Cadmos YF2024 Digital RGB Alarm Clock User Manual

Introduzzjoni

Thank you for choosing the Cadmos YF2024 Digital RGB Alarm Clock. This manual provides detailed instructions for setting up, operating, and maintaining your new alarm clock. Please read this manual thoroughly before use to ensure proper function and to maximize your user experience.

The Cadmos YF2024 features a large RGB colorful display, dual alarms, adjustable volume, and a battery backup system, making it suitable for various users including heavy sleepers, adults, kids, and teens.

Informazzjoni dwar is-Sigurtà

• Ensure the clock is powered by a DC 5V power supply using the provided USB adapter.
• Tesponix l-apparat għall-ilma jew għal umdità eċċessiva.
• Żomm l-apparat 'il bogħod mix-xemx diretta u sorsi tas-sħana.
• Use only the specified AAA batteries for backup. Do not mix old and new batteries or different types of batteries.
• Do not attempt to disassemble or repair the device yourself. Contact customer support if service is required.

Kontenut tal-Pakkett

• Cadmos YF2024 Digital RGB Alarm Clock
• USB Power Cable (Type-C, 59 inches)
• Adapter tal-Enerġija USB
• Manwal għall-Utent (dan id-dokument)

Prodott Overview

The Cadmos YF2024 alarm clock features a compact design with a clear digital display and intuitive controls.

Deskrizzjoni tal-Immaġni: Quddiem view of the Cadmos YF2024 Digital RGB Alarm Clock displaying the time 10:48 AM with multi-colored digits. Alarm indicators 1 and 2 are visible. Buttons for 'Alarm ON/OFF' and 'SNZ/MULTICOLOR' are on top.

Deskrizzjoni tal-Immaġni: Top image shows the product dimensions: 5.1 inches (length), 1.0 inch (width), 2.1 inches (height), with digit height of 1.7 inches. The bottom image shows the rear of the clock with controls for 'DisPlay Dimmer' (brightness adjustment), 'Time Set' (hold press), and the 5V DC power input. A note indicates the clock requires DC 5V power and batteries are for saving settings only.

Kontrolli u Portijiet:

• Alarm ON/OFF (Short Press): Activates or deactivates the alarm.
• SNZ/MULTICOLOR (Short Press): Activates snooze during an alarm; changes display color in normal mode.
• Set Alarm Time (Hold Press): Jidħol fil-modalità tas-setting tal-allarm.
• DisPlay Dimmer (+/- buttons): Jaġġusta l-luminożità tal-wiri.
• Time Set (Hold Press): Jidħol fil-modalità tal-issettjar tal-ħin.
• Input ta' Enerġija DC 5V: Jikkonnettja mal-adapter tal-enerġija USB.
• Kompartiment tal-batterija: Holds 4 AAA batteries for backup (not included).

Setup

1. Konnessjoni tal-Enerġija

1. Connect the Type-C end of the USB power cable to the DC 5V input port on the back of the alarm clock.
2. Plug the USB-A end of the power cable into the provided USB power adapter.
3. Insert the USB power adapter into a standard electrical outlet. The clock display will illuminate.

Deskrizzjoni tal-Immaġni: Top section illustrates the clock being powered by an outlet via a USB adapter. The bottom section shows the battery compartment for 4 AAA batteries (not included) and demonstrates that the time is preserved during a power outage when batteries are installed.

2. Installazzjoni ta 'Backup tal-Batterija

The battery backup feature ensures that time and alarm settings are retained during a power outage. The clock will not display time using only battery power; it requires the main power supply for display functionality.

1. Iftaħ l-għatu tal-kompartiment tal-batterija fuq wara tal-arloġġ.
2. Insert 4 new AAA batteries (not included) according to the polarity markings (+/-) inside the compartment.
3. Agħlaq l-għatu tal-kompartiment tal-batterija sew.

Istruzzjonijiet Operattivi

1. Issettjar tal-Ħin

1. Press and hold the 'Time Set' button on the back of the clock until the hour digits begin to flash.
2. Use the '+' or '-' buttons (DisPlay Dimmer) to adjust the hour.
3. Press the 'Time Set' button again to confirm the hour and move to minute setting. The minute digits will flash.
4. Use the '+' or '-' buttons to adjust the minutes.
5. Press the 'Time Set' button once more to confirm the minutes and exit time setting mode.

2. Issettjar tal-Allarmi (Allarm 1 u Allarm 2)

L-arloġġ jappoġġja żewġ allarmi indipendenti.

1. Press and hold the 'Set Alarm Time' button on the top of the clock. The alarm 1 indicator (1) will flash, and the hour digits will begin to flash.
2. Use the '+' or '-' buttons to adjust the alarm 1 hour.
3. Press 'Set Alarm Time' again to confirm the hour and move to minute setting. The minute digits will flash.
4. Use the '+' or '-' buttons to adjust the alarm 1 minutes.
5. Press 'Set Alarm Time' again to confirm alarm 1 minutes and proceed to alarm 2 setting. The alarm 2 indicator (2) will flash, and the hour digits will flash.
6. Irrepeti l-passi 2-4 biex issettja l-allarm 2.
7. Press 'Set Alarm Time' one last time to confirm alarm 2 and exit alarm setting mode.

3. Activating/Deactivating Alarms

After setting an alarm, it needs to be activated.

• Short press the 'Alarm ON/OFF' button on the top of the clock to cycle through: Alarm 1 ON, Alarm 2 ON, Alarm 1 & 2 ON, All Alarms OFF.
• The corresponding alarm indicator (1 or 2) on the display will light up when an alarm is active.

4. Aġġustament tal-Volum tal-Allarm

The alarm volume can be adjusted to 5 levels, up to 95dB.

Deskrizzjoni tal-Immaġni: Illustration showing the alarm clock emitting sound, with volume levels ranging from 50dB to 95dB. A graphic indicates 5 adjustable volume levels, with minimum at 50.5 dBA and maximum at 95.3 dBA.

• While an alarm is sounding, press the '+' or '-' buttons (DisPlay Dimmer) to adjust the volume level.
• Alternatively, some models allow volume adjustment during alarm setting mode. Refer to the on-screen prompts if available.

5. Funzjoni Snooze

• When an alarm sounds, short press the 'SNZ/MULTICOLOR' button on the top of the clock to activate snooze. The alarm will pause for 9 minutes and then sound again.
• To turn off the alarm completely, press the 'Alarm ON/OFF' button.

6. Aġġustament tal-luminożità tal-wiri

The clock features 4 brightness levels.

• In normal time display mode, use the '+' or '-' buttons (DisPlay Dimmer) on the back of the clock to cycle through the brightness levels.

7. RGB Color Settings

The clock offers 15 different RGB colors and color changing modes.

Deskrizzjoni tal-Immaġni: A collage showing various color display options for the clock, including White, Blue, Green, Ice-blue, Purple, Red, Rainbow Color Changing, RGB Changing (multiple variations). It highlights 15 different color modes.

• In normal time display mode, short press the 'SNZ/MULTICOLOR' button on the top of the clock to cycle through the available 15 color options and dynamic color changing modes.

8. Format 12/24 Hour

The clock supports both 12-hour (with AM/PM indicator) and 24-hour time formats.

• During time setting mode (when hour digits are flashing), press the 'SNZ/MULTICOLOR' button to toggle between 12-hour and 24-hour formats.

Manutenzjoni

• To clean the clock, gently wipe the surface with a soft, dry cloth.
• Tużax prodotti tat-tindif li joborxu, solventi, jew sprejs kimiċi, għax dawn jistgħu jagħmlu ħsara lill-finitura jew lill-komponenti interni.
• Ensure the clock is unplugged from the power source before cleaning.

Issolvi l-problemi

Speċifikazzjonijiet

Garanzija u Appoġġ

Għal informazzjoni dwar il-garanzija jew appoġġ tekniku, jekk jogħġbok irreferi għall-imballaġġ tal-prodott jew ikkuntattja lill-bejjiegħ tiegħek. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.