1. Prodott Aktarview
The UGREEN Magsafe Car Mount (Model 45577) is designed to securely hold your smartphone on your car's dashboard, providing convenient access to navigation and media while driving. It features a strong magnetic grip, flexible adjustment options, and broad compatibility with MagSafe-enabled devices and other smartphones using a metal ring.
Image: The UGREEN Magsafe Car Mount demonstrating its multi-angle adjustment capabilities, including 180-degree arm rotation and 360-degree base rotation.
2. Istruzzjonijiet ta' Setup
2.1 Għażla ta' Post ta' Immuntar
Select a flat, clean area on your car's dashboard that does not obstruct your view or interfere with airbags or other vehicle controls. Ensure the surface is suitable for adhesive application.
2.2 Surface Preparation and Mount Application
- Clean the chosen dashboard surface thoroughly with a wet wipe and allow it to dry completely for 5 seconds.
- Peel off the protective film from the 3M adhesive pad on the base of the car mount.
- Firmly press the mount onto the cleaned dashboard surface for at least 10 seconds to ensure strong adhesion.
- Allow the adhesive to cure for a minimum of 5 hours before attaching your phone or adjusting the mount. This ensures optimal adhesion and prevents the mount from detaching.
Image: Visual guide demonstrating the four steps for installing the car mount: cleaning the dashboard, peeling the adhesive, pressing the base, and waiting for curing.
2.3 Kompatibilità tat-Telefon
- Użu Dirett: The car mount is directly compatible with iPhone 12 series and later models (including iPhone 17, 16, 15, 14, 13) and official MagSafe cases.
- With Metal Ring: For iPhone 11 and earlier models, Android devices, or non-MagSafe cases, an extra metal ring must be attached to the back of your phone or case to enable magnetic attachment.
Image: Illustration showing direct compatibility with iPhone 12-17 series and MagSafe cases, and the requirement for a metal ring for other Android phones and older iPhone models.
Video: Demonstrates the installation process, angle adjustment, and phone attachment for various iPhone models and MagSafe cases. Also shows the use of a metal ring for other phones.
3. Istruzzjonijiet Operattivi
3.1 L-aġġustament tal- ViewIng Angolu
The car mount features a 360-degree rotating base and a 180-degree adjustable aluminum alloy arm. This allows you to position your smartphone vertically or horizontally and adjust the viewing angle for optimal visibility and comfort while driving.
Image: The car mount installed on a dashboard, illustrating various possible phone orientations and angles for universal mounting.
3.2 Kif Twaħħal it-Telefon Tiegħek
Simply bring your MagSafe-compatible phone (or a phone with an attached metal ring) close to the magnetic surface of the mount. The strong N52 neodymium magnets will securely hold your phone in place, allowing for quick, one-handed attachment and removal.
Image: A hand quickly attaching a smartphone to the magnetic car mount, highlighting the ease of use.
Image: Diagram illustrating the strong 22N magnetic power and N52 magnets used in the car mount, ensuring the phone remains securely attached.
Video: Shows the car mount in action, demonstrating its strong magnetic hold and flexible adjustment while driving, ensuring the phone stays secure.
4. Manutenzjoni u Kura
- Keep the magnetic surface clean and free from dust or debris to ensure optimal magnetic grip.
- Imsaħ il-muntatura b'ċarruta ratba, damp drapp kif meħtieġ. Evita kimiċi ħarxa jew prodotti tat-tindif li joborxu.
- The 3M adhesive is not suitable for surfaces such as leather, suede, or oiled fabrics. Applying the mount to these surfaces may cause damage or result in poor adhesion.
5 Issolvi l-problemi
5.1 Mount not sticking securely to the dashboard.
- Soluzzjoni: Ensure the dashboard surface was thoroughly cleaned and dried before application. The 3M adhesive requires a clean, flat, and dry surface for optimal bonding.
- Soluzzjoni: Allow the adhesive to cure for at least 5 hours after initial application before placing any weight on the mount or adjusting it. This allows the adhesive to form a strong bond.
- Soluzzjoni: Verify that the dashboard surface is not leather, suede, or oiled fabric, as the 3M adhesive is not designed for these materials and may not adhere properly.
5.2 Phone is not holding firmly or falls off.
- Soluzzjoni: Confirm that your phone or phone case is MagSafe compatible. If not, ensure the metal ring is correctly and securely attached to the back of your phone or case.
- Soluzzjoni: Check for any obstructions (e.g., thick phone cases without MagSafe, pop sockets, or other accessories) between the phone and the mount that might weaken the magnetic connection.
- Soluzzjoni: Ensure the metal ring (if used) is centered correctly on your phone or case to align with the mount's magnets.
6. Speċifikazzjonijiet tal-Prodott
| Karatteristika | Speċifikazzjoni |
|---|---|
| Numru tal-Mudell | 45577 |
| Tip ta 'Immuntar | Dashboard Adhesive |
| Rotazzjoni | 360° Rotating Base, 180° Adjustable Arm |
| Forza manjetika | Strong N52 Neodymium Magnets |
| Apparati Kompatibbli | Smartphones (iPhone 12 series and later directly; others with metal ring) |
| Piż tal-oġġett | 5 uqija |
| Dimensjonijiet tal-Pakkett | 3.78 x 2.64 x 2.05 pulzieri |
Image: Diagram showing the key dimensions of the UGREEN Magsafe Car Mount in inches.
7. Garanzija u Appoġġ
For warranty information, technical support, or any product-related inquiries, please contact UGREEN customer service through the official UGREEN website or your purchase platform. Please have your product model number (45577) and purchase details ready when contacting support.
