Introduzzjoni
This manual provides detailed instructions for the installation, operation, and maintenance of your PRUVEEO 1080P Back Up Camera. This camera is specifically designed as a rear view camera compatible with PRUVEEO Mirror Dash Cams J20-4CH and J30 models, offering a clear 1080P resolution for enhanced safety and convenience when reversing.
X'hemm fil-Kaxxa
- PRUVEEO 1080P Back Up Camera
- 2.5mm to 4 Pin Connection Cable
Image: The PRUVEEO 1080P Back Up Camera, featuring a compact black camera unit with a lens, and a coiled black and red connection cable with a 2.5mm jack. Water splashes are depicted around the camera, indicating its waterproof design.
Speċifikazzjonijiet
| Dimensjonijiet tal-Prodott | 11.02 x 2 x 1.95 pulzieri (28 x 5.08 x 4.95 ċm) |
| Piż tal-oġġett | 2.4 uqija (68 gramma) |
| Riżoluzzjoni tal-Qbid tal-Vidjo | 1080p |
| Teknoloġija tas-Sensor Ottiku | CMOS |
| Tip ta' Lenti | Angolu Wiesa', Fiss |
| Tip ta' Konnettur | 2.5mm to 4 Pin (for compatibility with PRUVEEO J20-4CH/J30 Dash Cams) |
| Tip ta' Installazzjoni | Immonta fil-wiċċ |
| Teknoloġija tal-Wiri | LCD (via compatible dash cam) |
Setup u Installazzjoni
Proper installation is crucial for optimal performance. This camera is designed to be connected to a compatible PRUVEEO Mirror Dash Cam (J20-4CH/J30).
Immuntar tal-Kamera
- Agħżel Post: Select a suitable location at the rear of your vehicle, typically above the license plate or near the trunk handle, ensuring a clear view of the area behind the vehicle. The camera is designed for surface mounting.
- Immuntar Sikur: Use the provided mounting bracket and screws to securely attach the camera to the chosen surface. Ensure the camera is oriented correctly for the desired viewangolu tal-ing.
Konnessjoni tal-Wiring
- Qabbad ma' Dash Cam: Locate the rear camera input port on your PRUVEEO J20-4CH or J30 Mirror Dash Cam. This port is typically a 2.5mm jack.
- Kejbil tar-Rotta: Carefully route the 2.5mm to 4 Pin connection cable from the rear camera to the dash cam, ensuring it is tucked away safely to avoid interference with vehicle operations. Avoid sharp bends or pinching the cable.
- Konnessjoni tal-Enerġija: The camera receives power through its connection to the dash cam. Ensure the dash cam is properly powered according to its own manual.
- Funzjonalità tat-Test: Before finalizing cable routing, power on your dash cam and shift your vehicle into reverse (if applicable) to confirm the rear camera displays correctly on the dash cam screen. Adjust the camera angle as needed.
Istruzzjonijiet Operattivi
Once properly installed and connected to your compatible PRUVEEO Mirror Dash Cam, the rear camera operates automatically.
- Wiri Awtomatiku: When the vehicle is put into reverse gear (and the dash cam is correctly wired to detect this signal), the dash cam display will automatically switch to the rear camera view, providing a live feed for parking and reversing maneuvers.
- Reġistrazzjoni: The rear camera's footage is typically recorded simultaneously with the front camera footage by the dash cam, providing comprehensive coverage of your vehicle's surroundings. Refer to your dash cam's manual for specific recording settings and playback options.
- ViewIng Angolu: Il-lenti ta 'angolu wiesa' tipprovdi qasam wiesa 'ta' view, minimizing blind spots behind your vehicle.
Manutenzjoni
To ensure the longevity and optimal performance of your PRUVEEO Back Up Camera, follow these maintenance guidelines:
- Tindif tal-Lenti: Naddaf il-lenti tal-kamera regolarment b'ċarruta ratba u damp drapp biex tneħħi l-ħmieġ, it-trab, jew tbajja’ ta’ ilma li jistgħu jostakolaw viewEvita prodotti tat-tindif li joborxu.
- Spezzjoni tal-Cable: Periodically inspect the connection cable for any signs of wear, damage, or loose connections. Ensure it remains securely routed and protected.
- Iċċekkja tal-Immuntar: Verify that the camera remains securely mounted and that its angle has not shifted due to vibrations or impacts.
- Protezzjoni tat-Temp: While the camera is designed to be waterproof, extreme weather conditions (e.g., heavy snow, ice) may temporarily affect image clarity. Ensure the lens is clear before driving.
Issolvi l-problemi
If you encounter issues with your PRUVEEO Back Up Camera, refer to the following common problems and solutions:
- No Image on Dash Cam Screen:
- Ensure the 2.5mm to 4 Pin cable is securely connected to both the rear camera and the dash cam.
- Verify that your dash cam is powered on and functioning correctly.
- Check if the dash cam is set to display the rear camera input when reversing. Refer to your dash cam's manual.
- Spezzjona l-kejbil għal kwalunkwe ħsara jew tgħawwiġ viżibbli.
- Immaġni Mċajpra jew Mgħawġa:
- Clean the camera lens thoroughly with a soft, lint-free cloth.
- Ensure there is no condensation or debris on the lens.
- Check if the camera is securely mounted and not vibrating.
- Sinjal Intermittenti:
- Iċċekkja l-konnessjonijiet kollha tal-kejbil għal laxkezza.
- Ensure the cable is not being pinched or damaged by vehicle components.
- Test the camera with another compatible dash cam if possible, to rule out issues with the dash cam itself.
Garanzija u Appoġġ
For warranty information, technical support, or service inquiries regarding your PRUVEEO 1080P Back Up Camera, please contact PRUVEEO customer service directly. Refer to the contact information provided with your original purchase or visit the official PRUVEEO websit.
Manifattur: PRUVEEO
Pajjiż ta' Oriġini: Iċ-Ċina
