1. Setup
Upon receiving your Timex Ironman Triathlon Adrenaline watch, follow these steps for initial setup.
1.1 L-issettjar tal-Ħin u d-Data
Your watch features both analog hands and a digital display. Both need to be set for accurate timekeeping.
- Digital Time/Date: Agħfas il- MODALITÀ button repeatedly until the desired setting mode (e.g., Time Set, Date Set) is displayed. Use the SSET/SEJĦAR or STOP / RESET buttons to adjust values. Confirm settings by pressing MODALITÀ again or waiting for the watch to exit the setting mode automatically.
- Idejn Analogi: Pull the crown (the small knob on the side of the watch) out to the first or second position (refer to the diagram below for specific crown positions). Rotate the crown to move the analog hands to the correct time. Push the crown back in to resume timekeeping.
1.2 Informazzjoni dwar il-batterija
The watch comes with a Lithium Metal battery pre-installed. If the digital display is dim or unresponsive, the battery may need replacement. Refer to the Maintenance section for more details.
2. Istruzzjonijiet Operattivi
Understand the various functions and how to use the buttons on your Timex Ironman watch.
2.1 Funzjonijiet tal-buttuni
- MODE Button (Left Side): Cycles through different display modes such as Time, Date, Chronograph, Timer, and Alarm. Also used to confirm settings.
- SET/RECALL Button (Top Right): Used to adjust values during setting modes and to recall stored data (e.g., lap times).
- INDIGLO Button (Top Left): Activates the INDIGLO night-light for illumination of the digital display.
- STOP/RESET Button (Bottom Right): Used to stop and reset functions like the chronograph or timer.
- START/LAP Button (Bottom Left): Used to start functions like the chronograph or timer, and to record lap times.
2.2 Modi ta' Wiri Diġitali
Agħfas il- MODALITÀ buttuna biex tiċċirkola permezz tal-modi li ġejjin:
- Modalità tal-Ħin: Displays current time (hour, minute, second), day of the week, and date.
- Modalità Kronografu: A stopwatch function for measuring elapsed time, lap times, and split times. Use BIDU/LAP to begin/record laps and STOP / RESET to stop/reset.
- Modalità Timer: A countdown timer. Set the desired countdown duration using the SSET/SEJĦAR u STOP / RESET buttons in setting mode.
- Mod ta 'allarm: Set up to two daily alarms. The alarm will sound at the set time.
2.3 INDIGLO Night-Light
Agħfas il- INDIGLO buttuna (fuq ix-xellug) biex iddawwal id-displej diġitali għal faċli viewing in low-light conditions. The light will remain on for a few seconds.
3. Manutenzjoni
Proper care ensures the longevity and performance of your watch.
3.1 Tindif
Imsaħ il-kaxxa u ċ-ċinga tal-arloġġ b'ċarruta ratba uamp drapp. Għal ħmieġ iebes, tista' tintuża soluzzjoni ta' sapun ħafif, segwita minn tlaħliħ b'ilma nadif u tnixxif sewwa. Evita kimiċi ħarxa jew materjali li joborxu.
3.2 Reżistenza għall-Ilma
Your watch is water resistant up to 100 meters (330 feet). This makes it suitable for showering, swimming, and snorkeling. However, it is not recommended for scuba diving or high-impact water sports. Do not operate buttons underwater.
3.3 Sostituzzjoni tal-batterija
The watch uses one Lithium Metal battery (CR2016). When the display becomes dim or functions are erratic, the battery may need replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and water resistance.
3.4 Informazzjoni dwar is-Sigurtà
- Avoid high-impact water activities.
- Żomm 'il bogħod mit-tfal żgħar.
- Dispose of batteries safely according to local regulations.
4 Issolvi l-problemi
Jekk tiltaqa' ma' problemi bl-arloġġ tiegħek, irreferi għall-problemi u s-soluzzjonijiet komuni li ġejjin.
- Il-Wiri Diġitali huwa Vojt jew Mudlama: Dan ġeneralment jindika batterija baxxa. Ibdel il-batterija kif deskritt fit-taqsima tal-Manutenzjoni.
- L-Idejn Analogi Ma Jaqblux mal-Ħin Diġitali: The analog hands and digital display are set independently. Follow the instructions in Section 1.1 to synchronize both.
- Buttons Are Unresponsive: Ensure the watch is not in a locked mode (if applicable, consult full manual for specific model lock features). A low battery can also cause unresponsive buttons. Try replacing the battery.
- Chronograph Resets Unexpectedly: This may indicate a software glitch or low power. Try replacing the battery. If the issue persists, a factory reset (if available for your model, consult full manual) or professional service may be required.
- Time is Inaccurate (Losing/Gaining Time): This could be due to a low battery or a need for recalibration. Replace the battery first. If the problem continues, professional service is recommended.
- INDIGLO Night-Light Not Working: Check the battery. If the battery is low, the night-light may be the first function to fail.
If these steps do not resolve the issue, please contact Timex customer support.
5. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | TW2W53600VQ |
| ASIN | B0DFQHFM6V |
| Dijametru tal-Każ | 46.5mm |
| Materjal tal-Każ | Iswed |
| Tip ta' Banda | 8-inch black two-piece quick release |
| Tip ta 'Wiri | Analog-Digital (Negative Digital Display) |
| Materjal tal-Lenti | Ħġieġ minerali |
| Reżistenza għall-Ilma | 100 metru (330 pied) |
| Tip ta 'batterija | 1 batterija tal-litju tal-metall (CR2016) |
| Piż | 7.65 uqija |
6. Garanzija u Appoġġ
6.1 Garanzija tal-Manifattur
Your Timex watch is covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region. Please retain your proof of purchase for warranty claims.
6.2 Appoġġ għall-Klijent
For detailed warranty information, service inquiries, or additional support, please visit the official Timex websit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom.
Tista' ssib aktar informazzjoni u dettalji ta' kuntatt fuq Ħanut Timex fuq Amazon.
