VPFET 4-Port KVM Switch User Manual

Introduzzjoni

This manual provides detailed instructions for the installation, operation, and maintenance of your VPFET 4-Port KVM Switch. This device allows up to four computers to share three monitors (one HDMI, two DisplayPort), a single keyboard, mouse, and other USB 3.0 peripherals. It supports high resolutions up to 8K@60Hz and 4K@144Hz, making it suitable for demanding visual applications and gaming.

Image: The VPFET KVM switch positioned on a desk, facilitating the connection of three monitors to multiple computer towers.

Kontenut tal-Pakkett

Iċċekkja li l-oġġetti kollha elenkati hawn taħt huma inklużi fil-pakkett tiegħek:

• 1 x VPFET 4-Port KVM Switch (8K HDMI & DP KVM Switch 4x3)
• 1 x Riċevitur IR
• 1 x Kontroll mill-bogħod IR
• 4 x USB 3.0 A-A Cables
• 1 x Adapter tal-Enerġija DC12V
• 1 x Manwal tal-Utent (dan id-dokument)

Image: An illustration detailing the contents of the product package, including the KVM switch unit and all accompanying cables and accessories.

Prodott Overview u Konnessjonijiet

Familiarize yourself with the KVM switch's ports and indicators before proceeding with the setup.

Image: A comprehensive connection diagram illustrating how to connect four PCs to the KVM switch using HDMI, DisplayPort, and USB 3.0 cables, and how the KVM switch outputs to three monitors.

Panel ta' quddiem:

• USB 3.0 Ports (1-4): Connect your keyboard, mouse, USB drives, printers, or other USB 3.0 peripherals.
• IR Port: Connect the included IR receiver for remote control functionality.
• PC Selection Buttons (PC1-PC4): Ibdel manwalment bejn kompjuters konnessi.
• Indikaturi LED: Show the currently active PC.

Panel ta 'wara:

• PC IN Ports (PC1-PC4): Each PC input requires:
  • 1 x Input HDMI
  • 2 x DisplayPort Inputs (DP1, DP2)
  • 1 x USB 3.0 Input (Type-B)
• DP OUT Ports (DP1 OUT, DP2 OUT): Connect to your DisplayPort monitors.
• Port HDMI OUT: Connect to your HDMI monitor.
• Dħul tal-Enerġija DC12V: Qabbad l-adapter tal-enerġija pprovdut.
• Swiċċ mixgħul / mitfi: Power control for the KVM switch.

Setup Istruzzjonijiet

Follow these steps to connect your computers and monitors to the KVM switch.

1. Itfi l-Apparati Kollha: Ensure all computers and monitors are powered off before making any connections.
2. Connect Monitors to KVM Output:
   • Qabbad il-monitor HDMI tiegħek mal- HDMI OUT port fuq is-swiċċ KVM.
   • Connect your two DisplayPort monitors to the DP1 OUT u DP2 OUT portijiet fuq is-swiċċ KVM.
3. Connect Computers to KVM Input: For each computer (PC1, PC2, PC3, PC4):
   • Connect the computer's HDMI output to the corresponding HDMI-IN port fuq is-swiċċ KVM.
   • Connect the computer's two DisplayPort outputs to the corresponding DP1 IN u DP2 IN portijiet fuq is-swiċċ KVM.
   • Connect the computer's USB 3.0 port to the corresponding USB 3.0 IN (Type-B) port on the KVM switch using the provided USB 3.0 A-A cable. (Importanti: Each PC must be connected via a USB cable to the KVM for USB peripherals to function.)

   Note: Your computer must support three monitors or multiple monitor outputs to fully utilize this KVM switch's triple monitor functionality.

4. Qabbad il-Periferali tal-USB: Connect your keyboard, mouse, and other USB 3.0 devices to the USB 3.0 Ports (1-4) on the front panel of the KVM switch. (Bluetooth mice are not supported.)
5. Qabbad ir-Riċevitur tal-IR: Plug the IR receiver into the Port IR fuq il-pannell ta’ quddiem.
6. Power On KVM Switch: Connect the DC12V power adapter to the Input ta 'Qawwa DC12V and plug it into a power outlet. Turn on the KVM switch using the ON/OFF swiċċ.
7. Apparat ta' Qawwa: Ixgħel il-moniters tiegħek u mbagħad il-kompjuters tiegħek.

Istruzzjonijiet Operattivi

The VPFET KVM switch offers two methods for switching between connected computers:

Image: A visual guide demonstrating the two primary methods for switching between connected computers: via the remote control and directly using the KVM switch's front panel buttons.

1. Button Switching:

Agħfas il-korrispondenti PC1, PC2, PC3, or PC4 button on the front panel of the KVM switch to select the desired computer. The LED indicator next to the button will illuminate to show the active PC.

2. Infrared (IR) Remote Control:

Use the included IR remote control to switch between computers. Point the remote at the IR receiver connected to the KVM switch and press the button corresponding to the desired PC (1, 2, 3, or 4). The LED indicator on the KVM switch will update to reflect the active PC.

Note: Hotkey switching is not supported by this KVM switch.

Resolution and Performance Notes

This KVM switch supports high resolutions and refresh rates. To achieve optimal performance, consider the following:

Image: A visual representation highlighting the KVM switch's capability to support high resolutions such as 8K@60Hz and 4K@144Hz, compatible with HDMI 2.1 and DisplayPort 1.4 standards.

• Riżoluzzjoni massima: Supports up to 8K@60Hz and 4K@144Hz. It is backward compatible with lower resolutions.
• Rekwiżiti tas-Sistema: For 8K resolution, ensure your source device (PC), monitors, and all connecting cables (HDMI and DisplayPort) support 8K.
• Kwalità tal-Kejbil: The quality and length of your HDMI and DisplayPort cables significantly impact video transmission quality. Shorter, high-quality cables are recommended for optimal performance, especially at higher resolutions and refresh rates.

Funzjonalità tal-USB 3.0

The KVM switch includes four USB 3.0 ports for sharing peripherals between your connected computers.

Immaġni: Dettaljata view of the KVM switch's USB 3.0 ports, emphasizing their high-speed data transfer capabilities up to 5Gbps, significantly faster than USB 2.0.

• Veloċità tat-Trasferiment tad-Dejta: USB 3.0 ports support data transfer speeds up to 5 Gbit/s.
• Peripheral Compatibility: Connect keyboards, mice, USB flash drives, printers, and other USB devices.
• Connection Requirement: Ensure each computer is connected to the KVM switch via its dedicated USB 3.0 A-A cable. If a computer is not connected via USB, its USB peripherals will not be recognized by the KVM switch.
• Apparat Bluetooth: Bluetooth mice and other Bluetooth peripherals are not supported directly through the KVM's USB ports.

Issolvi l-problemi

Jekk tiltaqa' ma' problemi, irreferi għall-passi komuni li ġejjin għas-soluzzjoni tal-problemi:

1. L-ebda Wiri fuq il-Monituri:
   • Verify all HDMI and DisplayPort cables are securely connected between the computers, KVM switch, and monitors.
   • Ensure the KVM switch is powered on and the correct PC input is selected.
   • Check if your computers and monitors are powered on and functioning correctly independently.
   • Confirm that your computer's graphics card supports the number of monitors and the resolutions you are attempting to use.
   • Try using shorter, high-quality cables, especially for high-resolution setups.
2. Il-Periferali USB Mhux Jaħdmu:
   • Ensure each computer is connected to the KVM switch via its dedicated USB 3.0 A-A cable.
   • Try connecting the USB peripheral directly to the computer to confirm it is functional.
   • Erġa' ibda s-swiċċ tal-KVM u l-kompjuters konnessi.
   • Note that Bluetooth mice are not supported.
3. Intermittent Display or Flickering:
   • This can often be caused by long or low-quality HDMI/DisplayPort cables, especially at high resolutions. Replace with certified high-speed cables.
   • Żgura li l-konnessjonijiet kollha huma stretti.
   • Reduce the resolution or refresh rate to see if the issue persists.
4. Dewmien tal-bidla:
   • A brief delay during switching is normal as the KVM re-establishes connections with the new source. This is more noticeable with higher resolutions and multiple monitors.
5. Il-Kontroll mill-bogħod Mhux Jaħdem:
   • Ensure the IR receiver is properly plugged into the KVM switch's IR port.
   • Iċċekkja l-batterija fil-kontroll mill-bogħod.
   • Kun żgur li m'hemm l-ebda ostaklu bejn ir-remote u r-riċevitur tal-IR.

Speċifikazzjonijiet

Manutenzjoni

Biex tiżgura l-lonġevità u l-prestazzjoni ottimali tas-swiċċ KVM tiegħek, segwi dawn il-linji gwida ta' manutenzjoni:

• Tindif: Uża drapp artab u niexef biex tnaddaf il-barra tal-apparat. Evita prodotti tat-tindif likwidi jew materjali li joborxu.
• Ventilazzjoni: Ensure the KVM switch is placed in a well-ventilated area to prevent overheating. Do not block ventilation openings.
• Qawwa: Always use the provided DC12V power adapter. Disconnect power during electrical storms or when unused for long periods.
• Ambjent: Żomm l-apparat 'il bogħod minn sħana eċċessiva, umdità, trab, u dawl tax-xemx dirett.

Appoġġ

If you encounter any issues that cannot be resolved using the troubleshooting guide, or if you require further assistance, please contact VPFET customer support. Refer to your product packaging or the VPFET official websit għad-dettalji tal-kuntatt.

VPFET is committed to providing reliable products and customer satisfaction. Our professional technical team is available to assist you.