Introduzzjoni
This manual provides comprehensive instructions for the safe and effective use of your Nitecore MH40 PRO Ultra Bright Long Range Hunting Flashlight. Please read this manual thoroughly before operation to ensure optimal performance and longevity of your device.
Figure 1: Nitecore MH40 PRO Flashlight with included accessories. This image shows the flashlight, the NBP100R battery, USB-C charging cable, remote switch, and holster.
Prodott Overview u Karatteristiċi
The Nitecore MH40 PRO is a high-performance flashlight designed for long-range illumination, featuring a UHi 40 MAX LED and advanced optical system. It is suitable for various activities including search, patrolling, caving, and search and rescue operations.
- Output Max: 3,500 Lumens
- Distanza massima tar-raġġ: 1,300 Meters
- Max Beam Intensity: 423,000 cd
- Max Runtime: 62 sigħat
- LED: NiteLab UHi 40 MAX LED
- Equipped with a NITECORE NBP100R rechargeable Li-ion battery pack (10,000mAh).
- Features a USB-C charging port.
- Includes a wireless remote switch for versatile control.
- IP68 rated for waterproof and dustproof performance.
Figure 2: The MH40 PRO flashlight shown with its wireless remote switch, highlighting its long-range capability.
Figure 3: Visual representation of key upgrades including UHi LED, 3,500 lumens output, 10,000mAh Li-ion battery pack, wireless remote switch, and low power vibration indication.
Setup
1. Installazzjoni u Iċċarġjar tal-batterija
The MH40 PRO comes with a NITECORE NBP100R rechargeable Li-ion battery pack. This battery pack fits snugly inside the flashlight and can also serve as an emergency power supply.
- Ħoll l-għatu tad-denb tal-flashlight.
- Insert the NBP100R battery pack with the positive (+) terminal facing towards the head of the flashlight.
- Invita l-għatu tad-denb lura sew.
- To charge, connect the USB-C charging cable to the port on the battery pack (accessible when removed from the flashlight) or directly to the flashlight's charging port if available (information suggests battery pack has the port). Connect the other end to a USB power source.
- The power indicator beneath the mode button will flash to show charging status.
The MH40 PRO can also be powered by two 21700 batteries (not included) as an alternative power supply.
Figure 4: The NBP100R 10,000mAh Li-ion battery pack, which provides extended runtime and features a USB-C charging port.
2. Wireless Remote Switch Setup
The included wireless remote switch provides convenient control of the flashlight. It can be attached using various methods:
- Hook-and-Loop Fastener: Stick the wireless remote switch on any desired surface.
- Picatinny Rail Mounts (Optional): The remote switch can be easily mounted on a Picatinny rail for tactical use.
- Hook-and-Loop Straps: Fasten the wireless remote switch flexibly to various objects.
Figure 5: Demonstrates the various ways to attach the wireless remote switch, including hook-and-loop fastener, Picatinny rail mounts, and hook-and-loop straps.
Istruzzjonijiet Operattivi
1. Operazzjoni Bażika
- Tixgħel/Jitfi: Use the tail switch. A light press provides momentary-on, while a full press provides constant-on.
- Livelli ta' luminożità: While the flashlight is on, short press the mode button to cycle through brightness levels (Low, Mid, High, Turbo).
- Memorja tal-Modalità: The flashlight features an intelligent mode memory function, automatically accessing the previously memorized brightness level or STROBE Mode (SOS and BEACON excluded) when reactivated.
2. Modi Speċjali
- Modalità STROBE: This mode uses randomly changing frequencies for stronger dizzying effects. Refer to the product specifications for activation.
- Modalità SOS: Għal sinjalar ta' emerġenza.
- BEACON Mode: For location signaling.
3. Indikazzjoni tal-Enerġija
- A power indicator beneath the mode button flashes to show the remaining battery power.
- The flashlight vibrates every 10 seconds when the battery falls below 10%, reminding users to recharge timely.
4. Regolazzjoni Avvanzata tat-Temperatura (ATR)
The MH40 PRO incorporates an Advanced Temperature Regulation (ATR) module. This module adjusts the output performance according to the internal temperature of the flashlight, ensuring optimal performance and preventing overheating.
Figure 6: Illustration of the highly efficient constant current circuit (non-PWM) which provides a stable and comfortable visual experience without flashing.
Manutenzjoni
1. Tindif
- Regularly clean the threads and O-rings with a clean cloth.
- Apply a thin layer of silicone grease to the O-rings periodically to maintain waterproof integrity.
- Naddaf il-lenti b'ċarruta ratba u nadifa. Evita materjali li joborxu.
2. Ħażna
- When storing the flashlight for an extended period, remove the battery to prevent leakage.
- Aħżen f'post frisk u niexef 'il bogħod mix-xemx diretta u temperaturi estremi.
3. Reżistenza għall-Ilma u t-Trab
The MH40 PRO is IP68 rated, meaning it is waterproof and dustproof. It can be submerged in water up to 2 meters.
- Ensure all caps and covers are securely tightened before exposing the flashlight to water or dusty environments.
- After exposure to saltwater, rinse the flashlight with fresh water and wipe it dry.
Figure 7: The MH40 PRO flashlight submerged in water, illustrating its IP68 waterproof rating, capable of submersion up to 2 meters.
Issolvi l-problemi
If you encounter issues with your Nitecore MH40 PRO, please refer to the following common troubleshooting steps:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-flashlight ma tixgħel. | Low battery, improperly installed battery, loose tail cap. | Charge the battery. Ensure the battery is inserted correctly with positive (+) terminal towards the head. Tighten the tail cap securely. |
| Il-ħruġ tad-dawl huwa baxx jew jitteptep. | Low battery, dirty contacts, loose components. | Recharge the battery. Clean battery contacts and flashlight terminals. Ensure all parts are securely tightened. |
| Il-flashlight tisħon malajr. | Operating in Turbo mode for extended periods, high ambient temperature. | The ATR module will automatically reduce output to prevent overheating. Switch to a lower brightness level if necessary. Ensure proper ventilation. |
| Remote switch not responding. | Battery in remote switch low (if applicable), out of range, interference. | Check remote switch battery. Ensure remote switch is within effective range of the flashlight. Try moving away from sources of interference. |
If the problem persists after trying these steps, please contact Nitecore customer support.
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Output Max | 3,500 Lumens |
| Distanza Massima tar-Raġġ | 1,300 Meters |
| Intensità Massima tar-Raġġ | 423,000 cd |
| Max Runtime | 62 h 0 m / 2.58 d |
| LED | NiteLab UHi 40 MAX LED |
| Riflettur | SMO |
| Batterija | 1 x NBP100R (10,000mAh) or 2 x 21700 |
| Modi Speċjali | Location Beacon, SOS, STROBE |
| Kulur tar-Raġġ | Dawl abjad |
| Tul | 256 mm / 10.08 pulzieri |
| Daqs tar-ras | 65 mm / 2.56 pulzieri |
| Piż | 270 g / 9.52 oz |
| Klassifikazzjoni li ma jgħaddix ilma minnha | IP68 (2 metri sommerġibbli) |
| Reżistenza għall-Impatt | 1 metru |
| Materjal | Aero-grade aluminum alloy, HA III military-grade hard-anodized finish |
Technical Data (Runtime and Intensity)
The following tables detail the runtime and intensity specifications based on battery type:
Figure 8: Detailed technical data table showing brightness levels, runtime, beam distance, and peak beam intensity for both NBP100R Li-ion Battery Pack and 2 x 21700 Li-ion Batteries.
Kontenut tal-Pakkett
The Nitecore MH40 PRO package includes the following items:
- MH40 Pro Flashlight
- Swiċċ mill-bogħod bla fili
- Hook-and-Loop Fastener
- Ċinga Hook-and-Loop x 2
- Picatinny Rail Mount x 2 (mhux obbligatorju)
- NITECORE NBP100R Li-ion Battery Pack (10,000mAh)
- Cable tal-Iċċarġjar tal-USB-C
- O-ring żejda
- Holster
- Lanyard
Figure 9: Visual representation of all items included in the Nitecore MH40 PRO package.
Garanzija u Appoġġ
The Nitecore MH40 PRO comes with a limited warranty. For detailed warranty terms and conditions, please refer to the warranty card included in your package or visit the official Nitecore websit.
For technical support, troubleshooting assistance, or warranty claims, please contact Nitecore customer service through their official webis-sit jew il-bejjiegħ bl-imnut li mingħandu xtrajt il-prodott.
Manifattur: SYSMAX Innovations Co., Ltd.
