Manwal tal-Utent tal-Kaxxa tal-Kompjuter AZZA CSAZ-370 Forest ATX Mid-Tower

Introduzzjoni

Thank you for choosing the AZZA CSAZ-370 Forest ATX Mid-Tower Computer Case. This manual provides detailed instructions for setting up, operating, and maintaining your new computer case. Designed for optimal performance and aesthetics, the CSAZ-370 offers excellent airflow, versatile cooling options, and flexible storage solutions for your gaming and computing needs. Please read this manual thoroughly before installation to ensure proper usage and longevity of your product.

Informazzjoni dwar is-Sigurtà

• Always disconnect the power supply from the wall outlet before performing any installation, maintenance, or cleaning.
• Handle the tempered glass panel with care. It is fragile and can break if dropped or subjected to impact.
• Keep the case away from water, moisture, and extreme temperatures.
• Żgura ertjar xieraq biex tevita perikli elettriċi.
• Tippruvax timmodifika l-kaxxa jew il-komponenti tagħha. Modifiki mhux awtorizzati jistgħu jannullaw il-garanzija tiegħek u joħolqu riskji għas-sigurtà.
• Keep small parts and screws out of reach of children.

Kontenut tal-Pakkett

Jekk jogħġbok ivverifika li l-komponenti kollha huma preżenti fil-pakkett tiegħek:

• AZZA CSAZ-370 Mid-Tower Computer Case
• Accessory Box (screws, cable ties, etc.)
• Manwal għall-Utent (dan id-dokument)

Note: Specific accessories may vary slightly.

Setup u Installazzjoni

1. Case Overview u Dimensjonijiet

The AZZA CSAZ-370 is an ATX Mid-Tower case designed for a balance of performance and compact size. Its dimensions are optimized for various component installations.

In-naħa ta' quddiem view of the AZZA CSAZ-370 computer case, showcasing the mesh front panel with three pre-installed RGB fans and the tempered glass side panel.

Quddiem dirett view of the AZZA CSAZ-370 case, highlighting the full mesh front panel and the three vibrant RGB fans.

Diagram illustrating the massive cooling potential of the AZZA CSAZ-370, showing support for up to 280mm or 360mm radiators in the front and top positions.

Diagram detailing the ultimate thermal performance of the AZZA CSAZ-370, indicating support for up to 8 fans in various positions (front, top, rear, and above PSU shroud).

Diagram showing the internal layout of the AZZA CSAZ-370, highlighting motherboard support (ATX, Micro ATX, ITX), maximum CPU cooler height (160mm), and maximum GPU length (330mm) for excellent gaming performance.

2. Kompatibilità tal-Motherboard

The CSAZ-370 supports ATX, Micro ATX, and Mini ITX motherboards. Ensure your motherboard's form factor is compatible before installation.

3. Appoġġ għall-Fann u r-Radjatur

The case is designed for optimal airflow and cooling performance:

• Quddiem: Supports 3 x 120mm or 2 x 140mm fans. Pre-installed with 3 x 120mm ARGB fans.
• Fuq: Supports 2 x 120mm or 2 x 140mm fans.
• Wara: Supports 1 x 120mm fan.
• Fuq il-Qoxra tal-PSU: Supports 2 x 120mm fans for direct GPU airflow.
• Appoġġ għar-radjatur: Up to 360mm in the front, and up to 280mm in the top.

4. Għażliet ta 'Ħażna

The CSAZ-370 offers flexible storage configurations:

Diagram illustrating the flexible storage options within the AZZA CSAZ-370 case, showing locations for 3.5" HDDs and 2.5" SSDs.

• Multifunctional hard disk bracket supports 3.5" HDD x 1 or 2.5" SSD x 1 (Location A).
• Multifunctional hard disk cage supports 3.5" HDD x 1 or 2.5" SSD x 1 (Location B).
• 2.5" SSD metal tray supports 2.5" SSD x 2 (Location C).

5. Intuitive I/O Panel

The top panel provides convenient access to essential ports and controls:

Close-up view of the top I/O panel of the AZZA CSAZ-370 case, showing the Combo HD Audio jack, two USB 3.0 ports, LED button, and Power button.

• Buttuna tal-Qawwa
• LED Button (for RGB control)
• 2 x Portijiet USB 3.0
• Combo HD Audio Jack

Istruzzjonijiet Operattivi

1. Tixgħil / Mitfi

Press the Power button located on the top I/O panel to turn your system on or off. A short press typically powers on, while a long press (usually 4-5 seconds) initiates a forced shutdown.

2. Kontroll tal-Fann RGB

Il-fannijiet ARGB installati minn qabel jistgħu jiġu kkontrollati b'żewġ modi:

• Buttuna LED: Press the LED button on the top I/O panel to cycle through different lighting modes and effects.
• Motherboard Software Synchronization: If your motherboard supports Addressable RGB (ARGB) synchronization, connect the case's ARGB cable to the appropriate header on your motherboard. This allows you to control the fan lighting directly through your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync).

Manutenzjoni

1. Tindif

• Barra: Uża artab, damp cloth to wipe down the exterior surfaces. Avoid abrasive cleaners or solvents.
• Filtri tat-Trab: Regularly clean the removable dust filters (if applicable) to maintain optimal airflow. Gently remove them and clean with a soft brush or rinse with water (ensure they are completely dry before reinstallation).
• Intern: Use compressed air to remove dust buildup from internal components and fans. Ensure the system is powered off and unplugged before cleaning the interior.

2. Kura Ġenerali

• Avoid placing heavy objects on top of the case.
• Ensure adequate ventilation around the case to prevent overheating.
• Iċċekkja perjodikament il-konnessjonijiet tal-kejbil kollha biex tiżgura li huma sikuri.

Issolvi l-problemi

Speċifikazzjonijiet

Garanzija u Appoġġ

Għal informazzjoni dwar il-garanzija u appoġġ tekniku, jekk jogħġbok irreferi għall-AZZA uffiċjali webis-sit jew ikkuntattja lis-servizz tal-konsumatur ta' AZZA direttament. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.

Uffiċjali tal-AZZA Websit: www.azza.com

For further assistance, please contact your local retailer or distributor.