Onforu 4500LM Solar Lights Outdoor (Model BDTYD05) - Instruction Manual

1. Introduzzjoni

Thank you for choosing the Onforu 4500LM Solar Lights Outdoor. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your solar-powered security lights. Please read this manual thoroughly before use and retain it for future reference.

2. Istruzzjonijiet tas-Sigurtà

• Kun żgur li l-pannell solari jirċievi dawl tax-xemx dirett għall-iċċarġjar ottimali.
• Do not disassemble, modify, or attempt to repair the product. This may cause damage and void the warranty.
• Żomm il-prodott 'il bogħod min-nar u minn temperaturi għoljin.
• Dan il-prodott huwa ddisinjat għall-użu fuq barra u huwa reżistenti għall-ilma IP65. Madankollu, evita li tgħaddsu fl-ilma.
• Żomm fejn ma jintlaħaqx mit-tfal.
• Before installation, ensure the mounting surface is stable and can support the weight of the light.

3. Kontenut tal-Pakkett

Kull pakkett fih l-oġġetti li ġejjin:

• Onforu 4500LM Solar Light (x2)
• Kontroll mill-bogħod (x2)
• Bracket tal-Immuntar (x2)
• Screws and Wall Plugs (for installation)
• Manwal għall-Utent (x1)

Figure 3.1: Package contents showing two solar lights.

4. Prodott Aktarview

The Onforu Solar Light features an integrated design with a solar panel, three adjustable LED light heads, and a motion sensor.

• Panel Solari: Converts sunlight into electrical energy to charge the internal battery.
• LED Light Heads: Three adjustable heads providing 4500LM brightness and 270° illumination.
• Sensor tal-Moviment: Detects movement within a 180° angle and up to 40ft distance.
• Buttuna ON/OFF: Located on the back of the unit for initial power activation.

Figure 4.1: Product components and dimensions.

5. Setup u Installazzjoni

Segwi dawn il-passi għal installazzjoni xierqa:

1. Ħlas Inizjali: Before installation, ensure the light is turned ON via the button on the back and expose the solar panel to direct sunlight for at least 6-8 hours to allow for initial battery charging.
2. Agħżel Post: Choose an outdoor location where the solar panel can receive maximum direct sunlight throughout the day. The recommended installation height is 8.2-9.8 feet for optimal motion detection and light coverage.
3. Immuntar tal-Bracket:
   • Position the mounting bracket on the desired surface (wall, fence, pole).
   • Mark the drill points through the holes on the bracket.
   • Drill holes at the marked positions. Insert the wall plugs if installing on masonry or concrete.
   • Waħħal il-bracket tal-immuntar mal-wiċċ billi tuża l-viti pprovduti.
4. Waħħal id-Dawl: Slide the solar light unit onto the secured mounting bracket until it clicks into place.
5. Adjust Light Heads and Solar Panel: Adjust the angle of the three light heads to cover the desired area. Ensure the solar panel is angled to receive optimal sunlight.

Figure 5.1: Installation steps for the solar light.

Figure 5.2: Solar charging during the day for night operation.

6. Istruzzjonijiet Operattivi

The Onforu Solar Light offers three distinct lighting modes, controllable via the included remote.

6.1 Funzjonijiet ta' Kontroll mill-bogħod

• ON/OFF: Ixgħel jew jitfi d-dawl.
• MODE1 (PIR): Motion Sensor Mode. Light turns on at 100% brightness when motion is detected and turns off 20 seconds after motion ceases.
• MODE2 (PIR+DIM): Dim Light Sensor Mode. Light stays on at 3% brightness at night. When motion is detected, it brightens to 100% for 20 seconds, then returns to 3% brightness.
• MODE3 (D2D): Always On Mode. Light turns on automatically at 10% brightness at night and stays on until dawn.
• DIM (+/-): Adjusts brightness levels (30%, 60%, 100%) in Always On Mode (MODE3).

Figure 6.1: Remote control for selecting lighting modes and brightness.

6.2 Lighting Modes Visual Guide

Figure 6.2: Mode 1: Motion Sensor Mode (100% brightness on detection, off after 20s).

Figure 6.3: Mode 2: Dim Light Sensor Mode (3% dim, 100% on detection for 20s).

Figure 6.4: Mode 3: Always On Mode (10% brightness all night).

6.3 Vidjo Uffiċjali tal-Prodott

7. Speċifikazzjonijiet

8. Manutenzjoni

• Tindif: Imsaħ il-pannell solari regolarment b'ċarruta ratba u damp drapp biex tneħħi t-trab, il-ħmieġ, jew il-fdalijiet. Pannell nadif jiżgura ċċarġjar effiċjenti.
• Batterija: The integrated Lithium Ion battery is designed for long-term use. If replacement is ever needed, consult a qualified technician.
• Kundizzjonijiet Ambjentali: While IP65 waterproof, extreme weather conditions (e.g., severe storms, prolonged heavy snow) may reduce performance or lifespan. Consider temporary removal or additional protection in such conditions.

9 Issolvi l-problemi

• Id-dawl ma jixgħelx bil-lejl:
  • Ensure the ON/OFF button on the back of the unit is pressed to the "ON" position.
  • Verify the solar panel is receiving sufficient direct sunlight during the day (6-8 hours recommended). Obstructions like trees or buildings can reduce charging efficiency.
  • Check if the light is installed in an area with strong ambient light (e.g., streetlights), which might prevent it from activating.
• Motion sensor is not working or is too sensitive/insensitive:
  • Kun żgur li s-sensorju tal-moviment mhux ostakolat.
  • Adjust the angle of the motion sensor to optimize detection range and sensitivity.
  • Confirm the light is in MODE1 or MODE2 via the remote control.
• Il-kontroll remot mhux qed jaħdem:
  • Ensure there are no obstructions between the remote and the light.
  • Check the remote control battery (CR2025) and replace if necessary.

10. Garanzija u Appoġġ

Onforu products are designed for quality and reliability. For warranty information, technical support, or any questions regarding your product, please refer to the contact information provided on the product packaging or visit the official Onforu websit.