1. Introduzzjoni
Thank you for choosing the ROBOTIME 3D Wooden Pink Rose DIY Craft Kit. This kit provides a unique and engaging experience to construct a beautiful, lasting wooden flower. Designed for adults, this manual will guide you through each step of the assembly process, ensuring a rewarding outcome. Once completed, your wooden pink rose will serve as an elegant decorative piece for any space.
Figure 1.1: The ROBOTIME 3D Wooden Pink Rose kit and assembled model.
2. Informazzjoni dwar is-Sigurtà
- Not for children under 3 years: Dan il-prodott fih partijiet żgħar li jistgħu joħolqu periklu ta’ fgar.
- Exercise caution when handling laser-cut wooden pieces, as some edges may be sharp.
- Keep all components away from open flames and excessive heat.
- Do not ingest any parts of the kit.
3. Lista tal-Komponenti
Before beginning assembly, please verify that all components are present and undamaged. The kit includes:
- Laser-cut wooden sheets containing various parts for the flower, stem, leaves, and pot.
- Detailed instruction book with visual guides.
- Small decorative elements (e.g., 'for you' card, small flowers).
Figura 3.1: Aktarview tal-komponenti inklużi.
4. Setup u Assemblea
The ROBOTIME Pink Rose kit features an interlocking mortise-and-tenon design, requiring no glue for assembly. Follow the steps below and refer to the included instruction book for detailed diagrams. The estimated assembly time is approximately 30 minutes.
- Prepare the Pieces: Carefully detach all wooden pieces from their sheets. Use a small tool or your fingers to gently push them out. Organize similar pieces together to streamline the assembly process.
- Assemble the Flower Head: Begin by interlocking the petals according to the instruction book. Pay attention to the numbering or shape indicators on each piece.
- Construct the Stem and Leaves: Connect the stem segments and attach the leaves at their designated points. Ensure a secure fit for stability.
- Build the Pot: Assemble the wooden pot pieces, forming the base for your rose.
- Combine Components: Insert the assembled flower and stem into the pot. Add any small decorative elements, such as the 'for you' card or small flowers, into the pot base.
Video 4.1: General assembly overview for ROBOTIME 3D Wooden Bloom Craft Kits.
Video 4.2: Detailed assembly process for a ROBOTIME 3D Wooden Flower Craft Kit.
5. Tħaddim u Wiri
Once assembled, your ROBOTIME Pink Rose is ready for display. The design allows for some customization:
- Angoli aġġustabbli: You can gently adjust the height and angle of the flower and some leaves to create your desired aesthetic. This flexibility allows for various stunning displays to suit different vases or settings.
- Pjazzament: The compact size of the wooden rose makes it suitable for various locations, including tables, shelves, desks, or as a centerpiece.
Figure 5.1: Demonstrating adjustable flower angles and stem height.
Figura 5.2: Eżample of the wooden rose as a home decor item.
6. Manutenzjoni
To ensure the longevity and appearance of your wooden pink rose, follow these simple maintenance guidelines:
- Tindif: Gently dust the assembled model with a soft, dry cloth or a soft brush to remove any accumulated dust. Avoid using abrasive cleaners or excessive moisture.
- Kura Ambjentali: Keep the wooden rose away from direct sunlight, high humidity, and extreme temperature changes to prevent warping or fading of the wood.
7 Issolvi l-problemi
While the ROBOTIME kit is designed for straightforward assembly, you may encounter minor issues. Here are some common concerns and solutions:
- Difficulty Detaching Pieces: If a piece is difficult to remove from the wooden sheet, gently rock it back and forth or use a small, blunt object to push it out. Avoid excessive force to prevent breakage.
- Biċċiet li ma joqogħdux tajjeb: Ensure you are using the correct pieces for each step. Refer to the instruction book's diagrams. If a piece is slightly tight, gentle pressure should suffice. Do not force pieces together, as this can cause damage.
- Broken or Lost Pieces: In the event that some parts are broken or lost during assembly, ROBOTIME offers a part replacement service. Please refer to the 'Warranty and Support' section for details on how to request replacements.
8. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | ROBOTIME |
| Isem tal-Mudell | TW041 (RBT-TW-P) |
| Kulur | Pink Rose |
| Materjal | Injam |
| Dimensjonijiet tal-oġġett (L x W x H) | 3.3 x 2.5 x 0.1 pulzieri (8.64 x 6.35 x 20.32 ċm) |
| Piż tal-oġġett | 3.84 uqija (0.11 Kilogrammi) |
| Numru ta' Biċċiet | 1 (referring to the main flower unit) |
| Età Rakkomandata | 14 snin 'il fuq |
| Ħin tal-Assemblea | Madwar 30 minuta |
9. Garanzija u Appoġġ
ROBOTIME is committed to providing high-quality products and customer satisfaction. If you encounter any issues with your kit:
- Part Replacement Service: If any parts are broken or lost during the assembly process, ROBOTIME offers a complimentary part replacement service. Please contact ROBOTIME customer support with details of the missing or damaged parts.
- Ikkuntattja l-Appoġġ: For further assistance, questions, or to request replacement parts, please visit the official ROBOTIME store on Amazon or contact their customer service directly through the platform where you purchased the product.
