetooth icon will flash, indicating it's ready for pairing.
2. On your mobile device, enable Bluetooth and search for "ROCAM 1025pro" (or similar name).
3. Select the device to pair. Once connected, the Bluetooth icon on the clock display will stop flashing and remain solid.
4. You can now stream audio from your device to the alarm clock.
5. Aġġustament tal-Volum: Rotate the "Time/Volume" knob to adjust the Bluetooth audio volume (16 levels).

Immaġni 4.3: Sploda view of the ROCAM 1025pro, showing the internal speaker components and highlighting its Bluetooth capabilities.

4.6 Funzjoni tad-Dawl bil-Lejl

The device features a warm night light. To activate or deactivate it, locate the dedicated night light button (if available, otherwise it might be integrated with the SNOOZE/LIGHT button or a separate touch area). The image suggests a touch-sensitive bar below the display.

Image 4.4: The ROCAM 1025pro with its warm night light illuminated, providing ambient lighting in a dark room.

4.7 USB and Type-C Charging Ports

The alarm clock is equipped with a standard USB-A port and a Type-C port on the back for charging external devices.

• Connect your device's charging cable to the appropriate USB-A or Type-C port.
• Ensure the alarm clock is powered on and connected to a wall outlet for charging functionality.

4.8 Ħin tas-Sajf (DST)

To enable or disable Daylight Saving Time, briefly press the "DST" button (if available, or a combination of buttons as per specific model design). This will adjust the time by one hour forward or backward.

5. Manutenzjoni

5.1 Tindif

• Skonnettja l-adapter tal-enerġija qabel it-tindif.
• Uża drapp ratba u niexfa biex timsaħ in-naħa ta 'barra tal-apparat.
• Do not use liquid cleaners, aerosols, or abrasive materials, as these may damage the surface.

5.2 Sostituzzjoni tal-Batterija (CR2032)

The CR2032 button battery provides backup for time and settings. If the time and settings are lost during a brief power outage, the battery may need replacement.

1. Locate the battery compartment on the back or bottom of the unit. It is typically a drawer-type compartment.
2. Open the compartment using a small screwdriver or by sliding the tray out.
3. Neħħi l-batterija CR2032 l-antika.
4. Daħħal batterija CR2032 ġdida bin-naħa pożittiva (+) tħares 'il fuq.
5. Agħlaq il-kompartiment tal-batterija sew.
6. Dispose of the old battery responsibly according to local regulations.

6 Issolvi l-problemi

7. Speċifikazzjonijiet

8. Garanzija u Appoġġ

ROCAM products are designed for reliability and performance. For warranty information, technical support, or customer service inquiries, please refer to the contact information provided on the product packaging or the official ROCAM websit.

Jekk jogħġbok żomm il-prova tax-xiri tiegħek għal pretensjonijiet ta' garanzija.