Manwali+

Zgrmbo FJ3351A

ZGRMBO Digital Pool Thermometer User Manual

Mudell: FJ3351A

Introduzzjoni

The ZGRMBO Digital Pool Thermometer provides an accurate and convenient way to monitor water temperature in various environments, along with indoor temperature and time display. Its wireless design allows for remote monitoring, making it ideal for pools, bathtubs, fish tanks, and more.

This manual provides detailed instructions for setting up, operating, and maintaining your ZGRMBO Digital Pool Thermometer to ensure optimal performance and longevity.

ZGRMBO Digital Pool Thermometer and Display Unit

Image: The ZGRMBO Digital Pool Thermometer floating unit and its indoor display receiver.

Komponenti tal-Prodott

The ZGRMBO Digital Pool Thermometer package includes the following items:

  • 1 x Floating Pool Thermometer Sensor Unit
  • 1 x Indoor Display Receiver Unit
  • 1 x Lanyard
  • Manwal għall-Utent (dan id-dokument)

Note: AAA batteries (2 for sensor, 2 for receiver) are not included and must be purchased separately.

Setup Istruzzjonijiet

Follow these steps to set up your ZGRMBO Digital Pool Thermometer:

1. Installazzjoni tal-batterija

Proper battery installation is crucial for the device's functionality and waterproofing.

  1. For the Indoor Display Receiver:

    Locate the battery compartment on the back of the indoor display unit. Open the cover and insert 2 x AAA batteries, ensuring correct polarity (+/-). Close the battery cover securely.

  2. For the Floating Pool Thermometer Sensor Unit:

    Carefully unscrew the top cover of the floating sensor unit. Locate the battery box inside. Insert 2 x AAA batteries, observing correct polarity. Crucially, ensure the rubber sealing ring is properly seated and then tighten the cover firmly to prevent water seepage.

Battery installation for ZGRMBO thermometer units

Immaġni: Dettaljata view of battery compartments for both the indoor display unit and the floating sensor unit.

Three-step wireless connection process for ZGRMBO thermometer

Image: Visual guide for the 3-step wireless connection: install batteries in control, install batteries in sensor, wait 3 minutes for data reception.

2. Konnessjoni Inizjali

After installing batteries in both units, place the floating sensor unit in the water (pool, bathtub, etc.). The indoor display receiver will automatically attempt to connect with the sensor. Allow approximately 3 minutes for the units to establish a connection and begin displaying temperature data.

If the temperature information is not received after 3 minutes, press and hold the "Search Button" on the indoor display unit for 2 seconds to manually initiate transmission. The signal icon on the LCD display will flash during this process.

Istruzzjonijiet Operattivi

The ZGRMBO Digital Pool Thermometer offers several display modes and functions:

Modi tal-Wiri

ZGRMBO thermometer display showing water temperature, indoor temperature, and time

Image: The indoor display unit showing water temperature, indoor temperature, and current time.

  • Temperatura tal-Ilma: Displays the temperature measured by the floating sensor unit.
  • Temperatura ta 'ġewwa: Displays the ambient temperature at the location of the indoor display receiver.
  • Wiri tal-Ħin: Shows the current time (12/24-hour format).

Funzjonijiet tal-buttuna

ZGRMBO thermometer display unit with labeled buttons

Image: Close-up of the indoor display unit, highlighting the Search, MEM/+, and SET/℃/℉ buttons, and the battery box location.

  • Buttuna Fittex: Press and hold for 2 seconds to manually search for the sensor signal.
  • MEM/+ Button:
    • Agħfas darba biex view the maximum temperature recorded for the day.
    • Agħfas mill-ġdid biex view the minimum temperature recorded for the day.
    • In setting mode, use to increase values.
  • SET/℃/℉ Button:
    • Press once to switch between Celsius (℃) and Fahrenheit (℉) temperature units.
    • Agħfas u żommha biex tidħol fil-modalità tal-issettjar tal-ħin.

Ħin tal-issettjar

  1. Press and hold the "SET/℃/℉" button until the hour digits begin to flash.
  2. Use the "MEM/+" button to adjust the hour.
  3. Press the "SET/℃/℉" button again to move to the minute digits.
  4. Use the "MEM/+" button to adjust the minutes.
  5. Press the "SET/℃/℉" button one more time to confirm and exit time setting mode.

Manutenzjoni

To ensure the longevity and accuracy of your ZGRMBO Digital Pool Thermometer, follow these maintenance guidelines:

  • Tindif: Wipe both the sensor unit and the display receiver with a soft, damp drapp. Tużax tindif jew solventi li joborxu.
  • Sostituzzjoni tal-batterija: Replace batteries in both units when the low battery indicator appears on the display. Always ensure the sensor unit's cover is tightened securely after battery replacement to maintain its IPX8 waterproof rating.
  • Water Seepage Prevention: Before placing the digital pool thermometer in the water, always ensure the thermometer cover is tightened completely. This is critical to prevent water from entering the unit.
  • Addressing Water Mist: If you observe water mist on the screen of the wireless pool thermometer lid, immediately unscrew the lid. Allow the interior to dry completely before re-sealing and using the device again. This indicates a potential breach in the seal that needs to be addressed.
  • Ħażna: When not in use for extended periods, remove batteries from both units and store them in a cool, dry place.

Issolvi l-problemi

If you encounter issues with your ZGRMBO Digital Pool Thermometer, refer to the following common problems and solutions:

Problema Kawża Possibbli Soluzzjoni
No display on receiver unit. Batteriji mejta jew installati ħażin. Iċċekkja l-polarità tal-batterija u ibdelha b'batteriji AAA ġodda.
No temperature reading from sensor. Sensor batteries dead, sensor not paired, or out of range.
  • Ibdel il-batteriji tas-sensor.
  • Press and hold the "Search Button" on the receiver for 2 seconds.
  • Move the receiver closer to the sensor unit (within 196 feet / 60 meters).
  • Ensure no significant obstructions (thick walls, metal structures) are between units.
Qari mhux preċiż tat-temperatura. Sensor unit not fully submerged or exposed to direct sunlight. Ensure the sensor is properly floating and submerged. Avoid placing the sensor in direct, intense sunlight for prolonged periods if possible.
Water mist inside sensor display. Lid not tightened sufficiently or seal compromised. Immediately unscrew the lid, dry the interior thoroughly, and then re-tighten the lid very firmly, ensuring the rubber seal is correctly seated.
Id-displej juri ħin mhux korrett. Il-ħin mhux issettjat jew irrisettjat wara li tinbidel il-batterija. Refer to the "Setting Time" section in Operating Instructions to adjust the time.

Speċifikazzjonijiet

Karatteristika Dettall
Numru tal-Mudell FJ3351A
Brand Zgrmbo
Klassifikazzjoni li ma jgħaddix ilma minnha IPX8 (Floating Sensor Unit)
Medda ta 'Trażmissjoni bla Fili Sa 196 pied (60 metru) fl-arja aperta
Preċiżjoni tat-Temperatura ± 1℃
Unitajiet tat-Temperatura Celsius (℃) / Fahrenheit (℉)
Sors tal-Enerġija (Sensor) 2 x Batteriji AAA (mhux inklużi)
Sors tal-Enerġija (Riċevitur) 2 x Batteriji AAA (mhux inklużi)
Tip ta 'Wiri LCD diġitali
Materjal Plastik
Komponenti Inklużi Lanyard

Xenarji ta' Applikazzjoni

The ZGRMBO Digital Pool Thermometer is versatile and suitable for a wide range of applications:

  • Pixxini
  • Bathtubs and Children's Bathing
  • Fish Tanks and Aquariums
  • Saunas and Hot Springs
  • Aquaculture Ponds
Various application scenarios for ZGRMBO thermometer including swimming pools, aquariums, children bathing, and hot springs

Immaġni: Eżamples of where the ZGRMBO thermometer can be used, such as swimming pools, aquariums, and hot springs.

Appoġġ għall-Klijent

For any usage problems, questions, or concerns not covered in this manual, please feel free to contact ZGRMBO customer service. We are committed to providing assistance and ensuring your satisfaction with our product.

Jekk jogħġbok irreferi għall-imballaġġ tal-prodott jew tal-bejjiegħ bl-imnut. websit għal informazzjoni ta' kuntatt speċifika.

Dokumenti Relatati - FJ3351A

Preview Arloġġ Diġitali Zgrmbo 8810-2: Karatteristiċi, Setup, u Funzjonijiet
Gwida komprensiva għall-Arloġġ Diġitali Zgrmbo 8810-2, li tkopri l-karatteristiċi tal-prodott, l-issettjar tal-ħin u l-allarm, funzjonijiet speċjali bħall-attivazzjoni tal-vuċi, u s-soluzzjoni tal-problemi. Batterija integrata, disinn sempliċi.
Preview Manwal u Gwida għall-Utent tal-Arloġġ Diġitali Zgrmbo DS-6625
Gwida komprensiva għall-Arloġġ Diġitali Zgrmbo DS-6625, li tkopri d-deskrizzjoni tal-prodott, l-issettjar tal-ħin, is-setup tal-arloġġ tal-allarm, u l-aġġustamenti tal-luminożità. Tgħallem kif tuża l-arloġġ diġitali tiegħek b'mod effettiv.
Preview Arloġġ tal-Allarm tal-Mużika LED Zgrmbo: Manwal tal-Utent, Karatteristiċi, u Settings
Manwal ta' struzzjonijiet dettaljat għall-arloġġ tal-allarm tal-mużika LED Zgrmbo. Ikopri l-issettjar tal-ħin, il-konfigurazzjoni tal-allarm, il-kontroll tal-luminożità, il-modi awtomatiċi tal-luminożità, l-għażliet tal-ifformattjar, il-manutenzjoni, u r-rimi ambjentali. Tgħallem tuża l-karatteristiċi kollha tal-arloġġ tal-allarm diġitali tiegħek.