Manwal tal-Istruzzjonijiet tal-Magna tas-Silġ Kummerċjali ADT HZB-45YY

1. Introduzzjoni

Thank you for choosing the ADT HZB-45YY Commercial Ice Maker. This manual provides essential information for the safe operation, installation, maintenance, and troubleshooting of your new ice machine. Please read this manual thoroughly before operating the appliance and retain it for future reference.

Deskrizzjoni tal-Immaġni: A quddiem view of the ADT HZB-45YY Commercial Ice Maker, featuring a stainless steel finish and a black top. An overlay highlights the unique crescent-shaped ice cubes produced by the machine.

2. Informazzjoni dwar is-Sigurtà

To prevent injury to users or damage to the appliance, observe all safety precautions. This appliance is intended for commercial use. Always ensure proper grounding and ventilation.

• Tħaddimx il-magna b'korda tal-enerġija jew plagg bil-ħsara.
• Kun żgur li l-magna titqiegħed fuq wiċċ stabbli u livell.
• Żomm il-fetħiet tal-ventilazzjoni mingħajr ostakli.
• Taħżinx sustanzi splussivi bħal bottijiet aerosol bi propellant li jaqbad f'dan l-apparat.
• Skonnettja mill-provvista tal-elettriku qabel ma tnaddaf jew tagħmel manutenzjoni.

3. Kontenut tal-Pakkett

Iċċekkja li l-oġġetti kollha huma preżenti fl-imballaġġ:

• ADT HZB-45YY Commercial Ice Maker Unit
• Scoop tas-Silġ
• In-Line Water Hose
• Ixxotta pajp
• Gallon-Bottled Water Hose
• Manwal ta 'Istruzzjoni (dan id-dokument)

Deskrizzjoni tal-Immaġni: This image displays the ADT HZB-45YY ice maker with its approximate dimensions (17.6 inches width, 15.7 inches depth, 31.4 inches height). Below the unit, the included accessories are shown: an ice scoop, an in-line water hose, a drain hose, and a hose for gallon-bottled water connection.

4. Prodott Aktarview u Karatteristiċi

The ADT HZB-45YY is a high-efficiency commercial ice maker designed for reliable ice production. Key features include:

• Crescent-Shaped Ice Cubes: Unique design for slow-melting ice, ideal for beverages.
• Kapaċità Għolja ta' Kuljum: Produces up to 121 lbs (55 kg) of ice per day.
• Produzzjoni ta' Silġ Mgħaġġla: Each ice-making cycle takes approximately 13-20 minutes.
• Efficient Evaporator: Features a 4x8 two-sided evaporator for consistent performance.
• Kostruzzjoni Durabbli: Sleek stainless steel design, rust-resistant and built for longevity.
• Panel tal-Kontroll Diġitali: Intuitive LCD panel for easy operation and settings adjustment.
• Funzjoni ta' Awto-Tindif: Jissimplifika l-manutenzjoni.
• Time Reservation: Allows setting ice production time in advance.

Deskrizzjoni tal-Immaġni: A banner highlighting eight core technologies of the ADT ice maker, represented by icons and text: Stainless Steel Body, Powerful Compressor, Energy Saving, Blue Light, Digital Control, Foamed Insulation, Self Cleaning, and Time Reservation.

Deskrizzjoni tal-Immaġni: This image illustrates the different thicknesses of crescent-shaped ice cubes the machine can produce, along with their approximate production times: Thin Ice Cube (5-9 minutes), Medium Ice Cube (9-15 minutes), and Thick Ice Cube (15-25 minutes).

5. Setup u Installazzjoni

Installazzjoni xierqa hija kruċjali għal prestazzjoni u sigurtà ottimali.

5.1 Disimballaġġ

1. Neħħi l-magna tas-silġ mill-ippakkjar tagħha bir-reqqa.
2. Neħħi l-materjali tal-ippakkjar kollha, it-tejp, u l-film protettiv.
3. Spezzjona l-unità għal kwalunkwe ħsara waqt it-tbaħħir. Ikkuntattja lill-bejjiegħ tiegħek immedjatament jekk issib ħsara.

5.2 Tqegħid

• Poġġi l-magna tas-silġ fuq wiċċ sod u livellat li kapaċi jsostni l-piż tagħha meta tkun mimlija bis-silġ u l-ilma.
• Aċċerta ruħek li jkun hemm ventilazzjoni adegwata madwar l-unità. Żomm mill-inqas 5 pulzieri (12.7 ċm) ta’ spazju mill-ħitan u apparat ieħor.
• Evita dawl tax-xemx dirett jew sorsi tas-sħana.
• It-temperatura ambjentali għandha tkun bejn 50°F (10°C) u 90°F (32°C).

5.3 Konnessjoni tal-Ilma

The ADT HZB-45YY offers two methods for water supply:

1. In-Line Water Supply: Connect the provided in-line hose to a potable water source with appropriate pressure. Ensure all connections are secure to prevent leaks.
2. Gallon-Bottled Water Supply: Use the provided hose to connect to a standard gallon-bottled water dispenser.

Ensure the drain hose is properly connected and directed to a suitable drain to prevent water overflow.

Deskrizzjoni tal-Immaġni: This image demonstrates the two water input options for the ice maker. On the right, an 'In-line' connection shows a hose leading to a faucet. On the left, a 'Gallon-bottled water' connection shows a hose leading to a large water bottle.

Deskrizzjoni tal-Immaġni: A dettaljata view of the ice maker's back panel, highlighting the connection points for easy installation. Labels indicate the 'Water outlet', 'Power line', 'In-line' water intake, and 'Gallon-bottled water' intake.

5.4 Konnessjoni Elettrika

• Żgura li l-iżbokk tad-dawl jaqbel mal-voltage requirements of the ice maker (115 Volts).
• Ipplaggja l-korda tal-enerġija f'sokit elettriku ertjat. Tużax kordi ta' estensjoni jew adapters.

6. Istruzzjonijiet Operattivi

Iffamiljarizza ruħek mal-pannell tal-kontroll u l-operazzjonijiet bażiċi.

6.1 Control Panel Overview

Deskrizzjoni tal-Immaġni: A detailed close-up of the ice maker's LCD control panel. The panel displays temperature and ice-making status. Buttons are labeled with their functions: 'LIGHT' (turns on blue light), 'TIMER' (for reservation time setting), 'CLEAN' (press for 5 seconds for self-cleaning), 'ON/OFF' (power button), and '+/-' (adjusts ice making process and time).

• DAWL: Activates the internal blue light.
• TIMER: Press to enter the reservation time setting for delayed ice production.
• NADIF: Press and hold for 5 seconds to initiate the self-cleaning function.
• ON/OFF: Jixgħel jew jitfi l-unità.
• +/-: Used to adjust ice making duration or set timer values.

6.2 Start-up Inizjali

1. Wara li tqabbad l-ilma u l-elettriku, agħfas il-buttuna ON/OFF buttuna biex tibda l-magna.
2. The machine will begin its first ice-making cycle. The first few batches of ice may be smaller or irregular; discard them.

6.3 Produzzjoni tas-Silġ

• The machine produces up to 64 pieces of ice per cycle.
• Cycle duration is typically 13-20 minutes, depending on ambient temperature and water temperature.
• Uża l- +/- buttons to adjust the ice-making time, which influences the thickness of the ice cubes. Longer times result in thicker ice.

Deskrizzjoni tal-Immaġni: A close-up view of the ADT ice maker's front panel, highlighting its performance metrics. Text overlays indicate a '120lbs Daily Capacity' and '64 pcs ice per cycle, 13-20 mins one time'.

6.4 Ice Making Reservation

Biex tissettja ħin tal-bidu mdewwem għall-produzzjoni tas-silġ:

1. With the machine in standby mode, press the TIMER buttuna.
2. Uża l- +/- buttons to set the desired delay time (in hours).
3. Agħfas TIMER again to confirm. The machine will start automatically after the set time.

Deskrizzjoni tal-Immaġni: The ADT ice maker is shown in a modern room setting, positioned near a window and a plant. Text on the image highlights the 'ICE MAKING RESERVATION' feature, explaining that users can 'Set the ice making time in advance to save waiting time'.

7. Manutenzjoni

Regular cleaning and maintenance ensure the longevity and hygiene of your ice maker.

7.1 Funzjoni ta' Awto-Tindif

The machine is equipped with a self-cleaning feature:

1. Kun żgur li l-magna hija konnessa ma' provvista tal-ilma u drenaġġ.
2. Agħfas u żomm il- NADIF buttuna għal 5 sekondi.
3. The machine will automatically run a cleaning cycle.
4. Once complete, drain any remaining water.

7.2 Tindif manwali

• Barra: Wipe the exterior with a soft cloth and mild detergent. Do not use abrasive cleaners.
• Intern: For thorough cleaning, disconnect power. Remove any remaining ice. Clean the ice storage bin and water reservoir with a solution of water and white vinegar or a food-grade ice maker cleaner. Rinse thoroughly with clean water.
• Evaporatur: Periodically inspect the evaporator plates for mineral buildup. Clean gently with a soft brush if necessary.
• Filtru tal-Arja: The air filter (if present, typically on the front or side grille) should be cleaned monthly. Remove and wash with warm, soapy water, then dry completely before reinstalling.

Deskrizzjoni tal-Immaġni: A close-up view of the ice maker's internal evaporator plates, which are responsible for forming the ice cubes.

8 Issolvi l-problemi

Irreferi għal din it-taqsima għal kwistjonijiet komuni u s-soluzzjonijiet tagħhom.

If the problem persists after attempting these solutions, please contact ADT customer support.

9. Speċifikazzjonijiet

10. Garanzija u Appoġġ

ADT provides a one-year warranty for this product from the date of purchase. This warranty covers manufacturing defects under normal use. Additionally, a 30-day return policy is offered.

For warranty claims, technical support, or any inquiries, please contact ADT customer service through the retailer where the product was purchased or visit the official ADT websit.