Manwal tal-Istruzzjonijiet tad-Dawl tal-Panel Troffer LED Amico 2x4

1. Prodott Aktarview

This manual provides instructions for the Amico 2x4 LED Troffer Panel Light. This fixture is designed for drop ceilings and features adjustable color temperature (CCT) and wattage settings, along with 0-10V dimming capabilities. It is suitable for various indoor commercial and institutional applications.

Image 1.1: Four Amico 2x4 LED Troffer Panel Lights, illustrating the product's appearance.

2. Informazzjoni dwar is-Sigurtà

Jekk jogħġbok aqra l-istruzzjonijiet kollha bir-reqqa qabel l-installazzjoni u l-użu. Żomm dan il-manwal għal referenza futura.

• Sigurtà Elettrika: Installation should be performed by a qualified electrician in accordance with national and local electrical codes. Ensure power is disconnected at the circuit breaker before installation or maintenance.
• L-ertjar: The fixture must be properly grounded to prevent potential electrical shock.
• Voltage: Ivverifika li l-provvista voltage hija kompatibbli mal-volum operattiv tal-apparattage (10 Volts DC for control, consult product label for main power).
• Użu fuq ġewwa biss: Dan il-prodott huwa ddisinjat għal użu fuq ġewwa f'postijiet niexfa. Tesponihx għall-umdità jew temperaturi estremi.
• Immaniġġjar: Handle the fixture with care to avoid damage to components.

3. Kontenut tal-Pakkett

Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni:

• Amico 2x4 LED Troffer Panel Light(s)
• Ħardwer tal-Immuntar

4. Istruzzjonijiet ta 'installazzjoni

The Amico 2x4 LED Troffer Panel Light is designed for easy installation in standard drop ceilings using its built-in clips and included mounting hardware.

4.1 Passi ta' Qabel l-Installazzjoni

1. Skonnettjar tal-Enerġija: Itfi l-enerġija mis-circuit breaker qabel tibda kwalunkwe xogħol elettriku.
2. Spezzjoni tal-Apparat: Unpack the fixture and inspect it for any damage. Do not install if damaged.
3. Ipprepara l-Ftuħ tas-Saqaf: Ensure the ceiling grid opening is appropriate for a 2x4 (approximately 23.74" x 47.76") panel light.

4.2 Wajers

1. Connect the AC power supply wires to the fixture's input wires (Line, Neutral, Ground) according to local electrical codes.
2. If using 0-10V dimming, connect the dimming wires (purple and gray) from the fixture to the compatible 0-10V dimmer switch. Ensure polarity is correct.
3. Secure all wire connections with appropriate connectors.

4.3 Immuntar

1. Carefully lift the LED panel into the ceiling grid opening.
2. Engage the built-in clips on the sides of the fixture with the ceiling grid rails to secure the panel in place.
3. For added security, use the provided mounting hardware to attach the fixture to the building structure, if required by local codes or desired.

Image 4.1: Product dimensions (47.76"L x 23.74"W x 1.91"H) for installation planning.

5. Istruzzjonijiet Operattivi

The Amico LED Troffer Panel Light offers adjustable wattage and color temperature settings to customize your lighting environment.

5.1 Adjusting Wattage (Brightness)

The fixture features a toggle switch on the back to select the desired wattage, which directly affects the brightness (lumens). Choose from 25W, 30W, 35W, 40W, or 50W.

Image 5.1: Location of the 5-position power toggle switch for wattagAġġustament.

Image 5.2: Visual representation of brightness levels at 25W, 30W, 35W, 40W, and 50W.

5.2 Adjusting Color Temperature (CCT)

A separate toggle switch on the back of the fixture allows you to select the desired color temperature: 3000K (Warm White), 3500K (Neutral White), 4000K (Cool White), or 5000K (Daylight White).

Image 5.3: Location of the 4-position CCT toggle switch for color temperature adjustment.

Immaġni 5.4: Eż.amples of different color temperatures (3000K, 3500K, 4000K, 5000K) in various environments.

5.3 0-10V Dimming

The fixture supports 0-10V dimming, allowing for smooth brightness adjustment from 0% to 100% when connected to a compatible 0-10V dimmer switch.

Image 5.5: Illustration of 0-10V dimming capability in a conference room setting.

6. Manutenzjoni

The Amico LED Troffer Panel Light requires minimal maintenance.

• Tindif: Kun żgur li l-elettriku jkun mitfi qabel ma tnaddaf. Imsaħ l-apparat b'ċarruta ratba, niexfa, jew kemxejn imxarrba.amp drapp. Tużax tindif jew solventi li joborxu.
• L-ebda Partijiet li jistgħu jservu mill-utent: The LED chips and driver are integrated and not user-serviceable. Attempting to open or modify the fixture will void the warranty.
• It-tul tal-ħajja: The fixture is designed for over 50,000 hours of continuous operation.

Image 6.1: Internal components of the LED Troffer Panel Light, highlighting its durable design.

7 Issolvi l-problemi

If you encounter issues with your Amico LED Troffer Panel Light, refer to the following common troubleshooting steps:

Jekk dawn il-passi ma jsolvux il-problema, ikkuntattja l-appoġġ għall-klijenti.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

The Amico 2x4 LED Troffer Panel Light comes with a limited warranty. For specific warranty terms and conditions, please refer to the product packaging or contact Amico customer service.

For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact Amico customer support through their official channels.