Pawfly Aquarium LED Light AL2510 Instruction Manual

1. Prodott Aktarview

The Pawfly Aquarium LED Light AL2510 is an extendable full-spectrum lighting solution designed for 12 to 18-inch fish tanks. It features brilliant white, blue, and red lights, offering both daytime and night modes with adjustable brightness and an auto on/off timer function to create a natural environment for your aquatic life.

Image: Pawfly Aquarium LED Light showing its extendable design, dimensions, and light specifications (LUX: 2500, PAR: 55, CRI: 90, Power: 11W).

2. Istruzzjonijiet ta' Setup

2.1 Immuntar tad-Dawl

The Pawfly Aquarium LED Light comes with extendable brackets for easy installation on various tank sizes. The brackets allow the light to fit tanks from 12 inches (minimum length 11.5 inches) up to 18 inches (maximum length 20 inches).

1. Attach the sturdy metal brackets to each end of the LED light fixture.
2. Place the light fixture on top of your aquarium, ensuring the brackets rest securely on the tank's edges.
3. Adjust the extendable brackets to fit your tank's length, ensuring the light is centered and stable.

Image: Close-up of the sturdy metal bracket attached to the Pawfly Aquarium LED Light, demonstrating its telescopic, detachable, and heavy-duty features for stable support.

2.2 Konnessjoni tal-Enerġija

Connect the DC adapter to the light fixture and then plug it into a power outlet. Ensure all connections are secure before powering on.

2.3 Gwida bil-Vidjo tas-Setup

3. Istruzzjonijiet Operattivi

3.1 Kontrollur Overview

The light is controlled via an inline controller with several buttons:

• Buttuna M: Short press to turn on all lights or switch between daytime and night modes. Long press (3 seconds) to turn all lights off.
• Buttuna D: In Daytime Mode, controls the brightness of white and red lights.
• N Button: In Daytime Mode, controls the brightness of blue light. In Night Mode, adjusts the luminance of blue light.
• Buttuna tat-Tajmer: Sets the auto on/off duration (8h, 10h, 12h).

Image: The inline controller for the Pawfly Aquarium LED Light, illustrating the Auto On/Off timer function with 8H, 10H, and 12H settings, which operate within the first specified hours of a 24-hour period.

3.2 Modi tad-Dawl

The light offers two primary modes: Daytime Mode and Night Mode, simulating natural sunrise and sunset cycles.

• Daytime Mode: All lights (white, blue, red) are on. Use the D and N buttons to adjust brightness.
• Modalità bil-lejl: Only blue lights are on. Use the N button to adjust brightness.

Image: Visual representation of the Pawfly Aquarium LED Light's 2 Lighting Modes, showing a vibrant daytime scene and a calming blue night scene, switched by a short press of the M button.

3.3 Kontroll tal-Luminożità

The light features 6 intensity levels for precise brightness adjustment.

• In Daytime Mode, press the buttuna D to control white and red light brightness. Press the N button to control blue light brightness.
• In Night Mode, press the N button to adjust the blue light luminance.

Image: Demonstrates the 6 Levels of Light Intensity for both Night Mode (blue light only, adjusted by N button) and Daytime Mode (all lights, white/red by D button, blue by N button).

3.4 Auto On/Off Timer

The built-in timer allows you to set automatic lighting durations:

• Press the Timer button to cycle through 8h, 10h, and 12h options.
• The selected duration will only work within the first specified hours of a 24-hour period.

3.5 Full Spectrum Details

The light incorporates 6500 K white light, 450 nm blue light, and 660 nm red light, providing a full spectrum with LUX: 2500, PAR: 55, and CRI: 90. This spectrum is designed to reproduce natural colors and support aquatic life.

Image: Illustrates the full spectrum capabilities of the Pawfly Aquarium LED Light, showing spectral waveband and CIE Chromaticity Diagram, with white (6500K), red (660nm), and blue (450nm) light components.

3.6 Gwida bil-Vidjo dwar l-Operazzjoni

4. Manutenzjoni

4.1 Tindif

Regularly wipe the light fixture with a soft, damp cloth to remove any water spots or debris. Ensure the light is unplugged before cleaning.

4.2 Reżistenza għall-Ilma

The light is rated IP67 waterproof, meaning it is protected against immersion in water up to 1 meter for up to 30 minutes. However, it is designed to resist water vapor and droplets, not for continuous submersion. Do not intentionally submerge the light in water.

4.3 Dissipazzjoni tas-Sħana

The light features a solid aluminum shell for fast heat dissipation, ensuring optimal performance and longevity.

Image: Highlights the IP67 waterproof rating of the Pawfly Aquarium LED Light, indicating its resistance to water vapor and droplets, and its solid aluminum shell for fast heat dissipation and impact resistance.

5 Issolvi l-problemi

If you encounter any issues with your Pawfly Aquarium LED Light, please refer to the following common solutions:

• Id-dawl ma jixgħelx: Ensure the power adapter is securely connected to both the light fixture and the power outlet. Check if the power outlet is functional.
• Timer not working correctly: Verify that the timer is set according to the instructions in Section 3.4. Ensure the current time is correctly set on the controller if applicable (some controllers require initial time setting).
• Dwal li jteptep: Check for loose connections. If flickering persists, contact customer support.
• Brightness issues: Ensure you are using the correct D or N button for the desired light color and mode as described in Section 3.3.

6. Speċifikazzjonijiet

7. Garanzija u Appoġġ

For warranty information and customer support, please refer to the product packaging or contact Pawfly customer service directly. Keep your purchase receipt for warranty claims.