Manwal tal-Utent tal-Gauge tal-Għoli Diġitali b'Żewġ Kolonni Dasqua 3230-8115-A

1. Introduzzjoni

This manual provides comprehensive instructions for the safe and effective use, maintenance, and troubleshooting of your Dasqua 3230-8115-A Digital Dual-Column Height Gauge. Please read this manual thoroughly before operating the device to ensure optimal performance and longevity.

1.1 Prodott Fuqview

The Dasqua 3230-8115-A is a precision digital height gauge designed for accurate measurement of height, depth, and step dimensions. It features a robust dual-column design for stability and a clear digital display for easy reading.

Figura 1.1: Quddiem view of the Dasqua 3230-8115-A Digital Dual-Column Height Gauge, showing the digital display and measuring jaw.

Figura 1.2: Wara view of the height gauge, showing the handwheel for precise vertical adjustment.

Figura 1.3: Dettaljat view highlighting key features such as the fine adjustment mechanism, measuring scale, and stable base.

2. Istruzzjonijiet tas-Sigurtà

To ensure safe operation and prevent damage to the instrument or injury to the user, please observe the following safety guidelines:

• Always handle the height gauge with care to avoid dropping or impacting the instrument, which can affect its precision.
• Keep the instrument clean and free from dust, debris, and corrosive liquids.
• Do not attempt to disassemble or modify the height gauge. Repairs should only be performed by qualified personnel.
• Store the height gauge in its protective case when not in use to prevent damage.
• Evita li tesponi l-istrument għal temperaturi jew umdità estremi.

3. Setup

3.1 Żpakkjar u Spezzjoni Inizjali

Carefully remove the height gauge from its packaging. Inspect the instrument for any signs of damage that may have occurred during transit. Ensure all components listed in the packing list are present.

3.2 Installazzjoni tal-batterija

The digital display requires a CR2032 lithium coin cell battery. To install or replace the battery:

1. Locate the battery compartment cover on the side of the digital display unit.
2. Żerżaq il-kopertura miftuħa fid-direzzjoni indikata mill-vleġġa.
3. Daħħal batterija CR2032 ġdida bin-naħa pożittiva (+) tħares 'il fuq.
4. Agħlaq l-għatu tal-kompartiment tal-batterija sew.

Figure 3.1: Close-up of the battery compartment, showing the location for CR2032 battery insertion.

3.3 Tħejjija għall-Kejl

Place the height gauge on a stable, flat, and clean surface. Ensure the measuring surface of the workpiece is also clean and free of burrs or debris.

4. Istruzzjonijiet Operattivi

4.1 Control Panel Overview

Familiarize yourself with the functions of the buttons on the digital display unit:

Figure 4.1: Digital display control panel with numbered buttons and their corresponding functions.

• 1. ON/OFF: Jixgħel jew jitfi l-unità.
• 2. ZERC/ABS: Switches between Absolute (ABS) and Incremental (INC) measurement modes.
• 3. H/DATA: Holds the displayed value.
• 4. SSET minn qabel: Sets a preset value or origin.
• 5. mm/in: Toggles between millimeter (mm) and inch (in) measurement units.
• 6. +/- / Direction Arrows: Adjusts preset values or moves the cursor in certain modes.

4.2 Basic Measurement Procedure

1. Agħfas il- ON/OFF button to power on the height gauge.
2. Select the desired unit of measurement (mm or inch) by pressing the mm/in buttuna.
3. Clean the measuring surface of the height gauge base and the workpiece.
4. Lower the measuring jaw until it makes contact with the reference surface (e.g., the surface the workpiece rests on).
5. Agħfas il- ZERC/ABS button to set the display to zero at this reference point. This establishes your measurement origin.
6. Carefully raise the measuring jaw using the handwheel until it makes contact with the feature you wish to measure on the workpiece.
7. Aqra l-kejl direttament mid-displej diġitali.

4.3 Adjusting the Measuring Jaw

The measuring jaw can be adjusted for different measurement tasks. Loosen the locking screw, slide the jaw to the desired position, and then tighten the screw to secure it.

Figure 4.2: Illustration of how to adjust and secure the measuring jaw for various applications.

5. Manutenzjoni

5.1 Tindif

Regular cleaning is essential for maintaining the accuracy and lifespan of your height gauge. Use a clean, soft, lint-free cloth to wipe down all surfaces. For stubborn dirt, a small amount of isopropyl alcohol can be used, but avoid contact with the digital display. Never use abrasive cleaners or solvents.

5.2 Ħażna

When not in use, store the height gauge in its original protective case in a dry, temperature-controlled environment. Avoid areas with high humidity, dust, or direct sunlight. Ensure the measuring jaw is not clamped tightly to prevent unnecessary stress on the mechanism.

5.3 Sostituzzjoni tal-batterija

Replace the CR2032 battery when the display becomes dim or shows a low battery indicator. Refer to Section 3.2 for detailed battery installation instructions.

6 Issolvi l-problemi

This section addresses common issues you might encounter with your height gauge. If the problem persists after attempting these solutions, please contact customer support.

7. Speċifikazzjonijiet

Technical specifications for the Dasqua 3230-8115-A Digital Dual-Column Height Gauge:

8. Garanzija u Appoġġ

Dasqua products are manufactured to high quality standards and are typically backed by a manufacturer's warranty. Please refer to the warranty letter included with your product for specific terms and conditions regarding coverage and duration.

Figure 8.1: The height gauge shown alongside its packaging and the included warranty letter.

For technical assistance, spare parts, or warranty claims, please contact your authorized Dasqua dealer or the customer support channel provided at the point of purchase. When contacting support, please have your model number (3230-8115-A) and purchase details ready.