Prodott Overview
The WALI GSMU001XL is a heavy-duty single monitor gas spring desk mount designed to support ultrawide or curved LCD/LED screens ranging from 17 inches to 49 inches. It can hold monitors weighing up to 44 lbs and is compatible with VESA mounting patterns of 75x75mm and 100x100mm. This mount offers full adjustability for optimal viewing angles and includes integrated USB Type-C and USB Type-A 3.0 ports for convenient connectivity.
The mount features a two-stage locking system, supporting both C-clamp and Grommet Base installations on desks with a thickness between 0.47 inches and 1.97 inches.
Kontenut tal-Pakkett
Before beginning installation, please ensure all components are present and undamaged. If any parts are missing or damaged, contact WALI customer support.
- 1 x WALI Ultrawide Monitor Desk Mount (GSMU001XL)
- Mounting Hardware Kit (screws, washers, spacers, Allen wrenches)
- Manwal għall-Utent
Setup u Installazzjoni
Follow these steps carefully to install your WALI GSMU001XL monitor mount. Two installation methods are available: C-clamp and Grommet Base.
Step 1: Choose Mounting Method
Determine whether to use the C-clamp or Grommet Base. Both methods are compatible with desk thicknesses from 0.47 inches to 1.97 inches.
Step 2: Assemble the Base and Arm
Assemble the base according to your chosen mounting method (C-clamp or Grommet Base). Attach the lower arm section to the base.
Pass 3: Waħħal il-Pjanċa VESA mal-Monitor
Attach the VESA plate to the back of your monitor using the appropriate screws from the hardware kit. Ensure the screws are tightened securely but do not overtighten.
Pass 4: Immonta l-Monitor mad-Driegħ
Carefully slide the monitor (with the attached VESA plate) onto the upper arm section. Ensure it locks into place. It is recommended to have assistance when mounting heavier monitors.
Step 5: Connect USB Cables
Connect the integrated USB Type-C and USB Type-A 3.0 ports on the mount to your computer using the provided cables. Route cables through the arm's cable management channels for a tidy setup.
Tħaddim tad-Driegħ tal-Monitor
The WALI GSMU001XL monitor arm offers extensive adjustability to achieve an ergonomic viewing pożizzjoni.
Aġġustament tal-Pożizzjoni tal-Monitor
The arm allows for the following movements:
- Mejjel: Adjust the monitor angle from +50° to -20°.
- Dawwar: Rotate the monitor horizontally up to +90°/-90°.
- Rotazzjoni: Rotate the monitor 360° to switch between landscape and portrait modes.
- Aġġustament Għoli: The gas spring arm allows for a height range of 9.09 inches to 19.69 inches.
- Estensjoni: The arm can extend up to 21.93 inches.
Aġġustament tat-Tensjoni tar-Rebbiegħa tal-Gass
The gas spring tension must be adjusted to match your monitor's weight for proper balance and movement. Use the provided Allen wrench to adjust the tension screw located on the arm.
- To adjust for lighter monitors or if the monitor floats up: Turn the tension screw lejn l-arloġġ.
- To adjust for heavier monitors or if the monitor sags down: Turn the tension screw lejn il-lemin.
Adjust gradually until the monitor stays in position when released.
Manutenzjoni
To ensure the longevity and proper function of your WALI monitor arm, follow these simple maintenance guidelines:
- Tindif: Wipe the arm and base with a soft, damp drapp. Evita prodotti tat-tindif jew solventi li joborxu li jistgħu jagħmlu ħsara lill-finitura.
- Kontrolli perjodiċi: Iċċekkja l-viti u l-konnessjonijiet kollha perjodikament biex tiżgura li jibqgħu ssikkati. Erġa' ssikka jekk meħtieġ.
- Rebbiegħa tal-Gass: The gas spring is designed for long-term use and typically requires no maintenance. If you notice changes in its performance, refer to the troubleshooting section.
Issolvi l-problemi
If you encounter issues with your monitor arm, refer to the following common problems and solutions:
Problem: Monitor Sags or Drops
Soluzzjoni: The gas spring tension is likely too low for your monitor's weight. Turn the tension screw lejn il-lemin to increase tension until the monitor holds its position.
Problem: Monitor Floats Up or is Difficult to Push Down
Soluzzjoni: The gas spring tension is likely too high for your monitor's weight. Turn the tension screw lejn l-arloġġ to decrease tension until the monitor holds its position.
Problem: Monitor is Unstable or Wobbles
Soluzzjoni:
- Kun żgur li l-viti kollha tal-immuntar (ċappetti tal-iskrivanija)amp/grommet, VESA plate, arm connections) are securely tightened.
- Verify that your desk is stable and can support the weight of the mount and monitor.
Problem: USB Ports Not Functioning
Soluzzjoni:
- Ensure the USB cables from the monitor arm are properly connected to your computer's USB ports.
- Test with different USB devices or computer ports to rule out device or port issues.
If problems persist after attempting these solutions, please contact WALI customer support.
Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Numru tal-Mudell | GSMU001XL |
| Brand | WALI |
| Kompatibilità tad-Daqs tal-Monitor | 17" to 49" Ultrawide/Curved |
| Kapaċità tal-piż | Sa 44 lbs (20 kg) |
| Kompatibilità VESA | 75x75mm, 100x100mm |
| Kompatibilità tal-Ħxuna tal-Iskrivanija | 0.47" - 1.97" (1.2 ċm - 5 ċm) |
| Tip ta 'Immuntar | C-clampBażi tal-Grommet |
| Angolu Mejjel | +50° / -20° |
| Angolu li jdur | +90° / -90° |
| Rotazzjoni | 360° (Landscape to Portrait) |
| Medda Għoli | 9.09" - 19.69" (23.1 ċm - 50 ċm) |
| Estensjoni Massima tad-Driegħ | 21.93" (55.7 ċm) |
| Integrated Ports | 1 x USB Type-C, 1 x USB Type-A 3.0 |
| Materjal | Aluminju |
| Kulur | Iswed |
Video tal-Prodott
Garanzija u Appoġġ
For warranty information or technical assistance, please contact WALI customer support. WALI provides experienced and friendly US-based customer support available to assist 7 days a week.
Refer to the product packaging or the official WALI webis-sit għad-dettalji ta' kuntatt u t-termini tal-garanzija l-aktar riċenti.