RAB H17S Field Adjustable LED Highbay User Manual

1. Introduzzjoni

The RAB H17S LED Highbay is a compact, high-output lighting fixture designed for commercial and industrial applications. It features field-adjustable wattage (60W/80W/100W) and color temperature (3000K/4000K/5000K), providing versatility for various lighting needs. This highbay is suitable for wet locations with an IP65 ingress protection rating and includes 0-10V dimming capabilities. It comes standard with a hanging hook and a 6-foot cord for easy installation.

2. Informazzjoni dwar is-Sigurtà

TWISSIJA: To prevent serious injury or death, always follow basic safety precautions when installing, operating, or maintaining electrical equipment.

• L-installazzjoni għandha titwettaq minn elettriċista kwalifikat skont il-kodiċijiet elettriċi nazzjonali u lokali kollha.
• Skonnettja l-enerġija mis-circuit breaker jew mill-kaxxa tal-fjużijiet qabel l-installazzjoni jew is-servizz.
• Tiżgura l-provvista voltage is correct (120-277V) before connecting the fixture.
• Do not handle energized fixture with wet hands or when standing on wet or damp uċuħ.
• This fixture is suitable for wet locations. Ensure all connections are properly sealed to maintain IP65 rating.
• Do not look directly into the LED light source when the fixture is powered on.

3. X'hemm fil-Kaxxa

Your RAB H17S LED Highbay package includes the following components:

• 1 x RAB H17S LED Fixture (with integrated hanging hook and 6-foot cord)

Figure 3.1: The RAB H17S LED Highbay, showing the main unit with its integrated hanging hook.

4. Setup u Installazzjoni

4.1. Immuntar

The H17S Highbay comes standard with a heavy-duty 3/4"-14 NPT hook for suspension mounting. It is also capable of 3/4"-14 pendant mounting (pendant sold separately).

1. Ensure the mounting structure can safely support the weight of the fixture (approximately 4.7 pounds).
2. For hook mounting, securely attach the fixture's integrated hook to a suitable ceiling hook or chain.
3. For pendant mounting, remove the hanging hook and attach a compatible 3/4"-14 NPT pendant to the fixture's mounting point.

Figure 4.1: Dimensions of the RAB H17S LED Highbay, indicating a width of 10 1/4 inches and a height of 7 3/8 inches including the hook.

4.2. Il-wajers

The H17S Highbay operates on 120-277 Volts and includes wiring for 0-10V dimming systems.

1. Ensure power is OFF at the circuit breaker before beginning any wiring.
2. Connect the fixture's black wire to the LINE (L) conductor.
3. Connect the fixture's white wire to the NEUTRAL (N) conductor.
4. Connect the fixture's green wire to EARTH GROUND (G).
5. For 0-10V dimming, connect the purple wire to the DIM+ (0-10V+) lead from the dimming control and the pink/gray wire to the DIM- (0-10V-) lead. If dimming is not used, cap off the purple and pink/gray wires individually.
6. Assigura l-konnessjonijiet kollha tal-wajers bi skorfini jew konnetturi tal-wajers xierqa.
7. Ensure all wiring is contained within a suitable junction box or conduit.

5. Istruzzjonijiet Operattivi

The RAB H17S Highbay features field-adjustable settings for both color temperature (CCT) and wattage, allowing customization to suit specific lighting requirements.

5.1. Field Adjustable CCT (Color Temperature)

The fixture allows selection between 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight) color temperatures.

1. Locate the CCT selector switch on the side of the fixture. This switch is typically a small, recessed toggle or slide switch.
2. Using a small screwdriver or similar tool, carefully move the switch to the desired CCT setting (3000K, 4000K, or 5000K).
3. Ensure the switch clicks firmly into place for the selected setting.

5.2. Wat Aġġustabbli fil-Qasamtage

The fixture can be set to operate at 60W, 80W, or 100W, affecting its lumen output.

1. Sib il-wattage selector switch, usually adjacent to the CCT switch.
2. Carefully move the switch to the desired wattagissettjar e (60W, 80W, jew 100W).
3. Ensure the switch clicks firmly into place for the selected setting.

Figura 5.1: Ġenb view of the RAB H17S Highbay, showing the general location where selector switches for CCT and wattage are typically found.

Figura 5.2: Qiegħ view of the RAB H17S Highbay, illustrating the circular arrangement of the LED array.

5.3. Dimming

The H17S Highbay supports 0-10V dimming systems, allowing the light output to be dimmed as low as 10%.

• Ensure the fixture is correctly wired to a compatible 0-10V dimming control (refer to Section 4.2 Wiring).
• Operate the dimming control according to its manufacturer's instructions to adjust the light output.

6. Manutenzjoni

The RAB H17S LED Highbay is designed for minimal maintenance. Regular cleaning can help maintain optimal performance and appearance.

• Tindif: Skonnettja l-provvista tal-enerġija qabel it-tindif. Uża drapp artab u damp cloth to wipe the exterior of the fixture. Do not use abrasive cleaners or solvents, as they may damage the finish or optical components.
• Spezzjoni: Periodically inspect the fixture and its mounting hardware for any signs of damage or wear. Ensure all connections remain secure.

7 Issolvi l-problemi

If you experience issues with your RAB H17S LED Highbay, refer to the following common troubleshooting steps:

If the problem persists after attempting these solutions, please contact RAB Lighting customer support.

8. Speċifikazzjonijiet

Detailed technical specifications for the RAB H17S LED Highbay:

9. Garanzija u Appoġġ

For information regarding product warranty, technical support, or replacement parts, please contact RAB Lighting directly. Refer to the official RAB Lighting webis-sit jew id-dokumentazzjoni tax-xiri tiegħek għall-aktar informazzjoni ta' kuntatt u termini tal-garanzija aġġornati.

RAB Lighting Contact Information:
Jekk jogħġbok żur www.rablighting.com għal appoġġ u dettalji ta' kuntatt.