1. Introduzzjoni
This manual provides detailed instructions for the safe and effective operation, maintenance, and troubleshooting of your Nitecore MH40S rechargeable flashlight and NB10000 power bank. Please read this manual thoroughly before use to ensure optimal performance and longevity of your devices.
2. Kontenut tal-Pakkett
Iċċekkja li l-oġġetti kollha elenkati hawn taħt huma preżenti fil-pakkett tiegħek:
- Nitecore MH40S Flashlight
- 2 x Nitecore NL2150 5,000mAh Li-ion Batteries
- Nitecore NB10000 10,000mAh Power Bank
- Swiċċ mill-bogħod bla fili
- QC Adapter
- Cable tal-Iċċarġjar tal-USB-C
- O-ring żejda
- Lanyard
- Qafliet Hook-and-loop
- 2 x Hook-and-loop Straps
- Holster
3. Karatteristiċi tal-prodott
- Utilizes a Luminengin G9 LED with a maximum output of 1,500 lumens.
- Maximum peak beam intensity of 570,000cd and a maximum throw of 1,500 meters.
- Optical system combines crystal coating and "Precis Digital Optics Technology" (PDOT).
- Powered by 2x high-capacity Li-ion batteries, providing a runtime of up to 105 hours.
- Equipped with a low power vibration indicator.
- Tactical tail switch and mode button control 4 brightness levels and 3 special modes.
- STROBE mode uses randomly changing frequencies for enhanced disorienting effects.
- Power indicator beneath the mode button displays remaining battery power.
- Intelligent Li-ion battery charging circuit with a USB-C charging port.
- Includes Nitecore NL2150 5,000mAh Li-ion batteries.
- Highly efficient constant current circuit ensures stable output.
- Incorporates Advanced Temperature Regulation (ATR) module.
- Optical lenses feature double-sided scratch-resistant coating.
- Mibnija minn liga tal-aluminju ta 'grad aero b'finitura anodizzata iebes ta' grad militari HA III.
- Waterproof and dustproof rating in accordance with IP68 (2 meters submersible).
- Reżistenti għall-impatt għal metru.
4. Speċifikazzjonijiet
4.1 MH40S Flashlight Technical Data
| FL1 Standard | TURBO | GĦOLJA | MID | BAXXA | STROBE | XANALI | SOS |
|---|---|---|---|---|---|---|---|
| Output | 1,500 Lumens | 500 Lumens | 150 Lumens | 18 Lumens | 1,500 Lumens | 1,500 Lumens | 1,500 Lumens |
| Runtime | 3h 15min | 7h 15min | 25h | 105h | — | — | — |
| Distanza tar-raġġ | 1,500m | 860m | 450m | 150m | — | — | — |
| Intensità tar-raġġ | 570,000cd | 186,000cd | 51,000cd | 5,800cd | — | — | — |
Note: The stated data is measured in accordance with international flashlight testing standards ANSI/PLATO FL 1-2019, using 2x 21700 Li-ion batteries (5,000mAh) under laboratory conditions. Actual data may vary due to different battery types or environmental conditions.
4.2 Speċifikazzjonijiet Ġenerali
- LED: Luminengin G9 LED
- Riflettur: SMO
- Batterija: 2 x 21700 Li-ion (NL2150 5,000mAh included)
- Modi Speċjali: Location Beacon, SOS, Strobe
- Beam Color: Dawl abjad
- Tul: 256 mm (10.08 pulzieri)
- Daqs tar-ras: 65 mm (2.56 pulzieri)
- Piż: 245.8 g (8.67 oz) (mingħajr batteriji)
- Materjal: Liga ta 'l-aluminju ta' grad aero
- Temm: HA III military-grade hard-anodized
- Klassifikazzjoni li ma jgħaddix ilma minnha: IP68 (2 metri sommerġibbli)
- Reżistenza għall-Impatt: 1 metru
4.3 NB10000 Power Bank Specifications
- Kapaċità: 10,000mAh 3.85V
- Enerġija Rated: 6,400mAh 5V
- Input (USB-C): 5V - 2.4A / 9V - 2A
- Output (USB-C): 5V - 3A / 9V - 2A / 12V - 1.5A
- Dual Ports Output: 5V - 3A (MAX)
- Materjal: Carbon fiber frame and panels
- Dimensjonijiet: 4.8" x 2.32" x 0.42"
- Piż: 5.29 oz
- Karatteristiċi: Dual output channels (USB and USB-C), LED remaining power level indicator, one-touch low current mode.
5. Setup
5.1 Installazzjoni tal-batterija
- Unscrew the tail cap of the MH40S flashlight.
- Insert the two Nitecore NL2150 21700 Li-ion batteries with the positive (+) terminals facing the head of the flashlight.
- Invita l-għatu tad-denb lura sewwa biex tiżgura kuntatt xieraq u reżistenza għall-ilma.
Twissija: Ensure batteries are inserted with correct polarity. Incorrect insertion can damage the device.
5.2 Iċċarġjar inizjali
Before first use, fully charge the MH40S flashlight and the NB10000 power bank.
5.2.1 Charging the MH40S Flashlight
- Sib il-port tal-iċċarġjar USB-C fuq il-qafas tat-torċa.
- Open the rubber cover protecting the port.
- Connect the USB-C charging cable to the flashlight and the QC Adapter.
- Plug the QC Adapter into a power outlet.
- The power indicator beneath the mode button will flash during charging and remain solid when fully charged.
- Close the rubber cover after charging to maintain water and dust resistance.
5.2.2 Charging the NB10000 Power Bank
- Connect the USB-C charging cable to the USB-C input port on the NB10000.
- Connect the other end of the cable to a USB power source (e.g., QC Adapter, computer USB port).
- The LED indicators on the power bank will show the charging status.
6. Istruzzjonijiet Operattivi
6.1 Basic Flashlight Operation
The MH40S features a tactical tail switch and a mode button for control.
6.1.1 Tixgħel/Jitfi
- Momentarju Fuq: Half-press and hold the tactical tail switch. Release to turn off.
- Mixgħul/Mitfi Kostanti: Fully press the tactical tail switch until a click is heard to turn on. Fully press again to turn off.
6.1.2 Brightness Level Adjustment
- With the flashlight on, press the mode button to cycle through brightness levels: LOW - MID - HIGH - TURBO.
- The flashlight will memorize the last used brightness level (except for special modes) when turned off and on again.
6.1.3 Special Modes (STROBE, BEACON, SOS)
- With the flashlight on, press and hold the mode button to activate STROBE mode.
- While in STROBE mode, press the mode button again to cycle through BEACON and SOS modes.
- To exit special modes, short press the mode button or turn off the flashlight.
6.2 Wireless Remote Switch Operation
The included wireless remote switch allows for convenient control of the MH40S from a distance of up to 1 meter (3.28 feet).
- Momentarju Fuq: Press and hold the designated button on the remote switch. Release to turn off.
- Mixgħul/Mitfi Kostanti: Press the designated button on the remote switch to turn on. Press again to turn off.
- STROBE: Press the designated STROBE button on the remote switch to activate. Press again to turn off.
The remote switch is powered by a 3V CR1632 button cell battery and features advanced power cut-off (APC) technology for extended standby time.
6.3 NB10000 Power Bank Usage
- Apparat li jiċċarġja: Connect your device to the USB-A or USB-C output port of the NB10000 using an appropriate charging cable.
- Indikatur tal-Livell tal-Enerġija: Press the power button on the NB10000 to check the remaining battery level via the LED indicators.
- Modalità ta 'Kurrent Baxx: For charging delicate electronics (e.g., Bluetooth earphones, smartwatches), activate the low current mode by pressing and holding the power button until a specific indicator lights up.
7. Manutenzjoni
- Tindif: Naddaf il-qafas tat-torċa b'ċarruta ratba u damp drapp. Tużax tindif jew solventi li joborxu.
- Ħjut u ċrieki O: Lubricate the threads and O-rings regularly with silicone grease to maintain water resistance. Replace worn O-rings as needed.
- Kura tal-batterija: Remove batteries if the flashlight will not be used for an extended period. Store batteries in a cool, dry place.
- Port tal-Iċċarġjar: Keep the USB-C charging port clean and free of debris. Ensure the rubber cover is securely closed when not charging.
8 Issolvi l-problemi
- Il-flashlight ma tixgħel:
- Iċċekkja l-polarità tal-batterija.
- Kun żgur li l-batteriji huma kompletament iċċarġjati.
- Issikka l-għatu tad-denb sew.
- Clean battery contacts with an alcohol swab.
- Luminożità mnaqqsa jew ħin ta' tħaddim qasir:
- Batteries may be low; recharge them.
- Batteries may be aging; consider replacement.
- Ensure the flashlight head and tail cap are tightly screwed on.
- Remote switch not responding:
- Check the distance between the remote and the flashlight (max 1 meter).
- Replace the CR1632 battery in the remote switch.
- Kun żgur li l-ebda ostakolu ma jimblokka s-sinjal.
- Kwistjonijiet tal-iċċarġjar:
- Verify the USB-C cable is properly connected.
- Ensure the power source (QC Adapter) is functioning.
- Clean the charging port for any debris.
9. Informazzjoni dwar is-Sigurtà
- Tiddix il-flashlight direttament fl-għajnejn.
- Żomm fejn ma jintlaħaqx mit-tfal.
- Do not disassemble or modify the flashlight or power bank, as this voids the warranty and may cause damage.
- Avoid exposing the devices to extreme temperatures or direct sunlight for prolonged periods.
- Uża biss batteriji u aċċessorji tal-iċċarġjar rakkomandati.
- Armi l-batteriji skont ir-regolamenti lokali.
10. Garanzija u Appoġġ
Nitecore products are covered by a warranty. For detailed warranty information and support, please refer to the official Nitecore webis-sit jew ikkuntattja lid-distributur lokali tiegħek. Żomm l-irċevuta tax-xiri tiegħek għal talbiet ta' garanzija.
Għal aktar għajnuna, żur il- Ħanut Nitecore fuq Amazon or the official Nitecore websit.
