STINGER CTSGM-49

Connects2 CTSGM-49 Radio Replacement Module User Manual

Model: CTSGM-49 | Brand: STINGER

Introduzzjoni

The Connects2 CTSGM-49 Radio Replacement Module is designed to facilitate the installation of an aftermarket car stereo in select GM vehicles manufactured between 2004 and 2016. This module ensures the retention of critical factory functions, including steering wheel controls and various vehicle chimes, while preventing fault codes in the vehicle's Electronic Control Module (ECM).

Karatteristiċi tal-Prodott

  • Radio Replacement Simplification: Streamlines the integration of an aftermarket head unit into your vehicle's existing electrical system.
  • Żamma tal-Kontroll tal-Istering Wheel (SWC): Maintains the functionality of your factory steering wheel buttons for audio control (volume, track, etc.).
  • Factory Chime Retention: Preserves all original vehicle chimes, including safety and warning alerts (e.g., low fuel, seatbelt, park assist).
  • ECM Fault Code Prevention: Sends correct data to the vehicle's ECM to prevent fault codes that can occur when the factory radio is removed, ensuring proper vehicle diagnostics.
  • Accessory Power Output: Provides a +12V switched accessory power source (rated at 0.3A) for the aftermarket radio. Note: This output is not intended to power the head unit directly.

Kontenut tal-Pakkett

Connects2 CTSGM-49 Radio Replacement Module with wiring harnesses and chime speaker

The Connects2 CTSGM-49 package includes the following components:

  • Connects2 CTSGM-49 Radio Replacement Module
  • Ċineg tal-Wajers Speċifiċi għall-Vettura
  • Chime Speaker (for factory chime retention)

Image shows the main module, various wiring harnesses for vehicle integration, and a small speaker for retaining factory chimes.

Kompatibbiltà tal-Vettura

This module is compatible with a range of GM vehicles. Please refer to the table below to confirm your vehicle's compatibility and supported steering wheel control functions. Note that some vehicles may not be compatible if fitted with factory navigation for specific model years.

Vehicle Compatibility Table for Connects2 CTSGM-49 module

The table details compatible Buick, Chevrolet, GMC, Hummer, Pontiac, Saturn, and Suzuki models, their respective years, harness type (A, B, C), and whether Steering Wheel Control (SWC) functions are supported (Y/N). Specific notes regarding factory navigation compatibility are also included.

Key Compatibility Notes:

  • Buick: Enclave (2008-2012), Lucerne (2006-2010)
  • Chevrolet: Avalanche (2007-2013), Cobalt (2005-2010), Equinox (2007-2009), Express Van (2008-2016), HHR (2006-2011), Impala/Impala SS (2006-2013), Malibu (2004-2012), Monte Carlo (2006-2007), Silverado 1500-3500 (2007-2013), Suburban (2007-2014), Tahoe (2007-2014), Traverse (2009-2012). Note: Suburban/Tahoe/Sierra/Yukon models from 2012-2013 are not compatible if fitted with factory navigation.
  • GMC: Acadia (2007-2012), Savana (2008-2016), Sierra 1500-3500 (2007-2013), Yukon (2007-2014), Yukon XL (2007-2014).
  • Hummer: H2 (2008-2009)
  • Pontiac: G5 (2007-2009), G6 (2005-2009), Solstice (2007-2009), Torrent (2007-2009)
  • Saturnu: Aura (2007-2009), Outlook (2008-2009), Sky (2007-2009)
  • Suzuki: XL7 (2007-2010)

Gwida għall-Installazzjoni

Installation of the CTSGM-49 module requires basic automotive electrical knowledge. It is recommended to consult a professional installer if you are unsure about any steps. Always disconnect the vehicle's battery before beginning installation.

Passi Ġenerali ta' Installazzjoni:

  1. Ipprepara Vettura: Ensure the vehicle's ignition is off and disconnect the negative terminal of the battery.
  2. Neħħi r-Radju tal-Fabbrika: Carefully remove the existing factory radio from the dashboard.
  3. Qabbad il-Wajers tal-Arnessi: Connect the vehicle-specific wiring harnesses from the CTSGM-49 module to the vehicle's factory wiring. Ensure all connections are secure.
  4. Connect Aftermarket Radio: Connect the other end of the CTSGM-49 harnesses to your aftermarket car stereo's wiring. Pay close attention to power, ground, speaker, and accessory wire connections.
  5. Integrate Chime Speaker: Connect the provided chime speaker to the designated output on the CTSGM-49 module. Position the speaker in a location where chimes can be clearly heard but are not obstructed.
  6. Tqegħid tal-Modulu: Securely mount the CTSGM-49 module in a safe, dry location behind the dashboard, away from moving parts or heat sources.
  7. Sistema tat-Test: Reconnect the vehicle's battery. Turn on the ignition and test the aftermarket radio's functionality, including audio, steering wheel controls, and factory chimes. Verify that no new warning lights appear on the dashboard.
  8. Erġa' għaqqad id-Dashboard: Ladarba l-funzjonijiet kollha jkunu kkonfermati, erġa' arma l-komponenti tad-dashboard bir-reqqa.

For detailed wiring diagrams and specific vehicle instructions, please refer to the comprehensive installation manual provided with your product or consult the manufacturer's websit.

Operazzjoni

Once installed, the Connects2 CTSGM-49 module operates automatically to maintain factory functions. There are no user-adjustable settings on the module itself.

Kontrolli tal-istering:

Your factory steering wheel controls will function as they did with the original radio, allowing you to control basic functions of your aftermarket head unit such as:

  • Volum 'il fuq/'l isfel
  • Track Up/Down (Next/Previous)
  • Għażla tal-Modalità/Sors
  • Call Answer/End (if supported by your aftermarket radio and vehicle)

The specific functions retained may vary slightly depending on your vehicle's original configuration and the capabilities of your aftermarket radio.

Factory Chimes:

All factory chimes (e.g., seatbelt warning, door ajar, low fuel, park assist) will continue to sound through the dedicated chime speaker provided with the module. The volume of these chimes is typically controlled by the vehicle's factory settings or is fixed.

Issolvi l-problemi

If you encounter issues after installing the CTSGM-49 module, consider the following common troubleshooting steps:

ProblemaKawża PossibbliSoluzzjoni
No power to aftermarket radio.Incorrect wiring, blown fuse, or module not receiving power.Check all wiring connections, especially power and ground. Verify vehicle fuses. Ensure the module is properly connected to the vehicle's power source. Remember the module's accessory power output is 0.3A and not for powering the head unit directly.
Il-kontrolli tal-istering mhux qed jaħdmu.Incorrect SWC wiring, incompatible aftermarket radio, or vehicle not supported for SWC retention.Verify the SWC wires are correctly connected between the module and the aftermarket radio. Check your aftermarket radio's manual for SWC input configuration. Confirm your vehicle model and year are listed as supporting SWC in the compatibility table.
No factory chimes or chimes are too quiet/loud.Chime speaker not connected, faulty speaker, or incorrect module connection.Ensure the chime speaker is securely connected to the module. Check the speaker for damage. Verify all module connections are firm. Chime volume is typically fixed by the vehicle's system.
Check Engine Light or other warning lights appear.Module not communicating correctly with vehicle's ECM.Double-check all module connections. Ensure the module is receiving proper power and data signals. If issues persist, consult a professional installer or vehicle technician.

If troubleshooting steps do not resolve the issue, please contact STINGER customer support for further assistance.

Speċifikazzjonijiet

  • Numru tal-Mudell: CTSGM-49
  • Ditta: stinger
  • Materjal: Acrylonitrile Butadiene Styrene
  • Piż tal-oġġett: 5.6 uqija
  • Dimensjonijiet tal-pakkett: 9 x 4.5 x 1.75 pulzieri
  • Tip ta' Konnettur: Rectangular Or Circular Connector
  • Accessory Power Output: +12V, 0.3A (max)
  • Kompatibilità: Select GM Buick/GMC/Hummer/Pontiac/Saturn/Suzuki Vehicles (2004-2016) with GM LAN 29 Bit system.

Garanzija u Appoġġ

STINGER products are designed for reliability and performance. For information regarding warranty coverage, technical support, or replacement parts, please visit the official STINGER websit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom.

Manifattur: stinger

Data L-Ewwel Disponibbli: 6 ta’ Settembru, 2024

Għall-aktar riżorsi ta' appoġġ aġġornati, jekk jogħġbok żur il- STINGER Store on Amazon jew l-uffiċjal tagħhom websit.

Dokumenti Relatati - CTSGM-49

Preview Gwida għall-Installazzjoni tal-Kit ta' Sostituzzjoni tar-Radju Stinger SRX-GM14128 HORIZON12 għal Silverado/Sierra
Gwida komprensiva għall-installazzjoni tal-kit Stinger SRX-GM14128, li tippermetti l-installazzjoni tas-sistema ta' infotainment multimedjali HORIZON12 ta' 12.8 pulzieri fit-trakkijiet Chevrolet Silverado u GMC Sierra tal-2014-2019 filwaqt li żżomm il-karatteristiċi tal-fabbrika.
Preview Gwida għall-Installazzjoni ta' Stinger HEIGH10 UN1810E-FD5 għal Ford Transit Custom
Din il-gwida għall-installazzjoni tipprovdi struzzjonijiet dettaljati dwar kif titwaħħal is-soluzzjoni tat-touch screen tal-infotainment Stinger HEIGH10 ta' 10 pulzieri f'Ford Transit Custom (mill-2018 'il quddiem). Tkopri t-tneħħija tal-istereo, l-assemblaġġ tal-unità, is-setup tal-pjanċa tal-fascia, iċ-ċavetta tal-wajers, il-funzjonalità tal-kontroll tal-istering, il-passi tal-konnessjoni, u l-assistenza teknika.
Preview Gwida għall-Installazzjoni tal-Kit ta' Sostituzzjoni tar-Radju Stinger SR-GM14HX HORIZON10 għal Chevrolet Silverado u GMC Sierra (2014-2019)
Detailed installation guide for the Stinger SR-GM14HX Radio Replacement Kit, enabling the installation of the HORIZON10 modular radio in select 2014-2019 Chevrolet Silverado and GMC Sierra trucks. Covers features, components, tools, disassembly, wiring, and final installation.
Preview Gwida għall-Utent ta' Stinger HORIZON10 SRK-GM14HX - Installazzjoni u Tħaddim
Gwida komprensiva għall-utent għas-sistema ta' infotainment Stinger HORIZON10 SRK-GM14HX, li tkopri l-installazzjoni, il-karatteristiċi, is-settings, u s-soluzzjoni tal-problemi għat-trakkijiet Chevrolet Silverado u GMC Sierra.
Preview Gwida għall-Installazzjoni ta' Stinger HEIGH10 għal Ford Ranger 2016+
Gwida komprensiva għall-installazzjoni għas-soluzzjoni tat-touch screen tal-infotainment integrat Stinger HEIGH10 għall-mudelli Ford Ranger 2016+. Tinkludi t-tneħħija tal-istereo, is-setup tal-pjanċa tal-fascia, u l-konfigurazzjoni tal-interfaċċja.
Preview Kit ta' Installazzjoni Stinger SRK-JK11HX HORIZON10 għal Jeep Wrangler JK (2011-2018) - Gwida għall-Installazzjoni
Gwida komprensiva għall-installazzjoni tal-kit ta' integrazzjoni Stinger SRK-JK11HX HORIZON10 għall-mudelli Jeep Wrangler JK tal-2011-2018. Tgħallem kif tinstalla, tikkonnettja l-wajers, u żżomm il-karatteristiċi tal-vettura.