1. Introduzzjoni
Thank you for choosing the SilverStone NovaPeak 240 ARGB All-in-one Liquid Cooler. This product is designed to provide efficient cooling for your Intel or AMD processor while offering customizable ARGB lighting effects. This manual provides essential information for proper installation, operation, and maintenance of your liquid cooler.
Image 1.1: SilverStone NovaPeak 240 ARGB Liquid Cooler with two ARGB fans and pump head.
2. Informazzjoni dwar is-Sigurtà
Please read and understand the following safety precautions before installation and operation:
- Kun żgur li s-sistema tiegħek tkun mitfija u skonnettjata mis-sokit tal-ħajt qabel l-installazzjoni.
- Immaniġġja l-komponenti b'attenzjoni biex tevita l-ħsara.
- Do not attempt to open or modify the liquid cooler components.
- Żomm il-prodott 'il bogħod mill-umdità u temperaturi estremi.
- If any leakage is observed, immediately power off your system and contact support.
3. Kontenut tal-Pakkett
Ivverifika li l-komponenti kollha huma preżenti fil-pakkett:
- NovaPeak 240 ARGB Liquid Cooler (Radiator, Pump, Tubing)
- 2x 120mm ARGB Radiator Fans
- Mounting Hardware for Intel LGA 115x/1200/1700/1851/2011/2066 sockets
- Mounting Hardware for AMD AM5/AM4 sockets
- Kontrollur ARGB
- Pejst Termali
- Manwal għall-Utent
4. Gwida għall-Installazzjoni
Follow these steps carefully for proper installation. Refer to your motherboard and PC case manuals for specific guidance on component placement.
4.1. Ipprepara r-Radjatur u l-Fannijiet
- Attach the two 120mm ARGB fans to the radiator using the provided screws. Ensure the fan airflow direction is appropriate for your case's cooling strategy (typically exhausting air out of the case).
- Connect the fan PWM and ARGB cables. The NovaPeak fans feature a modular cabling design for streamlined connectivity, allowing daisy-chaining.
Image 4.1: Fans connected via daisy-chain for simplified cable management.
4.2. Installa r-Radjatur
- Mount the radiator assembly into your PC case. Common mounting locations include the top or front of the case. Secure it with the appropriate screws.
Immaġni 4.2: Ġenb view of the radiator with fans attached.
4.3. Prepare the CPU and Pump
- Clean the CPU surface thoroughly to remove any old thermal paste or debris.
- Applika ammont żgħir ta' pejst termali (tikka daqs piżella) fiċ-ċentru tal-heat spreader integrat tas-CPU (IHS).
Image 4.3: The pump's copper baseplate, designed for firm contact with the processor.
4.4. Mount the Pump to the CPU
- Select the appropriate mounting bracket for your CPU socket (Intel or AMD).
- Attach the chosen bracket to the pump head.
- Carefully place the pump head onto the CPU, aligning the mounting holes.
- Secure the pump head to the motherboard using the provided screws and backplate (if required for your socket type). Tighten screws in a diagonal pattern until snug.
4.5. Ġestjoni tal-Kejbil
- Connect the pump's 3-pin power cable to an available fan header on your motherboard (often labeled 'AIO_PUMP' or 'CPU_OPT').
- Connect the ARGB cables from the fans and pump to the included ARGB controller.
- Connect the ARGB controller to a SATA power connector from your power supply and to a 3-pin 5V ARGB header on your motherboard (if you wish to control lighting via motherboard software).
- Organize all cables to ensure proper airflow and a clean build.
5. Operazzjoni
Once installed, the NovaPeak 240 ARGB Liquid Cooler operates automatically based on your system's thermal load. The pump and fans will adjust their speed to maintain optimal CPU temperatures.
5.1. Kontroll tad-Dawl ARGB
The included ARGB controller allows you to cycle through 10 lighting modes, adjust brightness, and change light speed. Alternatively, if connected to a compatible motherboard ARGB header, you can control the lighting effects using your motherboard's synchronization software.
Image 5.1: Close-up of the pump head showcasing ARGB lighting.
6. Manutenzjoni
Manutenzjoni regolari tiżgura prestazzjoni ottimali u lonġevità tal-likwidu li jkessaħ tiegħek.
- Tindif tat-Trab: Naddaf it-trab mill-ġwienaħ tar-radjatur u x-xfafar tal-fann perjodikament billi tuża arja kkompressata jew pinzell artab. Kun żgur li l-fannijiet ma jkunux qed iduru waqt it-tindif.
- Spezzjoni tat-Tubi: Visually inspect the tubing for any signs of kinks, damage, or leaks.
- Storbju tal-Pompa: The pump is designed for quiet operation. If unusual noises occur, ensure proper mounting and contact support if the issue persists.
7 Issolvi l-problemi
Jekk tiltaqa' ma' problemi, irreferi għall-problemi u s-soluzzjonijiet komuni li ġejjin:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Temperaturi Għolja tas-CPU | Improper thermal paste application, loose pump mounting, insufficient airflow, pump failure. | Reapply thermal paste, check pump mounting, ensure fans are correctly oriented, verify pump is powered. |
| Il-Fannijiet Mhux Iduru / L-ARGB Mhux Jixgħel | Incorrect cable connections, faulty ARGB controller, insufficient power. | Check all PWM and ARGB connections, ensure SATA power is connected to the controller, test with different ARGB header if possible. |
| Storbju mhux tas-soltu tal-pompa | Air bubbles in the loop, pump malfunction. | Orient the radiator higher than the pump if possible to allow air to collect in the radiator. If noise persists, contact support. |
8. Speċifikazzjonijiet
Key technical specifications for the SilverStone NovaPeak 240 ARGB Liquid Cooler:
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | SST-NP240-ARGB |
| Materjal tar-radjatur | Aluminju |
| Materjal tal-Bażi tal-Pompa | Ram |
| Veloċità tal-fann | 500 - 2,200 RPM (ikkontrollat mill-PWM) |
| Livell ta' Storbju | 12.1 dB (minimu) |
| Sokits Kompatibbli | Intel LGA 115x/1200/1700/1851/2011/2066, AMD AM5/AM4 |
| Tul tat-tubu | 460mm |
| Disinn tal-Pompa | Three-phase, six-pole motor |
Image 8.1: The pump's three-phase, six-pole motor design for smooth and quiet operation.
9. Garanzija u Appoġġ
SilverStone Technology provides a limited warranty for this product. Please refer to the official SilverStone webis-sit jew l-imballaġġ tal-prodott tiegħek għal termini u kundizzjonijiet dettaljati tal-garanzija.
For technical support, troubleshooting assistance, or warranty claims, please visit the official SilverStone Technology support page or contact their customer service directly. You can find contact information on their websit: www.silverstonetek.com
