Introduzzjoni
This manual provides detailed instructions for the installation, operation, and maintenance of your Maxxima 2-inch Rotatable Ultra-Thin Recessed LED Floating Gimbal Downlight. This energy-efficient LED downlight offers versatile lighting solutions with its rotatable design and selectable color temperature feature. Please read these instructions thoroughly before installation and retain them for future reference.
Karatteristiċi ewlenin:
- 5 CCT Selectable: Choose from 2700K (Soft White), 3000K (Warm White), 3500K (Bright White), 4000K (Neutral White), or 5000K (Daylight) using the switch on the junction box.
- Rotatable Gimbal: Features 360° rotation and 90° tilt for precise light direction.
- Dimmable: Compatible with most standard LED dimmers, offering a dimmable range of 10-100%.
- Disinn mingħajr kontenitur: No separate housing required; installs directly into the ceiling with spring clips.
- CRI għoli: 90 CRI for accurate color rendering.
- IC Rated: Adattat għal kuntatt dirett ma 'insulazzjoni.
- Damp Ikklassifikat: Ideal for various indoor environments including bathrooms and kitchens.
Informazzjoni dwar is-Sigurtà
TWISSIJA: Riskju ta' Nar jew Xokk Elettriku.
- L-installazzjoni għandha titwettaq minn elettriċista kwalifikat skont il-kodiċijiet elettriċi nazzjonali u lokali kollha.
- Itfi l-enerġija mis-circuit breaker qabel l-installazzjoni jew is-servizz.
- Kun żgur li l-konnessjonijiet kollha huma siguri u iżolati kif suppost.
- Do not modify or alter the fixture.
- This fixture is designed for 120VAC circuits only.
- Do not use with dimmers not specifically designed for LED lighting.
Kontenut tal-Pakkett
- 1x Maxxima 2-inch Rotatable Ultra-Thin Recessed LED Floating Gimbal Downlight (Model MRL-S20555B)
- 1x Remote Junction Box with CCT Select Switch
- Foam Gasket (pre-installed for air-tight application)
Image: The Maxxima 2-inch Rotatable Ultra-Thin Recessed LED Floating Gimbal Downlight, showing the main light fixture with spring clips and the connected remote junction box.
Speċifikazzjonijiet
| Numru tal-Mudell | MRL-S20555B |
| Konsum tal-Enerġija | 5 Watts (ekwivalenti għal 40W inkandexxenti) |
| Fluss Luminuż | 360 Lumens |
| Input Voltage | 120VAC |
| Temperatura tal-Kulur (CCT) | Jintgħażel: 2700K, 3000K, 3500K, 4000K, 5000K |
| Indiċi tar-Rendiment tal-Kulur (CRI) | 90 |
| Dimmability | 10% - 100% (with compatible LED dimmers) |
| Angolu tar-raġġ | 38° |
| Angolu ta' Rotazzjoni | 360° |
| Angolu Mejjel | 90° |
| Dimensjonijiet tal-Fitture | 1.3” Deep x 3.55” Diameter (0.7” trim width) |
| Junction Box Dimensions | 4.7” W x 1.8” L X 2” H |
| Wire Length (Fixture to J-Box) | 16.9” |
| Materjal | Cast Aluminum body, Polycarbonate lens |
| Ċertifikazzjonijiet | ETL Listed, IC Rated, Damp Rated |
Setup u Installazzjoni
- Ipprepara ż-Żona tal-Installazzjoni:
Turn off power at the circuit breaker before beginning installation. Ensure the ceiling area is clear of obstructions and suitable for recessed lighting.
- Cut the Ceiling Opening:
Using a hole saw, cut a 2-inch diameter hole in the ceiling drywall at the desired location. Ensure the hole is clean and smooth.
Immaġni: Minn fuq għal isfel view of the recessed light, highlighting the spring clips used for installation.
- Connect Wiring to Junction Box:
Open the remote junction box. Connect the household electrical wires (live, neutral, ground) to the corresponding wires inside the junction box using appropriate wire connectors. Ensure all connections are secure.
Image: The back of the recessed light, showing the wire connecting to the junction box and the spring clips.
- Agħżel it-Temperatura tal-Kulur (CCT):
Before closing the junction box and installing it into the ceiling, use the CCT selector switch located on the side of the junction box to choose your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K).
Image: A close-up of the remote junction box, clearly showing the 5-position CCT selector switch for choosing light color.
- Place Junction Box:
Once wiring is complete and CCT is selected, close the junction box and place it inside the ceiling cavity, ensuring it rests securely on a ceiling beam or is otherwise supported.
- Install the Downlight:
Push the spring clips on the downlight upwards and insert the fixture into the ceiling opening. Release the clips to secure the downlight flush against the ceiling. The foam gasket will ensure an air-tight seal.
Image: An installed Maxxima recessed light in a ceiling, demonstrating the adjustable gimbal feature.
- Irrestawra l-Enerġija:
Ladarba l-installazzjoni tkun tlestiet, erġa' daħħal l-enerġija fis-circuit breaker u ittestja d-dawl.
Istruzzjonijiet Operattivi
- Power On/Off: Control the light using a standard wall switch or dimmer switch connected to the circuit.
- Aġġusta t-Temperatura tal-Kulur (CCT): The CCT is set during installation via the switch on the junction box. To change the CCT, power must be turned off at the breaker, the fixture removed, and the switch on the junction box adjusted.
- Dimming: If connected to a compatible LED dimmer, adjust the dimmer switch to achieve the desired brightness level (10-100%).
- Aġġusta tad-Direzzjoni tad-Dawl: The gimbal mechanism allows for 360° rotation and 90° tilt. Gently push or pull the inner light module to rotate it or tilt it to direct the light as needed.
Image: A Maxxima recessed light demonstrating its full range of rotation and tilt, allowing for flexible light direction.
Manutenzjoni
- Tindif: Kun żgur li l-elettriku jkun mitfi qabel ma tnaddaf. Imsaħ l-apparat b'ċarruta ratba, niexfa, jew kemxejn imxarrba.amp drapp. Tużax tindif jew solventi li joborxu.
- L-ebda Partijiet li jistgħu jservu mill-utent: The LED light source is integrated and not replaceable. Do not attempt to open or repair the fixture.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-dawl ma jixgħelx. | Bla dawl, wajers maħlula, swiċċ difettuż. | Iċċekkja s-circuit breaker. Ivverifika li l-konnessjonijiet tal-wajers kollha huma sikuri. Ittestja s-swiċċ. |
| Id-dawl jitteptep jew jitbaxxa ħażin. | Incompatible dimmer, loose wiring. | Ensure dimmer is compatible with LED fixtures. Check wiring connections. |
| Temperatura tal-kulur mhux korretta. | Is-swiċċ tas-CCT mhux issettjat sew. | Turn off power, remove fixture, and adjust the CCT switch on the junction box. |
Garanzija u Appoġġ
This Maxxima product is backed by a garanzija ta 'sena mid-data tax-xiri. Din il-garanzija tkopri difetti fil-materjali u l-abbilità taħt użu normali.
For technical support, warranty claims, or further assistance, please visit the official Maxxima webis-sit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom. Tista' ssib aktar informazzjoni u prodotti fuq Ħanut Maxxima fuq Amazon.
