Kingston Brass KX1038BD Restoration Hand Shower Kit

1. Introduzzjoni

Thank you for choosing the Kingston Brass KX1038BD Restoration Hand Shower Kit. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new hand shower kit. Please read this manual thoroughly before installation and retain it for future reference.

2. Informazzjoni dwar is-Sigurtà

• Dejjem itfi l-provvista prinċipali tal-ilma qabel tibda kwalunkwe installazzjoni jew manutenzjoni.
• Ilbes tagħmir protettiv personali xieraq, bħal nuċċalijiet tas-sigurtà, waqt l-installazzjoni.
• Ensure all connections are secure to prevent leaks. Do not overtighten.
• Jekk m'intix ċert dwar xi parti tal-proċess tal-installazzjoni, ikkonsulta plamer kwalifikat.

3. Kontenut tal-Pakkett

Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni:

• Hand Shower (Full spray pattern)
• 59-inch (150 cm) Hose
• Shower Arm Diverter
• Adjustable Wall Bracket (Brass construction)

Figura 1: Sploda view of the Kingston Brass KX1038BD Hand Shower Kit components. This diagram illustrates the individual parts included in the package, such as the hand shower head, flexible hose, shower arm diverter, and the wall-mounted bracket.

4. Setup u Installazzjoni

The Kingston Brass KX1038BD Hand Shower Kit is designed for easy installation without the need for a plumber. Follow these steps:

1. Ipprepara ż-Żona: Turn off the main water supply to your shower. Remove your existing showerhead from the shower arm. Clean any old sealant or debris from the shower arm threads.
2. Install Shower Arm Diverter: Apply plumber's tape to the threads of your existing shower arm. Thread the shower arm diverter onto the shower arm and tighten by hand. Use a wrench to tighten an additional 1/4 to 1/2 turn, ensuring the diverter outlet faces downwards or in the desired direction. Do not overtighten.
3. Qabbad il-Pajp tad-Doċċa tal-Idejn: Connect one end of the 59-inch hose to the outlet on the shower arm diverter. Ensure the washer is properly seated inside the hose connection. Hand tighten, then use a wrench for a final snug turn.
4. Attach Hand Shower: Connect the other end of the hose to the hand shower. Ensure the washer is properly seated. Hand tighten, then use a wrench for a final snug turn.
5. Mount Wall Bracket: Choose a suitable location on your shower wall for the adjustable wall bracket. Mark the drilling points. Drill pilot holes and secure the wall bracket using appropriate mounting hardware (not included, typically requires screws and anchors suitable for your wall type). The bracket allows you to use the hand shower as a secondary showerhead.
6. Test għal Tnixxijiet: Turn the main water supply back on. Check all connections for leaks. If leaks occur, tighten the connections slightly.

Figura 2: The Kingston Brass KX1038BD Hand Shower Kit in its assembled state. This image displays the brushed nickel hand shower, the flexible hose, and the shower arm diverter, illustrating the product's aesthetic and primary components.

5. Istruzzjonijiet Operattivi

Using your Kingston Brass Hand Shower Kit is straightforward:

• Kontroll tal-Fluss tal-Ilma: Use your existing shower valve to turn the water on and off and to adjust water temperature.
• Diverter Operation: The shower arm diverter allows you to switch water flow between your main showerhead (if applicable) and the hand shower. Simply turn the knob or lever on the diverter to select your desired water outlet.
• Hand Shower Use: The hand shower provides a full spray pattern. Hold the hand shower for targeted rinsing or place it in the adjustable wall bracket for a fixed shower experience.

6. Manutenzjoni

Proper care will ensure the longevity and appearance of your hand shower kit:

• Tindif: Naddaf il-finitura tan-nikil brushed regolarment b'ċarruta ratba u damp drapp. Evita prodotti tat-tindif li joborxu, kimiċi ħarxa, jew spondi tal-għorik, għax dawn jistgħu jagħmlu ħsara lill-finitura.
• Depożiti minerali: If mineral deposits accumulate on the hand shower nozzles, gently rub them with your finger or a soft brush to dislodge them. For stubborn deposits, a solution of white vinegar and water can be used, but ensure to rinse thoroughly afterward.
• Reżistenza għall-korrużjoni: The brass construction and brushed nickel finish are designed to be corrosion resistant, providing durability and maintaining aesthetic appeal over time.

7 Issolvi l-problemi

Jekk tiltaqa' ma' xi problemi, irreferi għall-problemi u s-soluzzjonijiet komuni li ġejjin:

• Pressjoni Baxxa tal-Ilma:
  • Iċċekkja jekk il-valv prinċipali tal-provvista tal-ilma huwiex miftuħ għalkollox.
  • Inspect the hand shower nozzles for mineral buildup and clean if necessary.
  • Kun żgur li l-pajp mhux mibrum jew imblukkat.
• Tnixxijiet fil-Konnessjonijiet:
  • Itfi l-provvista tal-ilma.
  • Ensure plumber's tape was applied correctly to threaded connections.
  • Gently tighten connections with a wrench, being careful not to overtighten.
  • Check that all rubber washers are properly seated and not damaged. Replace if necessary.
• Id-Deviter Mhux Qed Jaqleb Sewwa:
  • Ensure the diverter handle is fully turned to the desired position.
  • Check for any obstructions or debris within the diverter mechanism.

8. Speċifikazzjonijiet

Figura 3: Detailed dimensional drawing of the Kingston Brass KX1038BD Hand Shower Kit. This illustration provides precise measurements for the hand shower head (7-15/16 inches), hose length (59 inches), and other critical components, aiding in installation planning.

9. Garanzija u Appoġġ

Kingston Brass products are manufactured to high-quality standards and are backed by a manufacturer's warranty. For specific warranty details, please refer to the warranty card included with your product or visit the official Kingston Brass website. For technical support, replacement parts, or any questions not covered in this manual, please contact Kingston Brass customer service.

Informazzjoni ta' Kuntatt: Please refer to the Kingston Brass official webis-sit jew id-dokumentazzjoni tax-xiri tiegħek għall-aktar dettalji ta' kuntatt tas-servizz tal-konsumatur aġġornati.