Manwal tal-Utent tal-Starter tal-Qabża Portabbli ACEZUK 5000A

Introduzzjoni

Thank you for choosing the ACEZUK 5000A Portable Jump Starter. This device is designed to provide a reliable and powerful solution for starting dead vehicle batteries, as well as serving as a portable power bank and emergency light source. Please read this manual thoroughly before use to ensure safe and optimal operation.

Informazzjoni dwar is-Sigurtà

Dejjem osserva l-prekawzjonijiet ta' sigurtà li ġejjin biex tevita korriment jew ħsara lill-apparat u lill-vettura:

• Ensure the jump starter is fully charged before use, especially for jump-starting.
• Tippruvax tibda taqbeż batterija ffriżata.
• Qabbad il-clamps correctly: Red to positive (+), Black to negative (-). Reverse polarity can cause damage.
• Tħallix l-aħmar u iswed clamps to touch each other once connected to the jump starter.
• Neħħi l-clamps from the vehicle battery immediately after the vehicle starts.
• Żomm l-apparat 'il bogħod mit-tfal.
• Aħżen f'post frisk u niexef 'il bogħod mix-xemx diretta u minn temperaturi għoljin.
• This device features 8 smart protections including over temperature, over charge, over discharge, over current, over voltage, short circuit, reverse polarity, and anti-interference protection. However, always follow proper connection procedures.

Figure 1: Illustration of the 8 smart clamp protections for enhanced safety.

X'inhu Inkluż

Your ACEZUK 5000A Portable Jump Starter package includes:

• 1 x ACEZUK Portable Jump Starter
• 1 x Smart Jumper Cables with 12V Display Clip
• 1 x Cable tal-Iċċarġjar USB-C
• 1 x Manwal tal-Utent (dan id-dokument)
• 1 x Storage Box/Portable Carry Case

Figure 2: Contents of the ACEZUK Jump Starter package.

Karatteristiċi tal-Prodott

• Bidu Qawwi tal-Qabża: Delivers 5000A peak current, capable of starting 12V vehicles with up to 10.0L gas or 8.0L diesel engines. Operates effectively in extreme temperatures (-4°F to 140°F).
• Wiri LED Viżibbli: A large, clear display shows battery percentage and operational status, eliminating guesswork.
• Bank tal-Enerġija li jinġarr: Equipped with multiple USB output ports (USB-Out 1: 5V-3A, 9V-2A, 12V-1.5A; USB-Out 2: 5V-2.4A) and a USB-C input (5V-2A, 9V-2A, 12V-1.5A) for charging various electronic devices.
• Multi-mode LED Emergency Torch: Features a bright LED light with Flashlight, Strobe, SOS, and Warning light modes for various emergency situations.
• Teknoloġija ta' Protezzjoni Avvanzata: Incorporates 8 smart protections: reverse polarity, reverse connection, over current, over voltage, overload, over-charge, over-discharge, and short circuit protection. The smart clamps are constructed with all-metal for durability.

Figure 3: 5000A Peak Current capability for different vehicle types.

Figure 4: Clear 2-inch LCD display for easy monitoring.

Figure 5: The jump starter functioning as a portable power bank.

Figure 6: The versatile 400 Lumen LED light modes.

Setup

Iċċarġjar tal-Jump Starter

Before first use, fully charge the jump starter. It is recommended to recharge the unit every 3-6 months to maintain battery health, even if not used.

1. Connect the provided USB-C charging cable to the USB-C IN port on the jump starter.
2. Qabbad it-tarf l-ieħor tal-kejbil USB-C ma' adapter tal-ħajt USB kompatibbli (mhux inkluż).
3. The LED display will show the charging progress. The unit is fully charged when the display shows 100%.

Connecting the Smart Jumper Cables

The smart jumper cables connect to the dedicated EC5 output port on the jump starter. Ensure a firm connection.

Figure 7: Visual guide for jump start connection steps.

Istruzzjonijiet Operattivi

Aqbeż Tibda Vettura

1. Prepare the Jump Starter: Ensure the jump starter has sufficient charge (at least 50% recommended).
2. Connect Smart Jumper Cables: Insert the blue plug of the smart jumper cables into the EC5 output port on the jump starter. The display on the smart cable will light up.
3. Qabbad mal-Batterija tal-Vettura:
   • Qabbad il- aħmar (+) clamp għat-terminal pożittiv tal-batterija tal-vettura.
   • Qabbad il- iswed (-) clamp mat-terminal negattiv tal-batterija tal-vettura.

   The smart cable display will show the battery voltage. If the connection is correct, the indicator light on the smart cable will turn solid green.
4. Ibda l-Vettura: Return to the vehicle and start the engine.
5. Neħħi Clamps: Once the vehicle starts, immediately remove the smart jumper cables from the vehicle battery, then disconnect the blue plug from the jump starter.

Note: If the vehicle does not start on the first attempt, wait at least 30 seconds before trying again. Do not attempt more than 3 consecutive jump starts.

Uża bħala Bank tal-Enerġija Portable

The jump starter can charge various USB-powered devices.

1. Open the rubber cover on the side of the jump starter to reveal the USB output ports.
2. Connect your device's charging cable to one of the USB-OUT ports.
3. Il-jump starter jibda jiċċarġja t-tagħmir tiegħek awtomatikament.

L-Użu tat-Torċa ta' Emerġenza LED

The built-in LED light has multiple modes for different situations.

1. Press and hold the power button for 3 seconds to turn on the LED light (Bright mode).
2. Press the power button once to cycle through the modes: Bright → Strobe → SOS → Warning Light (Red/Blue flashing).
3. Press and hold the power button again for 3 seconds to turn off the LED light.

Manutenzjoni

• Iċċarġjar mill-ġdid: For optimal battery life, recharge the jump starter every 3-6 months, even if not in use.
• Tindif: Wipe the unit with a dry, soft cloth. Do not use harsh chemicals or abrasive materials.
• Ħażna: Store the jump starter in its provided storage case in a cool, dry place. Avoid extreme temperatures.

Issolvi l-problemi

Speċifikazzjonijiet

Garanzija u Appoġġ

For warranty information or technical support, please contact ACEZUK directly.

Kuntatt Email: ACEZUK@outlook.com

Please have your model number (M02-US) and purchase details ready when contacting support.