1. Introduzzjoni
This manual provides essential information for the proper use, setup, operation, and maintenance of your Scubapro R105 Second Stage Regulator. The R105 is designed for reliability and ease of use, making it suitable for various diving applications. Adhering to the guidelines in this manual will help ensure the longevity and optimal performance of your regulator.
2. Komponenti Inklużi
The Scubapro R105 package includes the following:
- Scubapro R105 Second Stage Regolatur
- Low-Pressure (LP) Hose
3. Setup
Proper setup of your R105 regulator is crucial for safe diving.
- Connecting to First Stage: Attach the low-pressure hose of the R105 second stage to an available low-pressure port on your first stage regulator. Ensure the connection is secure and hand-tightened. Do not overtighten.
- Rottaġġ tal-Pajp: Route the hose comfortably to allow for natural head movement and easy access to the mouthpiece. The R105's design allows for hose orientation to either the left or right side, accommodating diver preference.
- Kontroll ta' Qabel l-Għadsa: Before diving, pressurize the system and perform a functional check. Breathe from the second stage to ensure smooth airflow. Check for any air leaks.
Figura 3.1: Quddiem view of the Scubapro R105 Regulator, showing the mouthpiece and the connection point for the low-pressure hose. This image illustrates the general form factor of the second stage.
4. Istruzzjonijiet Operattivi
The R105 regulator is designed for straightforward operation.
- VIVA Control Knob: The R105 features a dive/pre-dive (Venturi Initiated Vacuum Assist) control knob.
- Pożizzjoni ta' Qabel l-Għadsa: Set the knob to the "Pre-Dive" position (often indicated by a 'PRE' or similar marking) before entering the water or when the regulator is not in use. This setting helps prevent free flow on the surface, especially when facing into a current or during entry.
- Pożizzjoni tal-Għadsa: Once submerged and ready to breathe, rotate the knob to the "Dive" position (often indicated by a 'DIVE' or similar marking). This optimizes airflow for smooth and effortless breathing underwater.
- Buttuna tat-tindif: The soft, molded purge button is located on the front cover of the regulator. Pressing this button allows for a burst of air to clear water from the mouthpiece or to test airflow.
- Breathing Underwater: Breathe naturally and calmly through the mouthpiece. The R105's downstream valve design ensures consistent and reliable airflow.
Figura 4.1: Fuq view of the Scubapro R105 Regulator, highlighting the R105 model designation and the dive/pre-dive control knob. This view helps identify key operational features.
5. Manutenzjoni
Regular maintenance extends the life of your Scubapro R105 regulator and ensures its safe operation.
- Tlaħliħ: After each dive, thoroughly rinse the regulator with fresh, clean water. Ensure the dust cap is securely in place on the first stage (if connected) to prevent water from entering. Do not press the purge button while rinsing unless the regulator is pressurized.
- Tnixxif: Allow the regulator to air dry completely in a cool, shaded area away from direct sunlight.
- Ħażna: Store your regulator in a clean, dry place, protected from extreme temperatures, chemicals, and direct sunlight. Avoid kinking hoses during storage.
- Servizzi Professjonali: Your regulator requires periodic professional servicing by an authorized Scubapro technician. Refer to your Scubapro dealer for recommended service intervals, typically annually or after a certain number of dives, whichever comes first. This ensures all internal components are inspected, cleaned, and replaced as necessary.
- Spezzjoni: Before each dive, visually inspect the regulator for any signs of damage, wear, or corrosion on the hose, mouthpiece, and casing.
6 Issolvi l-problemi
This section addresses common issues you might encounter with your R105 regulator. For problems not listed here, or if solutions do not resolve the issue, contact an authorized Scubapro service center.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Free Flowing Regulator |
|
|
| Hard Breathing / Restricted Airflow |
|
|
| Air Leak from Mouthpiece Area |
|
|
7. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Isem tal-Mudell | Scubapro R105 Regulator, Second Stage Biss |
| Numru tal-Parti | 11.332.000 |
| Tip | It-tieni Stage Regolatur |
| Valve Design | Classic Downstream Valve |
| Kontroll Venturi | Dive/Pre-Dive (VIVA) Control Knob |
| Buttuna tat-tindif | Soft, Molded |
| Hose Orientation | Adaptable (Left or Right) |
| Komponenti Inklużi | R105 2nd Stage Regulator, LP Hose |
| Kulur | Black and blue |
| Dimensjonijiet tal-oġġett (LxWxH) | 9 x 9 x 0.5 pulzieri |
| Piż tal-Pakkett | 0.58 Kilogrammi |
8. Garanzija u Appoġġ
Garanzija: The Scubapro R105 Regulator is covered by a Manufacturer's Lifetime Limited Warranty. Please retain your proof of purchase for warranty claims. For full details regarding warranty terms and conditions, refer to the official Scubapro warranty documentation or contact an authorized Scubapro dealer.
Appoġġ: For technical assistance, spare parts, or professional servicing, please contact your authorized Scubapro dealer or visit the official Scubapro website for contact information. Regular servicing by certified technicians is essential to maintain the regulator's performance and warranty validity.
