HORIBA LAQUA EC220-K Handheld EC Meter Instruction Manual

1. Introduzzjoni

The HORIBA LAQUA EC220-K is a robust, handheld, and waterproof meter designed for precise water quality testing in various environments. This device accurately measures conductivity (EC), resistivity (RES), salinity (SAL), total dissolved solids (TDS), and temperature. Its durable construction and user-friendly features make it suitable for both laboratory and outdoor field applications.

Il-karatteristiċi ewlenin jinkludu:

• Disinn li ma jgħaddix ilma minnu: IP67 rated for dust and water resistance, ensuring reliability in challenging conditions.
• Funzjonalità Avvanzata: Offers automatic and manual EC calibration, adjustable reference temperature, temperature coefficient, cell constant, and selectable measurement units.
• Expansive Measurement Ranges: Capable of measuring conductivity, resistivity, salinity, total dissolved solids, and temperature with high resolution and accuracy.
• Kostruzzjoni Durabbli: Features a shock and scratch-resistant non-slip casing, a built-in electrode stand, and a foldable meter stand.
• Karatteristiċi faċli għall-utent: Includes auto log data, built-in memory for up to 500 data points, auto stable, auto hold, real-time measurement modes, and a custom LCD with backlight for clear readings.

2. Informazzjoni dwar is-Sigurtà

Please read and understand all safety precautions before operating the HORIBA LAQUA EC220-K meter. Failure to do so may result in injury or damage to the instrument.

• Do not attempt to disassemble or modify the meter. This may void the warranty and cause damage.
• Ensure the battery compartment is securely sealed to maintain the IP67 rating, especially when operating in wet conditions.
• Handle the sensor with care. Avoid dropping or subjecting it to excessive force.
• Keep the meter and sensor away from strong magnetic fields or corrosive chemicals unless specifically designed for such exposure.
• Use only specified batteries (2 AA) for operation.

3. Kontenut tal-Pakkett

Iċċekkja li l-oġġetti kollha huma preżenti meta tiftaħ il-pakkett:

• HORIBA LAQUA EC220-K Meter
• EC Sensor (Model 9383-10D)
• Calibration Solutions (as packaged)
• 2 Batteriji AA
• Manwal ta' Istruzzjoni
• Kawża tal-Ġarr

4. Prodott Aktarview

The image displays the HORIBA LAQUA EC220-K handheld meter in black, with its digital LCD showing 'COND', '25.0°C ATC', and a reading of '1413 µS/cm'. The meter features control buttons for CAL, MEAS, DATA, MODE, SET, ENT, and power. An EC sensor, labeled HORIBA, is connected to the right side of the meter.

4.1. Meter Components

• Display LCD: Shows measurement readings, temperature, battery status, and operational icons.
• Buttuna CAL: Initiates calibration mode.
• Buttuna MEAS: Switches to measurement mode.
• DATA Button: Accesses stored data.
• Buttuna MODE: Cycles through measurement parameters (EC, TDS, SAL, RES).
• Buttuna SET: Enters setup menu for advanced settings.
• Buttuna ENT: Confirms selections or enters values.
• Vleġeġ 'il fuq/'l isfel: Innaviga l-menus u aġġusta l-valuri.
• Buttuna tal-Qawwa: Turns the meter on or off.
• Input tas-Sensor: Port for connecting the EC sensor.

5. Setup

5.1. Installazzjoni tal-batterija

1. Sib l-għatu tal-kompartiment tal-batterija fuq wara tal-miter.
2. Use a coin or screwdriver to open the cover.
3. Daħħal żewġ (2) batteriji AA, waqt li tiżgura l-polarità korretta (+/-).
4. Agħlaq l-għatu tal-kompartiment tal-batterija sew biex iżżomm is-siġill li ma jgħaddix ilma minnu.

The meter is designed for over 500 hours of continuous operation on a fresh set of batteries.

5.2. Konnessjoni tas-Sensor

1. Align the connector of the EC sensor (9383-10D) with the sensor input port on the top right side of the meter.
2. Gently push and twist the connector clockwise until it is securely fastened. Do not overtighten.
3. Ensure the sensor is clean and free from air bubbles before use.

6. Istruzzjonijiet Operattivi

6.1. Power On/Off

Agħfas il- Qawwa button (bottom right) to turn the meter on or off.

6.2. Kalibrazzjoni

Regular calibration ensures accurate measurements. The EC220-K supports automatic and manual calibration for EC, TDS, and Salinity.

1. Agħfas il- CAL buttuna biex tidħol fil-modalità tal-kalibrazzjoni.
2. Follow the on-screen prompts to select the appropriate calibration standard solution.
3. Immerse the sensor in the standard solution. The meter will detect the solution and perform automatic calibration.
4. For manual calibration or adjustment of reference temperature, temperature coefficient, or cell constant, use the SET button and arrow keys.
5. Confirm calibration with the ENT buttuna.

6.3. Kejl

After calibration, the meter is ready for measurement.

1. Agħfas il- MEAS button to enter measurement mode.
2. Agħfas il- MODALITÀ button to cycle through measurement parameters: Conductivity (EC), Total Dissolved Solids (TDS), Salinity (SAL), and Resistivity (RES). Temperature is displayed concurrently.
3. Għaddas is-sensor fis-sample solution. Ensure the sensor tip is fully submerged and free of air bubbles.
4. Wait for the reading to stabilize. The 'Auto Stable' feature will indicate when the reading is stable.
5. The meter can display temperature in both Celsius (°C) and Fahrenheit (°F), adjustable in the settings.

6.4. Data Logging and Memory

The LAQUA EC220-K can store up to 500 data points.

• Biex issalva kejl, agħfas il-buttuna ENT button when a stable reading is displayed.
• Biex terġa 'view dejta maħżuna, agħfas il-buttuna DEJTA button. Use the arrow keys to navigate through the records.
• The 'Auto Log Data' feature can be enabled in the settings for automatic data recording at set intervals.

6.5. Settings

Access advanced settings by pressing the SET button. Here you can adjust:

• Temperatura ta 'Referenza
• Koeffiċjent tat-Temperatura
• Kostanti taċ-Ċellula
• Measurement Units (e.g., µS/cm, mS/cm, ppm, ppt, °C, °F)
• TDS Conversion Factor (four curves available)
• Salinity Calibration Curves (two curves available)
• It-tul tad-dawl ta' wara
• Auto Power Off settings

7. Manutenzjoni

7.1. Meter Cleaning

Wipe the meter body with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the battery compartment is sealed before cleaning.

7.2. Sensor Care and Cleaning

• Rinse the sensor thoroughly with distilled or deionized water after each use.
• If the sensor is visibly dirty or readings become erratic, clean it according to the sensor-specific instructions provided with the electrode.
• Store the sensor in its protective cap with appropriate storage solution, if specified, to prevent drying out.

7.3. Ħażna

When not in use for extended periods, remove the batteries from the meter. Store the meter and sensor in the provided carrying case in a cool, dry place.

8 Issolvi l-problemi

9. Speċifikazzjonijiet

10. Garanzija u Appoġġ

The HORIBA LAQUA EC220-K meter comes with a garanzija ta 'sena from the date of purchase, covering manufacturing defects. The sensor may have a separate warranty period; please refer to the sensor's specific documentation.

For technical support, service, or warranty claims, please contact HORIBA customer service or visit the official HORIBA Store on Amazon jew l-uffiċjal tagħhom websit għal informazzjoni ta' kuntatt.