1. Introduzzjoni
Thank you for choosing the Fostex Vacuum Magnetic Phone Holder, model CZ16-1. This device is designed to provide a secure and adjustable mounting solution for your smartphone in various environments, including your car, home, or office. It features a strong magnetic connection combined with a vacuum adsorption mechanism for enhanced stability. This manual provides detailed instructions for proper installation, operation, and maintenance to ensure optimal performance and longevity of your device.
2. Kontenut u Komponenti tal-Pakkett
Jekk jogħġbok ivverifika li l-komponenti kollha huma preżenti qabel ma tipproċedi bl-installazzjoni.
- Fostex Vacuum Magnetic Phone Holder (Main Unit)
- Detachable Magnetic Ring (for non-MagSafe phones/cases)
- Adhesive Pad (for metal ring attachment)
- USB Type-C Charging Cable (for internal battery)
Figura 2.1: Sploda view showing the motorized suction cup, Type-C port, one-click release button, suction contact, silicone pad, N52 strong magnet, detachable magnetic ring, universal joint, and adhesive.
3. Setup u Installazzjoni
3.1 Preparing Your Phone
The Fostex Vacuum Magnetic Phone Holder is compatible with MagSafe-enabled iPhones (iPhone 12/13/14/15 series) and MagSafe-compatible cases directly. For other smartphones or cases without MagSafe, a metal ring must be attached to your phone or case.
- For Non-MagSafe Phones/Cases:
- Clean the back surface of your phone or case thoroughly.
- Peel off the protective film from the adhesive side of the metal ring.
- Carefully align and firmly press the metal ring onto the desired location on your phone or case. Ensure it is centered for optimal magnetic connection.
- Allow the adhesive to cure for at least 24 hours before first use to ensure maximum adhesion.
- For MagSafe-Compatible Phones/Cases: No additional steps are required. The phone will directly attach magnetically to the holder.
Figura 3.1: Steps for attaching the metal ring to a non-MagSafe phone/case and then attaching the phone to the holder.
3.2 Mounting the Holder
The holder can be mounted on any smooth, flat surface.
- Choose a clean, flat, and smooth surface for mounting (e.g., car dashboard, windshield, mirror, tile, wall, glass, table).
- Ensure the surface is free from dust, grease, or moisture. Clean with an alcohol wipe if necessary and let it dry completely.
- Place the base of the phone holder onto the chosen surface.
- Press the holder firmly against the surface. The motorized vacuum suction cup will automatically activate and grip the surface, creating a strong seal.
- To release the holder, press the one-click release button located on the side of the unit.
Figura 3.2: The Fostex holder securely mounted on a car dashboard, demonstrating its vacuum adsorption feature.
Figura 3.3: The Fostex holder demonstrating its versatility by being mounted on a wall.
4. Istruzzjonijiet Operattivi
4.1 Kif Twaħħal it-Telefon Tiegħek
Once the holder is securely mounted, you can attach your phone.
- Bring your phone (with or without the metal ring, depending on compatibility) close to the magnetic surface of the holder.
- The N52 strong magnet will automatically attract and secure your phone.
- Ensure the phone is centered on the magnetic surface for the strongest hold.
Figura 4.1: The Fostex holder with a phone attached, illustrating the secure magnetic connection and adjustable angle.
4.2 L-aġġustament tal- ViewIng Angolu
The holder features a 360-degree rotatable universal joint, allowing you to adjust your phone to the optimal viewangolu tal-ing.
- Gently rotate your phone while it is attached to the magnetic surface to achieve your desired horizontal or vertical orientation.
- The universal joint allows for flexible tilting and rotation to suit various viewbżonnijiet.
Figura 4.2: Visual representation of the 360-degree rotation capability for flexible angle adjustment.
4.3 Charging the Holder
The vacuum adsorption function is powered by an internal Lithium Ion battery. When the vacuum suction weakens or the device indicates low power, recharge it using the provided Type-C cable.
- Connect the Type-C cable to the charging port on the side of the holder.
- Connect the other end of the cable to a standard USB power source (e.g., car charger, wall adapter, computer USB port).
- A charging indicator light (if present) will illuminate during charging and turn off or change color when fully charged.
5. Manutenzjoni
- Tindif: Regularly wipe the magnetic surface and the suction cup base with a soft, damp cloth to remove dust and debris. Ensure the suction cup is clean for optimal adhesion.
- Ħażna: When not in use for extended periods, store the holder in a cool, dry place away from direct sunlight.
- Kura tal-batterija: To prolong battery life, avoid fully discharging the battery frequently. Recharge when the power is low.
6 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Holder does not stick firmly to the surface. |
|
|
| It-telefon ma jitwaħħalx manjetikament jew jaqa'. |
|
|
| Battery drains quickly or does not hold a charge. |
|
|
7. Speċifikazzjonijiet
- Numru tal-Mudell: ĊZ16-1
- Dimensjonijiet tal-Prodott: 2.09 x 2.09 x 2.28 pulzieri
- Piż tal-oġġett: 4.2 uqija
- Qawwa Manjetika: N52 Strong Magnet
- Sors tal-Enerġija: Lithium Ion Battery (rechargeable via Type-C)
- Materjal: Aluminum Alloy + PC + POM
- Kompatibilità: Smartphones (MagSafe compatible or with included metal ring)
- Tip ta 'Immuntar: Vacuum Suction (Wall Mount, Dashboard, Glass, etc.)
- Karatteristiċi Speċjali: 360-degree Adjustable Rotation, One-click Release
8. Garanzija u Appoġġ
For warranty information or technical support, please refer to the product packaging or contact Fostex customer service directly. Contact details can typically be found on the official Fostex webis-sit jew permezz tal-pjattaforma tax-xiri tiegħek.
