XECH Hydroboil Lite Portable Electric Kettle

Introduzzjoni

The XECH Hydroboil Lite is a compact and efficient portable electric kettle designed for convenience and ease of use. Its bottle-like design and rapid boil technology make it ideal for travel, office use, or any situation where quick access to hot water is needed. This manual provides essential information for safe and effective operation, maintenance, and troubleshooting of your Hydroboil Lite kettle.

Informazzjoni dwar is-Sigurtà

Please read all safety instructions carefully before using the appliance. Improper use can result in electric shock, fire, or serious injury.

• Do not immerse the kettle, power cord, or plug in water or other liquids.
• Tiżgura l-voltagIndikat fuq l-apparat jikkorrispondi għall-vol tal-mejn lokali tiegħektage before connecting the kettle.
• Żomm l-apparat fejn ma jintlaħaqx mit-tfal.
• Tħaddimx il-kitla jekk il-korda tal-elettriku jew il-plagg ikunu bil-ħsara, jew jekk l-apparat ma jaħdimx sew jew ikun ġarrab xi ħsara b'xi mod.
• Dejjem poġġi l-kitla fuq wiċċ stabbli, ċatt u reżistenti għas-sħana.
• Do not fill the kettle above the maximum fill line to prevent boiling water from overflowing.
• Do not operate the kettle without water to prevent damage to the heating element (Boil Dry Protection is included, but it's best practice to avoid this).
• Exercise caution when handling hot water and steam. The silicone pressure release cap will release steam during operation.
• Skonnettja l-kitla mill-plagg tal-elettriku meta ma tkunx qed tużaha u qabel ma tnaddafha.
• This appliance is designed for boiling water only. Do not use it to heat milk, coffee, or other liquids.
• The power cord is ISI Marked for quality standards.

Prodott Overview

Familiarize yourself with the components of your XECH Hydroboil Lite kettle.

• Korp Prinċipali: The primary housing of the kettle, made from high-density ABS material.
• Kisi ta 'ġewwa: Constructed from 304-grade stainless steel for durability and safety.
• Lid with Silicone Pressure Release Cap: Ensures safe steam release during boiling.
• Buttuna tal-Enerġija b'Indikatur LED: For convenient one-button operation and status indication.
• Concealed Power Cord Storage: Located at the base for easy portability and tidy storage.
• Element tat-tisħin: Powerful 300W element for rapid boiling.

The XECH Hydroboil Lite kettle, showcasing its compact design, integrated power cord, and a clear glass cup of tea, highlighting its primary use.

The kettle's bottle-shaped design with its cleverly concealed power cord storage at the base, emphasizing portability and neatness.

A close-up view of the kettle's interior, highlighting the 304-grade stainless steel construction and the 'MAX' fill line, indicating its 400ml capacity.

An illustrative image showing the internal 300W heating element, demonstrating the rapid boil technology that heats water in approximately 2-3 minutes.

Setup

Before first use, and for optimal performance, follow these steps:

1. Ippakkja: Carefully remove the kettle and all packaging materials.
2. Tindif Inizjali: Before using for the first time, fill the kettle with clean water up to the MAX line. Boil the water, then discard it. Repeat this process 2-3 times to remove any manufacturing residues.
3. Pożizzjonament: Place the kettle on a firm, flat, and heat-resistant surface. Ensure it is away from edges and out of reach of children.
4. Konnessjoni tal-Enerġija: Unwind the power cord from its concealed storage at the base. Plug the power cord into a suitable electrical outlet.

Istruzzjonijiet Operattivi

Using your XECH Hydroboil Lite kettle is simple and straightforward.

1. Imla l-Kitla: Open the lid and fill the kettle with the desired amount of fresh water. Do not fill below the MIN mark or above the MAX mark (0.4 Litres capacity).
2. Agħlaq l-Għatu: Ensure the lid is securely closed. The silicone pressure release cap should be properly seated.
3. Ibda t-Togħlija: Press the power button located on the front of the kettle. The LED indicator light will illuminate, indicating that the kettle is in operation.
4. Proċess ta' togħlija: The 300W heating element will rapidly boil the water. Boiling typically takes 2-3 minutes. The silicone pressure release cap will release steam at approximately the 3-minute mark once boiling begins.
5. Itfi Awtomatiku: The kettle features boil dry protection and will automatically shut down after 5 minutes and 30 seconds if left unattended or if water levels are too low. The LED indicator will turn off.
6. Tferra: Once boiling is complete, carefully unplug the kettle from the power outlet. Hold the kettle by its cool-touch exterior and pour the hot water slowly and steadily.
7. Ħażna: After use, allow the kettle to cool down. You can then wind the power cord back into its concealed storage for compact portability.

The XECH Hydroboil Lite kettle shown in diverse environments, including a study desk, bedside table, office setting, and a travel location, demonstrating its versatility.

The compact dimensions of the XECH Hydroboil Lite kettle (21cm height, 8.5cm diameter) are illustrated by its placement within a suitcase, highlighting its suitability for travel.

Diagrams illustrating the kettle's boil dry protection and auto-shutdown feature, alongside a close-up of the silicone pressure release valve, ensuring safe operation with the lid closed.

An image demonstrating the kettle's stable base when the cable is extended, and an exploded view revealing the double-wall lining for insulation and safety.

Manutenzjoni u Tindif

Regular cleaning ensures the longevity and optimal performance of your kettle.

• Dejjem Skonnettja l-Plagg: Before cleaning, ensure the kettle is unplugged from the power outlet and has completely cooled down.
• Tindif ta' barra: Imsaħ il-barra tal-kitla b'artab, damp drapp. Tużax prodotti tat-tindif li joborxu jew spondi tal-għorik, għax jistgħu jagħmlu ħsara lill-finitura.
• Interior Cleaning (Hand Wash Only): The interior stainless steel lining can be cleaned with a soft sponge and mild dish soap. Rinse thoroughly with clean water.
• Tneħħija tal-Ġebla: Maż-żmien, id-depożiti minerali (ġebla tal-ġir) jistgħu jinbnew ġewwa l-kitla, speċjalment f'żoni b'ilma iebes. Biex tneħħi l-ġebla:
  1. Fill the kettle with a mixture of equal parts white vinegar and water (or use a commercial descaling solution according to its instructions).
  2. Let the solution soak for at least 30 minutes, or longer if the limescale is heavy. Do not boil the vinegar solution.
  3. Empty the kettle and rinse thoroughly several times with fresh water to remove any vinegar residue and smell.
  4. If necessary, boil clean water in the kettle and discard it to ensure all descaling solution is removed.
• Tgħaddix: Never immerse the kettle body, power cord, or plug in water or any other liquid.
• Tnixxif: Ensure the kettle is completely dry before storing or next use.

Issolvi l-problemi

If you encounter any issues with your XECH Hydroboil Lite kettle, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact XECH customer support.

Speċifikazzjonijiet

Garanzija u Appoġġ

For warranty information or technical support, please contact XECH customer service. Details may be available on the product packaging or the official XECH websit.

Manifattur: XECH TECHNOLOGIES PVT LTD

Ħanut tal-Marka: Visit the XECH Store on Amazon