Manwal tal-Utent tar-Robot tat-Trasformazzjoni tal-Karozza RC DEERC Spider (Skala 1:18)

1. Introduzzjoni

Thank you for choosing the DEERC Spider RC Car Transform Robot. This remote-controlled toy offers dynamic transformation between a high-speed car and an agile robot, featuring 2.4GHz control, 360-degree rotation, and one-key transformation. This manual provides essential information for safe operation, setup, and maintenance to ensure optimal performance and enjoyment.

Image 1.1: The DEERC Spider RC Car Transform Robot in its car and robot configurations, alongside its remote control unit.

2. Informazzjoni dwar is-Sigurtà

Please read and understand all safety warnings before operating the product. Failure to follow these instructions may result in injury or damage to the product.

• Għal użu estern biss. Do not ingest any parts of the toy or battery.
• Dan il-prodott huwa rakkomandat għal etajiet ta’ 8 snin ’il fuq. Is-superviżjoni ta’ adult hija rakkomandata għal utenti iżgħar.
• Keep fingers, hair, and loose clothing away from moving parts, especially during transformation.
• Do not operate the toy near water or in wet conditions to prevent electrical damage.
• Use only the provided charging cable and battery. Do not attempt to charge non-rechargeable batteries.
• If the battery becomes hot during charging or use, discontinue use immediately.
• Avoid operating the toy in crowded areas or near obstacles that could cause collisions.
• Aħżen il-prodott f'post frisk u niexef meta ma jkunx qed jintuża.

3. Kontenut tal-Pakkett

Verify that all items are present in the package before beginning setup.

• DEERC Spider RC Car Transform Robot
• Kontroll mill-bogħod
• Rechargeable Lithium Ion Battery (for the toy)
• Cable tal-Iċċarġjar tal-USB
• Tornavit
• Manwal tal-Prodott (dan id-dokument)

Image 3.1: All components included in the DEERC Spider RC Car Transform Robot package.

4. Setup

4.1. Charging the Toy Battery

1. Locate the rechargeable Lithium Ion battery and the USB charging cable.
2. Qabbad il-batterija mal-kejbil tal-iċċarġjar tal-USB.
3. Ipplaggja t-tarf tal-USB tal-kejbil ma' adapter tal-enerġija USB standard (mhux inkluż) jew ma' port USB tal-kompjuter.
4. The indicator light on the USB cable will illuminate during charging and turn off or change color when fully charged.
5. L-iċċarġjar tipikament jieħu madwar 60-90 minuta. Tiċċarġjax iżżejjed.

4.2. Installing the Toy Battery

1. Using the provided screwdriver, open the battery compartment on the underside of the toy.
2. Carefully insert the fully charged battery into the compartment, ensuring correct polarity.
3. Agħlaq il-kompartiment tal-batterija u waħħalha bil-kamin.

4.3. Installazzjoni ta 'batteriji tal-kontroll mill-bogħod

1. Iftaħ il-kompartiment tal-batterija fuq wara tal-kontroll remot.
2. Insert two 1.5V 'AA' batteries (not included), observing the correct polarity (+/-).
3. Agħlaq il-kompartiment tal-batterija sew.

4.4. Tqabbil tal-Kontroll mill-bogħod

1. Ensure the toy's battery is installed and the toy is powered off.
2. Ixgħel il-kontroll remot. Id-dawl indikatur fuq il-kontroll remot se jteptep.
3. Turn on the toy. The toy's indicator light will also flash.
4. Within a few seconds, both indicator lights should become solid, indicating successful pairing. If pairing fails, turn off both devices and repeat the process.

5. Istruzzjonijiet Operattivi

Familiarize yourself with the remote control functions before operating the toy.

5.1. Basic Movement

• Quddiem: Imbotta l-joystick tax-xellug 'il quddiem.
• B'lura: Iġbed il-joystick tax-xellug lura.
• Dawwar ix-Xellug: Imbotta l-joystick tal-lemin lejn ix-xellug.
• Dawwar Lemin: Imbotta l-joystick tal-lemin lejn il-lemin.

5.2. One-Key Transformation

Press the dedicated transformation button on the remote control to switch between car mode and robot mode. The toy will automatically perform the transformation sequence.

Image 5.1: Visual representation of the one-key transformation feature.

5.3. 360° Rotation

In either car or robot mode, use specific joystick combinations (refer to remote control diagram if available) or a dedicated button to initiate a 360-degree spin. This feature allows for dynamic maneuvers.

Image 5.2: The robot performing a 360-degree rotation.

5.4. Modalità Awtomatika

Press the 'Auto Mode' button on the remote control to activate an automatic demonstration sequence. The toy will showcase its transformation and movement capabilities independently.

5.5. Dwal LED

The toy features integrated LED lights that illuminate during operation and transformation, enhancing the visual experience.

6. Manutenzjoni

6.1. Tindif

• Wipe the toy with a soft, dry cloth to remove dust and dirt.
• Do not use water or chemical cleaners, as this can damage electronic components.

6.2. Ħażna

• When not in use for extended periods, remove batteries from both the toy and the remote control.
• Store the toy and remote in a cool, dry place, away from direct sunlight and extreme temperatures.

6.3. Material Durability

The toy is constructed from durable ABS plastic and features robust rubber tires designed for longevity and smooth transformation.

Image 6.1: Details of the toy's durable ABS material and rubber wheels.

7 Issolvi l-problemi

If you encounter issues with your DEERC Spider RC Car Transform Robot, refer to the following common problems and solutions:

8. Speċifikazzjonijiet

• Dimensjonijiet tal-Prodott: 9.05 x 3.74 x 2.36 pulzieri
• Piż tal-oġġett: 14.6 uqija
• ASIN: B0D9M3W6GL
• Età Rakkomandata mill-Manifattur: 8 snin 'il fuq
• Batteriji: 1 Lithium Ion battery (included) for toy, 2 AA batteries (not included) for remote.
• Frekwenza tal-Kontroll: 2.4GHz
• Manifattur: DEERC

9. Garanzija u Appoġġ

DEERC products are designed for quality and performance. For any questions, technical assistance, or warranty claims, please contact DEERC customer support. Refer to the product packaging or the official DEERC webis-sit għall-aktar informazzjoni ta' kuntatt aġġornata.

Jekk jogħġbok żomm il-prova tax-xiri tiegħek għal skopijiet ta' garanzija.