UIBI X3 & X7 Jump Starter with Air Compressor User Manual

1. Introduzzjoni

Thank you for choosing the UIBI X3 or X7 Jump Starter with Air Compressor. This versatile device combines a powerful jump starter, a high-performance tire inflator, a portable power bank, and an emergency LED light. Designed for convenience and safety, it is an essential tool for any vehicle owner, providing reliable assistance for dead batteries, flat tires, and charging needs on the go.

This manual will guide you through the proper use, maintenance, and troubleshooting of your UIBI jump starter. Please read it thoroughly before first use to ensure safe and optimal performance.

2. Informazzjoni dwar is-Sigurtà

Dejjem osserva l-prekawzjonijiet ta' sigurtà li ġejjin biex tevita korriment jew ħsara lill-apparat u lill-vettura tiegħek.

• Aqra l-Istruzzjonijiet Kollha: Before operating the jump starter, read and understand all safety information and operating instructions.
• Protezzjoni tal-għajnejn: Dejjem ilbes nuċċalijiet tas-sigurtà meta taħdem bil-batteriji.
• Ventilazzjoni: Ensure adequate ventilation when jump starting a vehicle.
• Prevenzjoni tax-Xrar: Avoid creating sparks near the battery. Do not smoke or allow open flames near the battery or jump starter.
• Polarità: Qabbad il-clamps with correct polarity. Connecting incorrectly can cause damage to the device, battery, or vehicle.
• Tfal u Pets: Żomm l-apparat fejn ma jintlaħaqx mit-tfal u l-annimali domestiċi.
• Ħażna: Aħżen l-apparat f'post frisk u niexef 'il bogħod mix-xemx diretta u minn temperaturi estremi.
• Damaged Device: Do not use the device if it is damaged, cracked, or leaking.
• Iċċarġjar: Only charge the device using the provided charging cable and a compatible adapter.
• Espożizzjoni għall-Ilma: Tesponix l-apparat għal xita jew kundizzjonijiet imxarrba.

3. Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett tiegħek:

• UIBI X3 or X7 Jump Starter
• Kejbils Jumper Smart
• Air Hose with Nozzles (for various inflatables)
• Cable tal-Iċċarġjar tal-USB-C
• Kawża tal-Ħażna
• Manwal għall-Utent

Figura 3.1: UIBI X3 and X7 Jump Starters shown with all included accessories, including smart jumper cables, air hose, various nozzles, and charging cables, neatly organized in their storage cases.

4. Prodott Aktarview

Familiarize yourself with the components of your UIBI jump starter.

Figura 4.1: The UIBI X3 model, highlighting its digital display for battery level and pressure, and the control buttons for jump start, air compressor, and LED light functions.

Figura 4.2: The UIBI X7 model, featuring its larger digital display for real-time pressure and battery status, along with intuitive control buttons for various modes.

Komponenti Ewlenin:

• Wirja Diġitali: Shows battery level, air pressure (PSI, BAR, KPA, Kg/cm²), and operational modes.
• Buttuna tal-Qawwa: Ixgħel/itfi l-apparat.
• Buttuna tal-Modalità (M): Switches between air compressor modes (e.g., car, motorcycle, bicycle, ball).
• Buttuni +/-: Adjusts target air pressure.
• Port tal-Bidu tal-Qabża: For connecting smart jumper cables.
• Port tal-Pajp tal-Arja: For connecting the air hose.
• USB-A Output (QC3.0): Għall-iċċarġjar ta' apparati elettroniċi.
• Type-C PD45W Input/Output: For charging the jump starter and charging electronic devices.
• Flashlight LED: Provides illumination, strobe, and SOS signals.

5. Setup

Before first use, ensure the jump starter is fully charged.

5.1 Iċċarġjar inizjali

1. Connect the provided USB-C charging cable to the Type-C PD45W port on the jump starter.
2. Qabbad it-tarf l-ieħor tal-kejbil USB-C ma' adapter tal-ħajt USB kompatibbli (mhux inkluż).
3. The digital display will show the charging progress. Charge until the battery indicator shows full.

Figura 5.1: The UIBI X7 model highlighting its Type-C PD45W port, indicating its fast charging capability for both input and output.

A full charge typically takes approximately 2 hours with a PD45W charger.

6. Operating Instructions (Jump Starter)

Follow these steps to safely jump start your vehicle.

1. Ipprepara l-Vettura: Turn off the vehicle's ignition and all accessories (headlights, radio, A/C). Engage the parking brake.
2. Connect Jumper Cables to Jump Starter: Insert the blue plug of the smart jumper cables into the jump start port on the UIBI device. Ensure a firm connection.
3. Qabbad Clamps għall-Batterija:
   • Qabbad il- AĦMAR (+) clamp lill- pożittiv (+) terminal of the vehicle's battery.
   • Qabbad il- ISWED (-) clamp lill- negattiv (-) terminal of the vehicle's battery.

   The smart jumper cables will beep if an incorrect connection is detected. Correct the connection before proceeding.
4. Ibda l-Vettura: Ladarba l-clamps are correctly connected and the indicator on the smart cable is solid green (or as per cable indicator), start your vehicle's engine.
5. Neħħi Clamps: Once the vehicle starts, immediately remove the BLACK (-) clamp first, then the RED (+) clamp from the battery. Disconnect the smart jumper cables from the UIBI device.

Figura 6.1: The UIBI X7 Jump Starter connected to a car battery, demonstrating the proper setup for jump-starting a vehicle. The display shows '8.8.8' indicating readiness.

Figura 6.2: The UIBI X3 Jump Starter connected to a car battery, illustrating the connection of the smart clamps to the battery terminals for a quick and safe jump start.

Nota: Jekk il-vettura ma tixgħelx fl-ewwel tentattiv, stenna mill-inqas 30 sekonda qabel ma terġa' tipprova. Tippruvax aktar minn 3 starts konsekuttivi ta' jump starts.

7. Tħaddim tal-Kompressur tal-Arja

The UIBI jump starter features a built-in air compressor for inflating tires and other inflatables.

1. Qabbad il-Pajp tal-Arja: Screw the air hose into the air hose port on the jump starter.
2. Waħħal iż-żennuna: Select the appropriate nozzle for your item (e.g., Schrader valve for car tires, needle for balls) and attach it to the end of the air hose.
3. Qawwa Mixgħul: Press the Power button to turn on the device. The display will show the current pressure.
4. Agħżel il-Modalità (Mhux obbligatorju): Press the 'M' (Mode) button to cycle through preset inflation modes (e.g., car, motorcycle, bicycle, ball). Each mode has a default pressure, which can be adjusted.
5. Issettja l-Pressjoni Mira: Use the '+' and '-' buttons to set your desired pressure.
6. Ibda l-Inflazzjoni: Press the Power button again to start the air compressor. The display will show the real-time pressure.
7. Tifi awtomatiku: The compressor will automatically stop once the preset pressure is reached.
8. Skonnettja: Unscrew the air hose from the item and the jump starter.

Figura 7.1: The UIBI X7 Jump Starter actively inflating a car tire, demonstrating its cordless air compressor function. The display shows the current PSI reading.

Figura 7.2: The UIBI X3 Jump Starter in use, inflating a car tire. This image highlights the multi-use air pump feature with auto-stop functionality.

8. Funzjoni tal-Bank tal-Enerġija

The UIBI jump starter can charge your electronic devices.

1. Qabbad Apparat: Use a compatible USB cable (not included) to connect your smartphone, tablet, or other electronic device to either the USB-A (QC3.0) output port or the Type-C PD45W port on the jump starter.
2. Qawwa Mixgħul: Press the Power button on the jump starter to activate the charging function.
3. Iċċarġjar: Your device will begin charging. The jump starter's display may show its remaining battery level.

Figura 8.1: The UIBI X7 model highlighting its Type-C PD45W port, indicating its fast charging capability for both input and output, allowing it to function as a portable power bank.

9. Funzjoni tad-Dawl LED

The integrated LED flashlight offers three modes for various situations.

1. Ixgħel: Press and hold the LED light button (often integrated with the power button or a dedicated button) to turn on the flashlight.
2. Ibdel il-Modi: Briefly press the LED light button repeatedly to cycle through the modes:
   • Dawl Stabbli: Għal illuminazzjoni ġenerali.
   • Dawl Strobe: Għal sinjalar jew biex tiġbed l-attenzjoni.
   • Sinjal SOS: For emergency situations, emitting the Morse code SOS pattern.
3. Itfi: Press and hold the LED light button again to turn off the light.

Figura 9.1: The UIBI X7 Jump Starter demonstrating its emergency LED light, capable of providing stable illumination, strobe, and SOS signals for various situations.

10. Iċċarġjar tal-Apparat

To ensure your UIBI jump starter is always ready, recharge it after each use or when the battery level is low.

• Connect the provided USB-C charging cable to the Type-C PD45W input port on the jump starter.
• Connect the other end of the USB-C cable to a USB wall adapter (e.g., 5V/2A, 9V/2A, or PD45W compatible).
• The digital display will indicate the charging status. Charge until the battery icon shows full.
• It is recommended to fully charge the device every 3-6 months even if not in use to maintain battery health.

11. Manutenzjoni

Proper maintenance will extend the life of your UIBI jump starter.

• Tindif: Imsaħ l-apparat b'ċarruta ratba u niexfa. Tużax kimiċi ħarxa jew prodotti tat-tindif li joborxu.
• Ħażna: Store the device in its carrying case in a cool, dry place, away from direct sunlight, moisture, and extreme temperatures.
• Kura tal-batterija: Erġa' ċċarġja l-apparat kull 3-6 xhur biex tevita li jiskarga fil-fond u ttawwal il-ħajja tal-batterija.
• Spezzjoni tal-Cable: Regularly inspect the jumper cables and air hose for any signs of damage or wear. Replace if necessary.

12 Issolvi l-problemi

Jekk tiltaqa' ma' problemi, irreferi għall-problemi u s-soluzzjonijiet komuni li ġejjin.

Jekk il-problema tippersisti wara li tipprova dawn is-soluzzjonijiet, jekk jogħġbok ikkuntattja l-appoġġ għall-klijenti.

13. Speċifikazzjonijiet

14. Garanzija u Appoġġ

UIBI products are designed and manufactured to the highest quality standards. For warranty information and customer support, please refer to the warranty card included in your package or visit the official UIBI website. If you have any questions or require assistance, do not hesitate to contact our customer service team.