AstrHori XH-2 Camera Light Meter User Manual

1. Introduzzjoni

This manual provides detailed instructions for the operation and maintenance of your AstrHori XH-2 Camera Light Meter. Please read this manual thoroughly before using the device to ensure proper function and longevity.

Kontenut tal-Pakkett

• 1x AstrHori XH-2 Light Meter
• 1x USB-C Iċċarġjar Cable
• 1x Manwal għall-Utent

Figure 1: AstrHori XH-2 Light Meter and included accessories.

2. Speċifikazzjonijiet

Figure 2: Physical dimensions and key specifications of the XH-2 Light Meter.

3. Setup

3.1 Iċċarġjar tal-Apparat

The AstrHori XH-2 Light Meter features a built-in rechargeable lithium-ion battery. Before initial use, it is recommended to fully charge the device.

1. Locate the USB Type-C port on the bottom of the light meter.
2. Connect the provided USB-C cable to the light meter and a compatible USB power source (e.g., computer USB port, USB wall adapter).
3. The device will indicate charging status on its OLED display. A full charge typically takes approximately 30 minutes.

Figure 3: USB Type-C charging port located on the bottom of the device.

3.2 Mounting on a Camera

The XH-2 Light Meter is designed to be mounted on a camera's cold shoe. It does not establish electrical contact with the camera.

1. Ensure the light meter is powered off.
2. Slide the cold shoe mount of the light meter into your camera's cold shoe slot until it is securely seated.
3. The light meter can also be used handheld.

Figure 4: The XH-2 Light Meter mounted on a camera's cold shoe.

4. Istruzzjonijiet Operattivi

4.1 Power On/Off and Activation

• To power on, press the side button.
• To power off, long-press the side button for 0.5 seconds.
• The device enters a low-power dormant mode after 25 seconds of inactivity. To reactivate, click the metering button.
• The device automatically powers off after approximately 3 hours in dormant mode.

Figure 5: Power button location and activation method.

4.2 Nifhmu l-Wiri

The 0.66" OLED display shows various metering parameters. Refer to the diagram below for an overview of the display elements.

Figura 6: Aktarview of the XH-2 Light Meter's OLED display.

• EV/EC: Exposure Value / Exposure Compensation.
• Ħin tax-Shutter: Recommended shutter speed.
• Apertura: Recommended aperture value.
• ISO: Current ISO setting.
• Wiri tal-Qawwa: Indikatur tal-livell tal-batterija.
• Aperture Priority/Shutter Priority (A/T): Indicates the current metering mode.
• Lock Icon: Indicates if metering is locked.
• Kejl f'ħin reali: Indicates active metering.

4.3 Parametri ta 'aġġustament

The light meter features a central button and a surrounding dial for parameter adjustments.

Figure 7: Button and dial functions for parameter adjustment.

• Changing Modes (A/T): Double-click the central button to switch between Aperture Priority (A) mode and Shutter Priority (T) mode.
• Issettjar tal-ISO: Double-click the central button and press for approximately 0.5 seconds to enter ISO setting mode. Use the dial to adjust the ISO value.
• Setting EV/EC: Double-click the central button and press for approximately 3.5 seconds to enter EV/EC setting mode. Use the dial to adjust the Exposure Value or Exposure Compensation.
• Aġġustament tal-Valuri: Once a parameter (ISO, Aperture, Shutter Speed, EV/EC) is selected, rotate the outer dial to change its value.

The light meter supports a wide range of settings:

• Medda ISO: ISO 5 to ISO 6400
• Medda tal-Apertura: F1 sa F32
• Firxa tal-Veloċità tax-Shutter: 1/8000s to 32s

4.4 Metering Process

The XH-2 uses a 30° average metering system with an anti-reflective stepped design for accurate light gathering.

Figure 8: The light metering hole with its convex lens and anti-reflective design.

1. Point the light meter towards the subject or scene you wish to meter.
2. The device will perform real-time metering, displaying the recommended exposure settings (shutter speed and aperture) based on your set ISO and selected priority mode.
3. A single metering takes approximately 0.5 seconds.
4. To lock the current metering, press the central button once when real-time metering is active.

Nota: The metering module has been upgraded for enhanced accuracy.

5. Manutenzjoni

• Tindif: Use a soft, dry cloth to clean the exterior of the light meter. Do not use liquid cleaners or solvents.
• Ħażna: Aħżen l-apparat f'post frisk u niexef 'il bogħod mix-xemx diretta u minn temperaturi estremi.
• Kura tal-batterija: Għal ħajja ottimali tal-batterija, evita li tiċċarġja kompletament il-batterija ta' spiss. Iċċarġja l-apparat regolarment, anke jekk ma jkunx qed jintuża għal perjodi twal.
• Protezzjoni: Evita li twaqqa 'l-apparat jew suġġett għal impatti qawwija.

6 Issolvi l-problemi

7. Garanzija u Appoġġ

For warranty information and technical support, please refer to the warranty card included in your product packaging or visit the official AstrHori websit. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal talbiet ta' garanzija.

Manifattur: AstrHori

Kuntatt: Please refer to the contact information provided on the AstrHori official website or your regional distributor.

8. Dimostrazzjoni tal-Vidjo tal-Prodott

Watch this official product video for a visual demonstration of the AstrHori XH-2 Camera Light Meter's features and operation.