1. Introduzzjoni
Grazzi tax-xiriasing the OREiN 2 Pack Motion Sensor Outdoor Lights. These advanced flood lights are designed to provide efficient and customizable outdoor illumination with intelligent motion sensing and dimmable dusk-to-dawn functionality. Featuring 450° superwide adjustment and durable IP65 waterproof construction, these lights are ideal for enhancing security and visibility around your home, garden, garage, or backyard.
Please read this manual thoroughly before installation and operation to ensure proper use and to maximize the lifespan of your product.
2. Informazzjoni Importanti dwar is-Sigurtà
- TWISSIJA: Riskju ta' xokk elettriku. Skonnettja l-provvista tal-enerġija mill-fjuż jew mis-circuit breaker qabel l-installazzjoni jew is-servizz.
- Dan il-prodott għandu jiġi installat skont il-kodiċi tal-installazzjoni applikabbli minn persuna familjari mal-kostruzzjoni u t-tħaddim tal-prodott u l-perikli involuti.
- Uża biss konnetturi tal-wajer elenkati mill-UL/ETL.
- Do not install this fixture on surfaces that are easily flammable.
- Kun żgur li l-konnessjonijiet kollha huma siguri u iżolati kif suppost.
- Do not look directly into the LED light source when the light is on.
- Żomm il-materjali tal-ippakkjar 'il bogħod mit-tfal.
- This product is designed for outdoor use only and is hardwired. Do not attempt to modify it for battery or plug-in use.
3. Kontenut tal-Pakkett
Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni:
- OREiN Motion Sensor Outdoor Lights (2 units)
- Ħardwer tal-Immuntar
- Wiring Components (wire nuts)
- LED Light Panels (integrated)
- Manwal ta' Istruzzjoni
Image: Two OREiN motion sensor outdoor lights, showing the dual heads and central motion sensor. These are the primary units included in the package.
4. Prodott Aktarview
The OREiN Motion Sensor Outdoor Light features a robust design with highly adjustable components to provide optimal lighting coverage.
- Adjustable Light Heads: Each light arm has 3 flexible joints, allowing for 450° width adjustment. This enables precise aiming of the light to cover specific areas or avoid light pollution.
- Sensor tal-Moviment: A 180° infrared PIR sensor detects motion up to 40 feet away, covering an area of approximately 1250 sq ft.
- Spotlights LED: Equipped with 5000K high-quality LED beads and professional filter lenses, providing bright and efficient illumination.
- Kostruzzjoni Durabbli: Made from PC material with IP65 waterproof certification, ensuring resistance to high temperatures, frost, UV, and shattering for long-lasting outdoor use.
Image: This diagram illustrates the six adjustable joints on the light arms, allowing for extensive rotation and aiming of the light heads and the central motion sensor.
Immaġni: Sploda view highlighting the internal components and adjustable features of the OREiN dual-head light, including the sensor and LED elements.
5. Gwida għall-Installazzjoni
This outdoor motion light is AC hardwired and requires electrical connection to a standard junction box. A junction box is not included.
5.1 Lista ta 'Kontroll ta' Qabel l-Installazzjoni
- Kun żgur li l-enerġija hija skonnettjata mis-circuit breaker qabel tibda.
- Confirm you have a standard junction box (five 1/2 inch 16 cubic inches capacity recommended).
- Gather necessary tools: screwdriver, wire strippers, wire nuts (included), electrical tape.
5.2 Passi tal-Immuntar
- Fix the bracket: Attach the mounting bracket securely to your standard junction box using the provided screws. Ensure it is firmly in place.
- Qabbad il-wajers: Carefully connect the wires from the light fixture to the corresponding wires in the junction box. Match colors: black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground). Use the included wire nuts to secure connections.
- Tighten connections: Ensure all wire connections are tight and properly insulated with wire nuts.
- Fix the light: Align the light fixture with the mounting bracket and secure it with the provided screws. Ensure the fixture is flush against the mounting surface.
Image: A visual step-by-step guide demonstrating the hardwired installation process, from mounting the bracket to securing the light fixture.
Image: The light fixture installed under a soffit, illustrating its flexibility for various mounting angles without restricting the sensor's functionality.
6. Istruzzjonijiet Operattivi
The OREiN motion sensor outdoor lights offer three distinct working modes, controlled by the settings on the motion sensor unit.
6.1 Modi ta' Ħidma
- Modalità Manwali: The light is controlled by a manual wall switch. Turn the switch on to activate the light at 100% brightness, and off to turn it off. This mode bypasses the motion sensor and dusk-to-dawn features.
- Safety Mode (Motion Activated at Night): In this mode, the light will only activate at night when motion is detected. It will turn on to 100% brightness and remain on for the set duration (TIME setting) after motion ceases.
- Dusk to Dawn Dimmable Mode: The light automatically turns on at 30% brightness when it gets dark. When motion is detected, it brightens to 100% for the set duration (TIME setting), then returns to 30% brightness.
Image: This graphic demonstrates the dimmable dusk-to-dawn functionality, showing the light at 30% brightness in standby and increasing to 100% upon motion detection.
Image: Visual representation of the three operating modes: motion-activated 100% brightness, motion-activated 30% brightness (dusk-to-dawn), and manual switch control.
6.2 Aġġustamenti tas-Sensor
The motion sensor has three adjustable dials to customize its behavior:
- ĦIN: Adjusts the duration the light stays on after motion is detected and ceases. Settings typically range from a few seconds to several minutes (e.g., 10s, 40s, 8min).
- SENS (Sensittività): Controls the detection range of the motion sensor. Higher sensitivity means a wider detection area (e.g., up to 40ft).
- LUX (Daylight Sensor): Determines the ambient light level at which the motion sensor becomes active.
- Set to the "moon" end for minimal setting (light activates only in very dark conditions).
- Set to the "sun" end for maximum setting (light activates in brighter conditions, including daytime for testing).
For normal nighttime operation, ensure the LUX sensor is set towards the "moon" end to prevent the light from activating during the day.
Image: This image displays the adjustable dials for TIME, SENS, and LUX settings on the motion sensor, along with an illustration of the 180° detection angle and 40ft sensing distance.
7. Manutenzjoni
Regular maintenance ensures optimal performance and longevity of your OREiN outdoor lights.
- Tindif: Periodically wipe the light fixture and sensor lens with a soft, damp cloth to remove dirt, dust, or debris. Do not use abrasive cleaners or solvents.
- Spezzjoni: Annually inspect the wiring and mounting for any signs of wear, damage, or loose connections. Ensure the light heads and sensor are still securely positioned.
- LEDs: Is-sors tad-dawl LED huwa integrat u ma jistax jiġi sostitwit mill-utent.
8 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-dawl ma jixgħelx. | No power; loose wiring; LUX setting too high (daytime); faulty sensor. | Check circuit breaker/fuse. Ensure all wire connections are secure. Adjust LUX setting to "moon" for nighttime operation. Test sensor by waving hand in front. |
| Id-dawl jibqa’ mixgħul il-ħin kollu. | Continuous motion detected; TIME setting too long; LUX setting too low (always dark). | Ensure no constant motion in detection area. Adjust TIME setting to a shorter duration. Adjust LUX setting to prevent activation in bright conditions. |
| Id-dawl jteptep jew jitteptep. | Unstable power supply; loose wiring; interference. | Check power source stability. Re-check all wire connections. Ensure no strong electromagnetic interference nearby. |
| Is-senser tal-moviment mhux qed jiskopri. | Obstruction; SENS setting too low; sensor dirty; incorrect angle. | Clear any obstructions. Increase SENS setting. Clean sensor lens. Adjust sensor angle for optimal coverage. |
9. Speċifikazzjonijiet tal-Prodott
| Karatteristika | Dettall |
|---|---|
| Brand | OREIN |
| Isem tal-Mudell | OL3600140 |
| Kulur | Iswed |
| Materjal | Acrylonitrile Butadiene Styrene (PC) |
| Formola ta' Tagħmir tad-Dawl | Floodlight |
| Dimensjonijiet tal-Prodott | 15.16"T x 5.83"W x 5.51"Għ |
| Użu fuq ġewwa/barra | Barra |
| Sors tal-Enerġija | Hardwired AC (220 Volts) |
| Tip ta' Installazzjoni | Immonta fil-wiċċ |
| Karatteristiċi Speċjali | 133LM/W high efficiency, 180°/40FT Motion Sensor, 3 modes (dusk to dawn), 450° Adjustable Flood Lights, IP65 Waterproof |
| Tip ta' Sors tad-Dawl | LED |
| Kulur Dawl | Abjad Kessaħ (5000K) |
| Numru ta' Sorsi tad-Dawl | 2 (għal kull unità) |
| Wattage | 12 watts (per unit) |
| Luminożità | 1600 LM (equivalent to 150W) |
| Tip ta' Swiċċ | Sensor tal-Moviment |
| Livell ta 'Reżistenza għall-Ilma | IP65 Waterproof |
| Piż tal-oġġett | 3.31 liri |
| Ċertifikazzjonijiet | CE, FCC, RoHS |
10. Garanzija u Appoġġ
10.1 Informazzjoni dwar Garanzija
This OREiN product comes with a Garanzija ta' 2 snin mill-manifattur mid-data tax-xiri. Din il-garanzija tkopri difetti fil-materjali u l-abbilità taħt użu normali.
The warranty does not cover damage caused by improper installation, misuse, accidents, unauthorized repairs, or natural disasters.
10.2 Appoġġ għall-Klijent
For any questions, technical assistance, or warranty claims, please contact OREiN customer support:
- Contact via Amazon: You can contact us directly through the Amazon platform where you purchased the product.
- Online: Fittex għal "OREiN" online to find our official websit u informazzjoni ta' kuntatt.
- Appoġġ tat-Telefon: For 24-hour service, you may call 1(844)506-1530.
We recommend contacting support before initiating any returns, as many issues can be resolved quickly with assistance.
Image: OREiN customer service contact information, including a phone number for 24-hour support.
