Manwal tal-Utent tal-Muntatura tat-TV SANUS Full Motion

Introduzzjoni

This manual provides detailed instructions for the safe and effective installation, operation, and maintenance of your SANUS Full Motion TV Mount. This mount is designed to securely hold flat-panel televisions ranging from 32 to 55 inches in size and weighing up to 55 pounds. Its full-motion capabilities allow for optimal viewminn diversi pożizzjonijiet ġewwa kamra.

Image: The SANUS Full Motion TV Mount, showcasing its articulating arm and TV mounting plate. This mount is designed for single-stud installation and provides a wide range of motion for your television.

Informazzjoni dwar is-Sigurtà

WARNING: Failure to read and follow all instructions, warnings, and cautions in this manual can result in personal injury, property damage, or voiding of your warranty.

• Ensure the mounting surface can support the combined weight of the mount and the television. This mount is designed for installation into a single wood stud. Do not install into drywall alone.
• Verify the TV's weight and VESA pattern are within the mount's specifications (32-55 inches, up to 55 lbs, VESA 75x75 to 400x400).
• Always use a qualified professional for installation if you are unsure about the structural integrity of your wall or the installation process.
• Do not overtighten screws. Overtightening can cause damage to the mount or your television.
• Żomm il-partijiet żgħar u l-materjali tal-ippakkjar 'il bogħod mit-tfal.
• Always use a stud finder to locate the center of the wood stud accurately.
• Two people are recommended for safe installation, especially when lifting the television.

Kontenut tal-Pakkett

Before beginning installation, ensure all parts are present and undamaged. If any parts are missing or damaged, do not attempt to install. Contact Sanus customer support.

• Assemblea tal-Pjanċa tal-Ħajt
• Parentesi tat-TV (2)
• Assorted TV Mounting Hardware (screws, washers, spacers for various TV models)
• Wall Mounting Hardware (lag bolts, washers)
• Livell
• Mudell ta 'Installazzjoni
• Manwal ta' Istruzzjoni

Setup u Installazzjoni

The SANUS Full Motion TV Mount is designed for easy DIY installation, typically taking 30 minutes or less. Follow these steps carefully.

Għodod Meħtieġa (Mhux Inklużi)

• Finder Stud
• Drill
• Drill Bits (appropriate size for pilot holes)
• Ċavetta tas-Sokit jew Ċavetta Aġġustabbli
• Tornavit tar-ras Phillips
• Lapes
• Tape Measure

Pass 1: Ipprepara l-Ħajt

1. Using a stud finder, locate the center of a single wood stud at your desired TV height. Mark the center of the stud with a pencil.
2. Hold the wall plate assembly against the wall, aligning the center hole with your stud mark. Use the integrated level to ensure it is perfectly horizontal. Mark the positions for the lag bolts.
3. Drill pilot holes at the marked locations. Ensure the drill bit size matches the recommendations in the included installation guide to prevent splitting the stud or damaging the lag bolts.

Image: An installed SANUS TV mount on a wall, demonstrating its single-stud mounting capability. This design simplifies installation and is ideal for corner placements.

Pass 2: Immonta l-Pjanċa tal-Ħajt

1. Align the wall plate with the pilot holes.
2. Insert the lag bolts with washers through the wall plate and into the pilot holes.
3. Using a socket wrench, tighten the lag bolts until the wall plate is securely fastened to the wall. Do not overtighten.

Pass 3: Waħħal il-Brakketti tat-TV mat-Televiżjoni

1. Lay your television face down on a soft, clean surface to prevent scratches.
2. Identify the correct size screws, washers, and spacers from the provided hardware kit that fit your TV's VESA mounting holes. Refer to your TV's manual for VESA pattern and screw length requirements.
3. Attach the two TV brackets to the back of your television using the selected hardware. Ensure the brackets are centered and securely tightened.

Image: A diagram illustrating the compatibility of the full-motion wall mount with TVs ranging from 32 to 55 inches and supporting VESA patterns from 75x75 to 400x400 mm.

Pass 4: Immunta t-Televiżjoni mal-Pjattaforma tal-Ħajt

1. With assistance, carefully lift the television and hook the TV brackets onto the wall plate assembly.
2. Secure the TV to the mount using the locking mechanisms or screws as indicated in the detailed installation guide.
3. Perform any post-installation leveling adjustments as needed. The mount allows for leveling adjustments even after the TV is hung.

Image: A close-up of a hand using a screwdriver to secure a component of the TV mount, emphasizing the easy 1-2-3 installation process that can be completed in approximately 15 minutes on a single stud.

For a visual guide, please refer to the official installation video (if available from the seller).

Istruzzjonijiet Operattivi

Your SANUS Full Motion TV Mount provides flexible viewgħażliet:

• Estensjoni: Gently pull the TV away from the wall to extend it up to 19 inches. This allows for greater flexibility in viewing angles and access to the back of the TV. When not in use, push the TV back towards the wall for a low-profile finish, retracting to just 1.99 inches.


Immaġni: Naħa waħda view of a TV mounted on the SANUS mount, illustrating its ability to extend up to 19 inches from the wall and retract to a slim 1.99 inches for a low-profile ħares.

• Dawwar: The mount allows for up to 50 degrees of swivel to the left and right. Gently push the TV to the desired angle to optimize your viewing experience from any seat in the room.

Image: A TV mounted on the SANUS mount, demonstrating its 50-degree swivel capability to the left and right, allowing for versatile viewangoli.
• Mejjel: Adjust the TV's vertical angle by up to 15 degrees using the tool-free tilt mechanism. This feature is particularly useful for reducing glare from windows or lights, and for optimizing viewing when the TV is mounted above eye level, such as over a fireplace.


Image: A TV mounted on the SANUS mount, showing a 15-degree downward tilt, highlighting the tool-free tilt feature designed to eliminate glare.

• Ġestjoni tal-Kejbil: Utilize the built-in cable management channels on the mount's arm to route and organize your TV cables for a clean and tidy appearance.


Image: A close-up of the SANUS mount's articulating arm with a cable routed through its integrated channels, demonstrating the built-in cable management feature for a clean setup.

Manutenzjoni

To ensure the longevity and proper function of your SANUS TV mount, follow these simple maintenance guidelines:

• Tindif: Dust the mount regularly with a soft, dry cloth. For stubborn marks, a slightly damp Jista' jintuża drapp, segwit minn tnixxif immedjat. Evita prodotti tat-tindif jew solventi li joborxu.
• Iċċekkja l-Konnessjonijiet: Periodically (e.g., every 6-12 months), inspect all screws and bolts to ensure they remain securely tightened. Do not overtighten.
• Kontroll tal-Moviment: Occasionally move the TV through its full range of motion (extension, swivel, tilt) to ensure smooth operation. If any stiffness is noted, ensure no cables are snagged.

Issolvi l-problemi

If you encounter issues with your SANUS Full Motion TV Mount, refer to the following common problems and solutions:

Speċifikazzjonijiet

• Ditta: Sanus
• Mudell: Muntatura tat-TV b'Mozzjoni Sħiħa (ASIN: B0D5RLS8JP)
• Daqsijiet tat-TV Kompatibbli: 32 sa 55 pulzier
• Kapaċità massima tal-piż: 55 liri
• Tip ta 'Immuntar: Wall Mount (Single Stud)
• Tip ta' Moviment: Artikolazzjoni (Mozzjoni Sħiħa)
• Estensjoni mill-Ħajt: Sa 19 pulzier
• Retracted Profile: 1.99 inches from wall
• Medda ta' Dawwar: Up to 50 degrees left and right
• Firxa ta 'Tilt: Up to 15 degrees (tool-free)
• Kompatibbiltà VESA: 75x75mm sa 400x400mm
• Materjal: Metall
• Kulur: Iswed
• Piż tal-oġġett: Madwar 9.24 liri
• Dimensjonijiet tal-pakkett: 20.04 x 11.85 x 2.56 pulzieri
• UPC: 793795537591

Garanzija u Appoġġ

SANUS stands behind the quality of its products. This TV mount comes with a garanzija ta 'sena, li jkopri difetti fil-materjali u l-abbilità taħt użu normali.

For any questions, installation assistance, or troubleshooting, please contact Sanus customer service. Our U.S.-based experts are available 7 days a week to provide support.

Informazzjoni ta' Kuntatt:

• Refer to the official Sanus webis-sit għad-dettalji ta' kuntatt l-aktar aġġornati.
• Online support resources and FAQs may also be available.