GAMDIAS AURA GC2 E WH A ATX Mid Tower PC Case User Manual

Introduzzjoni

This manual provides comprehensive instructions for the installation, operation, and maintenance of your GAMDIAS AURA GC2 E WH A ATX Mid Tower PC Case. Please read this manual thoroughly before beginning installation to ensure proper setup and optimal performance.

Immaġni: Quddiem-xellug view of the GAMDIAS AURA GC2 E WH A ATX Mid Tower PC Case, showcasing the perforated front panel with ARGB fans and the tempered glass side panel.

Setup u Installazzjoni

Follow these steps to properly set up your GAMDIAS AURA GC2 E WH A PC case and install components.

1. Tħejjija tal-Każ

• Iftaħ il-kaxxa tal-PC mill-pakkett u neħħi l-materjali kollha tal-ippakkjar.
• Poġġi l-kaxxa fuq wiċċ stabbli u ċatt.
• Remove the tempered glass side panel by unscrewing the thumb screws, typically located at the rear of the panel. Carefully lift and set aside the panel on a soft, non-abrasive surface to prevent scratches.
• Access the interior for component installation.

Image: Illustration showing the removal of the tempered glass side panel for tool-free access to the case interior.

2. Installazzjoni tal-Motherboard

• Kun żgur li l-istandoffs korretti huma installati għall-fattur tal-forma tal-motherboard tiegħek (ATX, Micro-ATX, Mini-ITX).
• Carefully align your motherboard with the standoffs and the I/O shield opening at the rear of the case.
• Sikura l-motherboard bil-viti.

3. Installazzjoni tal-Unità tal-Provvista tal-Enerġija (PSU)

• Install the PSU into the dedicated shroud area at the bottom of the case.
• Waħħal il-PSU bil-viti minn wara tal-kaxxa.
• Għaddi l-kejbils meħtieġa mill-qtugħ tal-immaniġġjar tal-kejbils.

4. Installazzjoni tad-Drajv tal-Ħażna

• The case supports 2 x 3.5" drives (or 1 x 2.5" + 1 x 3.5" in the HDD cage) and 2 x 2.5" drives on dedicated trays.
• Mount your SSDs/HDDs into the appropriate bays or trays and secure them.

5. Installazzjoni tal-Unità tal-Ipproċessar tal-Grafika (GPU)

• Neħħi l-għata meħtieġa tas-slott tal-PCIe minn wara l-kaxxa.
• Insert your GPU into the PCIe slot on the motherboard and secure it with a screw.
• Il-kaxxa tappoġġja GPUs sa 340mm fit-tul.

Image: Diagram illustrating the compact mid-tower case dimensions (195mm width, 395mm depth, 450mm height) and GPU length support up to 340mm, along with the PSU shroud design.

Image: Visual representation of component clearance limits: CPU Cooler up to 160mm, GPU up to 340mm, and PSU up to 160mm.

6. Konfigurazzjoni tas-Sistema tat-Tkessiħ

• The case comes with four pre-installed 120mm ARGB fans.
• Additional fan support: The case supports up to six 120mm fans.
• Radiator support: A 360mm AIO/radiator can be installed in the front.
• Ensure all fan cables are connected to the appropriate headers on your motherboard or the included fan controller.

Image: Diagram detailing cooling support: 2x 120mm fans at the top, 1x 120mm fan at the rear, and 3x 120mm or 2x 140mm fans or a 360mm radiator at the front.

Immaġni: Close-up view of the chamfered white perforated front panel, highlighting the pre-installed ARGB fans designed for superior air intake.

7. Konnessjonijiet tal-Panel I/O ta' Quddiem

• Connect the front panel cables (USB 3.0, USB 2.0, HD Audio, Power Switch, Reset Switch, LED Control) to the corresponding headers on your motherboard.

Image: Detail of the top-front I/O panel, featuring 2x USB 2.0 ports, 1x USB 3.0 port, a reset button, and HD audio connectivity.

8. Ġestjoni tal-Kejbil

• Utilize the space behind the motherboard tray and the PSU shroud to route and tie down cables for a clean build and improved airflow.

9. Assemblea Finali

• Once all components are installed and cables are managed, reattach the tempered glass side panel.
• Kun żgur li l-viti kollha huma ssikkati sew.

Istruzzjonijiet Operattivi

After successful assembly, your GAMDIAS AURA GC2 E WH A PC case is ready for operation.

• Qawwa Mixgħul: Press the power button located on the top I/O panel to start your computer.
• ARGB Fan Control: The pre-installed ARGB fans can be controlled via the dedicated LED control button on the top I/O panel, or through compatible motherboard software if connected to an ARGB header. Note that the fans are fixed RGB and may not be controllable via standard 4-pin RGB headers.
• Portijiet USB: Use the USB 3.0 and USB 2.0 ports on the top panel for connecting peripherals and external devices.
• Ġakki tal-Awdjo: Connect your headphones and microphone to the HD Audio jacks on the top panel.

Manutenzjoni

Manutenzjoni regolari tgħin biex tiżgura prestazzjoni ottimali u lonġevità tal-kaxxa tal-PC tiegħek.

• Tindif tat-Trab: Periodically clean dust from the perforated front panel and any other intake areas. A soft brush or compressed air can be used.
• Tindif ta 'ġewwa: With the system powered off and unplugged, carefully remove the side panel and use compressed air to clean dust from internal components and fans.
• Ħġieġ ittemprat: Clean the tempered glass panel with a soft, lint-free cloth and a non-abrasive glass cleaner. Avoid harsh chemicals.

Issolvi l-problemi

If you encounter issues with your PC case, refer to the following common troubleshooting tips:

• Fannijiet Mhux Iduru:
  • Check if the fan power cables are securely connected to the PSU (SATA power) or motherboard headers.
  • Ensure the fan controller (if applicable) is receiving power.
• ARGB Lights Not Working/Incorrect Color:
  • Verify that the ARGB cables are correctly connected to the motherboard's ARGB header or the case's LED control button.
  • Use the LED control button on the top I/O panel to cycle through lighting modes.
  • If connected to a motherboard, ensure the motherboard's RGB software is installed and configured correctly.
• Front USB Ports Not Functioning:
  • Confirm that the USB 3.0 and USB 2.0 headers from the case are properly connected to the corresponding headers on your motherboard.
• Front Audio Jacks Not Functioning:
  • Ensure the HD Audio cable from the case is correctly plugged into the audio header on your motherboard.
  • Check your operating system's audio settings and drivers.

Speċifikazzjonijiet

Detailed specifications for the GAMDIAS AURA GC2 E WH A ATX Mid Tower PC Case:

Informazzjoni dwar Garanzija

Specific warranty details for the GAMDIAS AURA GC2 E WH A PC Case are typically provided with the product packaging or on the official GAMDIAS websit. Jekk jogħġbok irreferi għal dawk ir-riżorsi għall-aktar termini u kundizzjonijiet preċiżi u aġġornati tal-garanzija.

Appoġġ għall-Klijent

For technical assistance, troubleshooting beyond this manual, or inquiries regarding your GAMDIAS AURA GC2 E WH A PC Case, please visit the official GAMDIAS website or contact their customer support channels. Contact information is usually available on the product packaging or the company's websit.

You can visit the GAMDIAS Store on Amazon for more information: GAMDIAS Store