TechniSat DIGICLOCK 3 FM Projection Radio Alarm Clock User Manual

Introduzzjoni

The TechniSat DIGICLOCK 3 is an FM projection radio alarm clock designed to display time clearly on its LED screen and project it onto a wall or ceiling. This manual provides detailed instructions for its setup, operation, and maintenance to ensure optimal performance.

Immaġni: Quddiem view of the TechniSat DIGICLOCK 3, showing the digital time display and the time projected from the top.

1. Setup

1.1 Konnessjoni tal-Enerġija

Connect the integrated power adapter to a standard electrical outlet. For backup power during outages, insert optional batteries (not included) into the battery compartment. This ensures time and alarm settings are retained.

1.2 Konnessjoni tal-antenna

Extend the integrated FM wire antenna for optimal radio reception. Position the antenna away from other electronic devices to minimize interference.

1.3 Issettjar tal-Ħin Inizjali

Upon first power-up or after a complete power loss without battery backup, the time may need to be set manually. Refer to the "Setting Time and Date" section under Operating Instructions for details.

2. Istruzzjonijiet Operattivi

2.1 Kontrolli Fuqview

Immaġni: Fuq view of the alarm clock, highlighting the various control buttons for time, alarm, radio, and projection functions.

The top panel of the DIGICLOCK 3 features several buttons for controlling its functions:

• TIME SET / PRESET: Used to set the time and save/recall radio presets.
• ALLARM: Activates/deactivates alarms.
• PROJECTION ON/OFF / 180° FLIP: Controls the projection feature and flips the projected image.
• SNOOZE / SLEEP: Activates snooze during an alarm or sets the sleep timer for radio playback.
• AL VOL+ / AL VOL-: Adjusts alarm volume.
• MIN/TUNE+ / HOUR/TUNE-: Adjusts minutes/hours and tunes radio frequencies.

2.2 L-issettjar tal-Ħin u d-Data

1. Agħfas u żomm il- IL-ĦIN IPPOST button. The hour display will flash.
2. Uża l- HOUR/TUNE- u MIN/TUNE+ buttuni biex taġġusta s-siegħa.
3. Agħfas IL-ĦIN IPPOST għal darb'oħra. L-iskrin tal-minuti jibda jteptep.
4. Uża l- HOUR/TUNE- u MIN/TUNE+ buttuni biex jaġġustaw il-minuti.
5. Agħfas IL-ĦIN IPPOST biex tikkonferma u toħroġ mill-modalità tal-issettjar tal-ħin.

2.3 Funzjonijiet ta' Allarm

The DIGICLOCK 3 supports two independent alarms (Alarm 1 and Alarm 2).

L-issettjar ta' Allarm:

1. Agħfas u żomm il- ALLARM button. "AL1" or "AL2" will flash.
2. Agħfas ALLARM repeatedly to select Alarm 1 or Alarm 2.
3. Użu HOUR/TUNE- u MIN/TUNE+ biex tissettja l-ħin tal-allarm mixtieq.
4. Agħfas ALLARM biex tikkonferma l-ħin.
5. Select the alarm source (FM radio or buzzer) using HOUR/TUNE- u MIN/TUNE+.
6. Agħfas ALLARM to confirm and activate the alarm. An alarm icon will appear on the display.

Funzjoni Snooze:

Meta tinstema' allarm, agħfas il-buttuna SNOOZE buttuna biex isikketha temporanjament. L-allarm jerġa' jdoqq wara madwar 9 minuti.

Twaqqif ta' Allarm:

To stop an alarm completely, press the ALLARM button. The alarm will reset for the next day. To deactivate an alarm, press the ALLARM Agħfas il-buttuna sakemm l-ikona tal-allarm tisparixxi mid-displej.

2.4 Tħaddim tar-Radju FM

Tuning Radio Stations:

Agħfas il- RADJU ON/OFF button to turn on the FM radio. Use the HOUR/TUNE- u MIN/TUNE+ buttons to manually tune to a desired frequency. Press and hold these buttons for automatic scanning.

Il-ħażna u t-tifkira ta' presets:

The device can store up to 10 FM radio stations.

1. Intuna l-istazzjon mixtieq.
2. Agħfas u żomm il- Issettjat minn qabel button until a preset number flashes.
3. Użu HOUR/TUNE- u MIN/TUNE+ to select a preset number (P01-P10).
4. Agħfas Issettjat minn qabel għal darb'oħra biex issalva l-istazzjon.
5. Biex tirrevoka preset, agħfas fil-qosor il-buttuna Issettjat minn qabel buttuna u mbagħad uża HOUR/TUNE- u MIN/TUNE+ biex tagħżel il-preset mixtieqa.

Timer ta 'l-Irqad:

Waqt li r-radju jkun qed idoqq, agħfas il-buttuna L-IRQAD button repeatedly to set a sleep timer (e.g., 90, 60, 30, 15 minutes). The radio will automatically turn off after the set time.

2.5 Time Projection

Immaġni: Ġenb view of the alarm clock, focusing on the projector lens which can be rotated to adjust the projection angle.

The DIGICLOCK 3 features an integrated projector to display the time on a wall or ceiling.

• Activating/Deactivating Projection: Agħfas il- PROJEZZJONI ON / OFF button to turn the projection on or off.
• L-Aġġustament tal-Angolu tal-Projezzjoni: Rotate the projector lens on top of the unit to adjust the angle of the projected time up to 180 degrees.
• Flipping Projected Image: If the projected time appears upside down, press the FLIP 180 ° button (often combined with PROJECTION ON/OFF) to rotate the image 180 degrees.
• Aġġustament Focus: A small ring around the projector lens can be rotated to adjust the focus of the projected image for clarity.

Note: The clarity and visibility of the projected time may vary depending on ambient light conditions and projection distance. Optimal projection distance is typically within 1 to 1.5 meters.

2.6 Il-luminożità tal-wiri

The 1.2-inch LED display offers two brightness levels. Briefly press the SNOOZE button (when no alarm is active) to cycle between the brighter and dimmer display settings.

3. Manutenzjoni

3.1 Tindif

Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the surface. Ensure no liquids enter the device.

3.2 Sostituzzjoni tal-batterija

If using optional backup batteries, replace them periodically (e.g., annually) or when the display shows signs of power loss during an outage. Use the specified battery type and dispose of old batteries responsibly.

4 Issolvi l-problemi

5. Speċifikazzjonijiet

6. Garanzija u Appoġġ

Spare parts availability for this product is indicated for 1 year from the date of purchase. For further support or warranty inquiries, please refer to the contact information provided with your purchase documentation or visit the official TechniSat websit.