AMBITFUL RGB Light Pen A2 A2PRO Plus Instruction Manual

1. Introduzzjoni

Thank you for choosing the AMBITFUL RGB Light Pen A2 A2PRO Plus. This instruction manual provides essential information for the safe and effective use of your new lighting equipment. Please read this manual thoroughly before operation and retain it for future reference.

2. Prodott Aktarview

2.1 Karatteristiċi ewlenin

• Modi Operattivi Multipli: Features CCT, HSL, RGBWY, and Scene modes, along with 26 special effects to suit various creative lighting requirements.
• Superior Color Performance: Offers 0-360° full color coverage, 0-100% brightness adjustment, and a wide color temperature range of 2500K to 8500K. Equipped with 448 high-quality lamp beads for uniform and high-quality illumination.
• Għażliet ta' Kontroll Flessibbli: Control the light using the on-board panel or conveniently via the dedicated mobile application.
• Soft and Natural Illumination: Features a high-quality soft light tube surface, producing gentle and natural light ideal for various shooting scenarios.
• Iċċarġjar effiċjenti: Supports PD/QC fast charging for quicker and more efficient power replenishment.

2.2 Kontenut tal-Pakkett

Iċċekkja li l-oġġetti kollha elenkati hawn taħt huma inklużi fil-pakkett tiegħek:

• Korp Dawl x2
• Grid x2
• Clip x4
• Cable tal-Iċċarġjar tal-USB x2
• Manwal għall-Utent x1

Figura 2.2.1: Kontenut tal-Pakkett

2.3 Dimensjonijiet u Piż tal-Prodott

The AMBITFUL RGB Light Pen measures approximately 95.92 cm in length and 3.8 cm in diameter, with a weight of about 837g per light body.

Figura 2.3.1: Dimensjonijiet u Piż tal-Prodott

3. Setup

3.1 Iċċarġjar tal-Apparat

Before first use, fully charge the light pen. Connect the provided USB charging cable to the light pen's charging port and a compatible PD/QC fast charger. The integrated 3300mAh battery requires sufficient charging time. A charging indicator will typically show the charging status.

3.2 Għażliet ta 'Immuntar

The light pen features universal 1/4" screw holes at both ends, allowing for versatile mounting on tripods, light stands, or other compatible brackets. The included clips also offer magnetic attachment for quick setup on metallic surfaces.

Figure 3.2.1: Universal 1/4" Screw Hole

3.3 Connecting via App

The AMBITFUL RGB Light Pen can be controlled wirelessly via Bluetooth using the AmbitfulPro mobile application. Download the app from your device's app store. Once installed, open the app, and it should automatically detect and connect to the light pen(s) for convenient control.

Figura 3.3.1: Interfaċċja tal-Kontroll tal-App

4. Istruzzjonijiet Operattivi

4.1 Power On/Off

Locate the power button on the light pen. Press and hold the button for a few seconds to turn the device on or off.

4.2 Għażla tal-Modalità

The light pen offers several operating modes, accessible via the on-board controls or the mobile app:

• Modalità CCT: Allows adjustment of color temperature from 2500K (warm white) to 8500K (cold white).
• Modalità HSL: Provides full control over Hue (0-360°), Saturation (0-100%), and Lightness (Brightness 0-100%).
• RGBWY Mode: Offers individual control over Red, Green, Blue, Warm White, and Cold White channels.
• Modalità Xena: Access 26 pre-programmed special effects for dynamic lighting scenarios.

Figure 4.2.1: Variable Color Temperature (CCT Mode)

Figure 4.2.2: HSI Full Color Mode

Figure 4.2.3: Multiple Special Light Effects (Scene Mode)

4.3 Aġġustament tat-Temperatura tal-Kulur

In CCT mode, use the designated controls (buttons on the device or sliders in the app) to adjust the color temperature between 2500K and 8500K to match ambient lighting or achieve desired creative effects.

4.4 Hue, Saturation, and Brightness Control

In HSL or RGBWY modes, adjust the hue to select the desired color, saturation to control the intensity of the color, and brightness to set the overall light output from 0% to 100%.

4.5 Effetti Speċjali

Navigate to Scene mode to select from 26 pre-programmed special effects such as Lightning, Flash, Candle, and various breathing light effects. Adjust parameters like rhythm and brightness for each effect as needed.

4.6 Using the Fabric Grids

The included fabric grids can be attached to the light pens to provide precise control over the light spread, helping to create softer, more uniform illumination and shape the light for specific ambiances.

Figure 4.6.1: Soft and Uniform Lighting with Grids

5. Manutenzjoni

5.1 Tindif

To clean the light pen, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the surface or internal components. Ensure the device is powered off and disconnected from any power source before cleaning.

5.2 Ħażna

When not in use, store the light pen in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. Use the provided carry case (if applicable) to protect the device from dust and physical damage.

5.3 Kura tal-Batterija

To prolong battery life, avoid fully discharging the device frequently. If the device will not be used for an extended period, charge it to approximately 50-70% before storage. Note that some users have reported unusually long charging times and potential self-discharge issues. If you experience these, ensure you are using a compatible PD/QC charger and contact customer support if problems persist.

6 Issolvi l-problemi

6.1 Kwistjonijiet Komuni

• Apparat mhux qed jixgħel: Kun żgur li l-batterija hija ċċarġjata. Qabbad ma' sors ta' enerġija u erġa' pprova.
• Iċċarġjar bil-mod: While the device supports fast charging, some users have reported extended charging times. Ensure your charger is PD/QC compatible and provides sufficient power. If charging remains excessively slow, the battery may require service.
• Battery Drains Quickly/Self-Discharge: If the battery loses charge rapidly even when not in use, this may indicate a battery issue. Ensure the device is fully powered off when stored.
• Is-sħana żejda: The device may become warm during extended use. If it becomes excessively hot or emits unusual sounds, power it off immediately and allow it to cool down. Prolonged overheating can damage the device.
• Kwistjonijiet ta' Konnettività tal-App: Ensure Bluetooth is enabled on your mobile device and the light pen is within range. Restart both the app and the light pen if connection problems occur.

6.2 Issolvi l-problemi Ġenerali

If you encounter any issues not listed above, try the following steps:

1. Ibda mill-ġdid l-apparat.
2. Iċċekkja l-konnessjonijiet kollha tal-kejbil.
3. Refer to the official AMBITFUL website for updated FAQs or support resources.

7. Speċifikazzjonijiet

8. Garanzija u Appoġġ

For warranty information, please refer to the documentation provided with your purchase or contact AMBITFUL customer support directly. If you require technical assistance or have questions regarding your product, please visit the official AMBITFUL websit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom.