Manwal tal-Utent tat-Tejp tal-Kejl Retrattili Intelliġenti RENPHO

1. Introduzzjoni

This manual provides instructions for the RENPHO Smart Retractable Tape Measure, Model RF-BMF01. This device is designed to accurately measure body circumference and length, integrating with the RENPHO Health App via Bluetooth for tracking and analysis of measurements related to fitness, weight management, and general body progress.

2. Informazzjoni dwar is-Sigurtà

• Tippruvax tiżżarma jew timmodifika l-apparat.
• Żomm l-apparat 'il bogħod mill-ilma u temperaturi estremi.
• Handle the tape measure carefully to avoid injury. The tape is flexible but can cause minor cuts if mishandled.
• Żomm fejn ma jintlaħaqx mit-tfal.
• The device contains a Lithium metal battery. Dispose of batteries according to local regulations.

3. Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett tiegħek:

• 1 x RENPHO Smart Retractable Tape Measure
• 1 x Manwal għall-Utent
• 1 x Lithium metal battery (pre-installed or included separately)

4. Prodott Aktarview

The RENPHO Smart Retractable Tape Measure is a compact, digital measuring device. It features an LCD screen for clear readings and three control buttons for operation. The tape itself is 1.5 meters (approximately 60 inches) long and is designed for both length and circumference measurements.

Image 4.1: RENPHO Smart Retractable Tape Measure and companion app.

Karatteristiċi ewlenin:

• Konnettività Bluetooth: Connects to the RENPHO Health App for automatic data synchronization and historical tracking.
• Display LCD kbir: Provides clear and immediate measurement readings.
• Modi ta' Kejl Doppju: Supports "Length Mode" for straight-line measurements and "Circumference Mode" for body parts.
• Easy Lock Hook Design: Facilitates single-hand operation for self-measurement.
• Qlib tal-Unità: Easily switch between inches and centimeters.

5. Setup

5.1 Installazzjoni tal-batterija

The device uses one CR2032 Lithium metal battery. If not pre-installed, open the battery compartment by turning the cover as indicated by the arrows. Insert the battery with the positive (+) side facing up, then close the compartment securely.

5.2 Tniżżil u Tqabbil tal-App

1. Niżżel il- App tas-Saħħa RENPHO from your device's app store (iOS or Android). You can scan the QR code below for direct access.

Image 5.1: App download instructions and visual representation of measurements with the RENPHO Health App. Scan the QR code in the image or visit qrco.de/bcTpOZ biex tniżżel l-app.
2. Kun żgur li l-Bluetooth huwa attivat fuq l-ismartphone tiegħek.
3. Open the RENPHO Health App and create an account or log in.
4. Turn on the tape measure by pressing the power button.
5. In the app, navigate to the "Circumferences" section or add a new device. The app should detect the tape measure via Bluetooth. Follow the on-screen prompts to pair the device.

6. Istruzzjonijiet Operattivi

6.1 Power On/Off

Press the power button (usually the middle button) to turn the device on. The device will automatically turn off after a period of inactivity to conserve battery.

6.2 Switching Units (Inches/Centimeters)

Short press the "M" button to toggle between inches (in) and centimeters (cm) on the display.

6.3 Modi ta' Kejl

The tape measure offers two modes:

• Length Mode: For straight-line measurements.
• Circumference Mode: For measuring body parts. In this mode, a 2.1 cm (0.84 inch) gap is accounted for to ensure accurate circumference readings when the tape head is inserted into the receptacle.

Long press the "M" button to switch between these two modes.

Image 6.1: Illustration of Length Mode and Circumference Mode with unit switching.

6.4 Teħid tal-Kejl

1. Pull out the tape to the desired length.
2. For circumference measurements, use the easy-lock hook design to secure the tape around the body part. This allows for single-hand operation.


Image 6.2: Demonstrating the easy lock hook design for effortless single-hand operation.

3. Read the measurement on the LCD screen.
4. To save the measurement to the app, ensure the device is paired and the app is open in the "Circumferences" section. The measurement will typically synchronize automatically. If not, press the save button on the device (if available, or confirm in the app).
5. Press the retract button to retract the tape.

6.5 Using the RENPHO Health App

L-app tippermettilek li:

• Track measurements over time for various body parts (e.g., waist, chest, biceps, hips).
• View historical data in clear graphs and charts.
• Set goals and monitor progress for weight loss, muscle gain, or fitness.
• Oħloq utenti multipli profiles, including a "Baby Mode" for tracking infant growth.


Image 6.3: Accurate tracking of body measurements with clear graphics on the RENPHO Health App.


Image 6.4: Baby Mode feature in the RENPHO Health App for documenting infant growth.

7. Manutenzjoni

• Clean the device with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
• Store the tape measure in a cool, dry place when not in use.
• Replace the battery when the display becomes dim or the device fails to power on.

8 Issolvi l-problemi

9. Speċifikazzjonijiet

Immaġni 9.1: Dimensjonijiet tal-prodott.

10. Garanzija u Appoġġ

RENPHO provides a warranty for this product. Please refer to the official RENPHO webis-sit jew id-dokumentazzjoni tax-xiri tiegħek għal termini u kundizzjonijiet speċifiċi tal-garanzija.

For technical support, troubleshooting assistance, or warranty claims, please contact RENPHO customer service through their official website or the RENPHO Health App.

Disponibbiltà ta' Spare Parts: 2 Snin

11. Vidjows Uffiċjali tal-Prodott

The following videos provide additional visual guidance on using your RENPHO Smart Retractable Tape Measure: