RoboRock S8 MaxV Ultra Robot Vacuum Cleaner Instruction Manual

1. Introduzzjoni

This manual provides detailed instructions for the safe and efficient use of your RoboRock S8 MaxV Ultra robot vacuum cleaner. Please read this manual thoroughly before operating the device and retain it for future reference. This device is designed to provide automated cleaning for various floor types.

2. Karatteristiċi tal-prodott

• PreciSense LiDAR Navigation & Reactive AI 2.0 Camera System: For precise mapping and obstacle avoidance.
• Qawwa Għolja ta' Ġbid: Up to 10,000 Pa for effective dirt and debris removal, with intelligent dirt detection.
• Automatic Mop Lifting: Mop lifts automatically up to 20 mm to avoid wetting carpets.
• Auto-Drying: Mop auto-drying at 60 °C to prevent odors and mildew.
• Runtime Estiża: Sa 180 minuta ta' tindif b'ċarġ wieħed.
• Self-Cleaning Station: Automated mop washing and dustbin emptying.
• Dispenser Awtomatiku: For cleaning solution, ensuring optimal mopping performance.

3. Setup

Before first use, ensure all packaging materials are removed from the robot and the docking station. Place the docking station on a hard, flat surface against a wall, ensuring adequate space around it for the robot to maneuver.

1. Ippakkja: Oħroġ bir-reqqa l-vacuum cleaner robot u l-aċċessorji kollha mill-imballaġġ.
2. Poġġi l-Istazzjon tad-Docking: Connect the power cable to the docking station and plug it into a power outlet. Ensure there are no obstacles within 0.5 meters to either side and 1.5 meters in front of the station.
3. Iċċarġja r-Robot: Place the robot onto the docking station. The robot will automatically power on and begin charging. Fully charge the robot before its first cleaning cycle (approximately 3 hours).
4. Installa l-App: Download the RoboRock app from your mobile device's app store. Follow the in-app instructions to connect your robot to your home Wi-Fi network and complete the initial setup, including mapping your home.

Figura 3.1: The RoboRock S8 MaxV Ultra positioned in a home environment, ready for operation.

4. Istruzzjonijiet Operattivi

The RoboRock S8 MaxV Ultra can be operated via the physical buttons on the robot or through the RoboRock mobile application.

4.1 Tibda Ċiklu ta' Tindif

• Permezz tar-Robot: Press the Power button once to start a general cleaning cycle. The robot will automatically return to the docking station when cleaning is complete or when the battery is low.
• Permezz tal-App: Open the RoboRock app, select your robot, and tap 'Clean'. You can customize cleaning modes, select specific rooms, or set no-go zones.

4.2 Pawża/Tkomplija tat-Tindif

• Permezz tar-Robot: Press the Power button once during a cleaning cycle to pause. Press again to resume.
• Permezz tal-App: Use the 'Pause' and 'Resume' options in the app.

4.3 Tindif tal-post

For concentrated cleaning of a specific area, such as a spill, manually place the robot near the area and select the spot cleaning function via the app. The robot will clean a small area around its current position.

Figura 4.1: The RoboRock S8 MaxV Ultra actively cleaning a liquid spill on a hard floor surface, demonstrating its spot cleaning capability.

4.4 Skedar

Use the RoboRock app to set up cleaning schedules for automated cleaning at preferred times and days.

5. Manutenzjoni

Regular maintenance ensures optimal performance and extends the lifespan of your RoboRock S8 MaxV Ultra.

5.1 Trabbin u Filtru

• Tbattil: The self-cleaning station automatically empties the dustbin. However, periodically check the dustbin and empty it manually if needed.
• Filtru tat-Tindif: The HEPA filter should be cleaned regularly (e.g., weekly) by tapping it against a trash can to remove dust. Replace the filter every 3-6 months, or as indicated by the app.

5.2 Pinzell Prinċipali u Pinzell tal-Ġenb

• Pinzell Prinċipali: Neħħi l-għatu tal-pinzell prinċipali u erfa' l-pinzell 'il barra. Uża l-għodda tat-tindif biex tneħħi x-xagħar imħabbel u l-fdalijiet. Naddaf il-bearings tal-pinzell.
• Pinzell tal-Ġenb: Unscrew and remove the side brush. Clean any hair or debris wrapped around it. Reattach securely.

5.3 Sensuri u Kuntatti tal-Iċċarġjar

• Wipe all sensors (cliff sensors, wall sensor, bumper sensor) and charging contacts on both the robot and the docking station with a clean, dry cloth.

5.4 Mop Pad and Water Tank

• Kuxxinett tal-mopp: Remove and wash the mop pad after each mopping session. Replace worn-out mop pads.
• Tank tal-Ilma: Refill the water tank with clean water as needed. Use only recommended cleaning solutions if applicable.

6 Issolvi l-problemi

If you encounter issues with your RoboRock S8 MaxV Ultra, refer to the following common problems and solutions:

For more complex issues or error messages, consult the RoboRock app for specific guidance or contact customer support.

7. Speċifikazzjonijiet

8. Garanzija u Appoġġ

For warranty information, please refer to the documentation provided with your purchase or contact RoboRock customer support directly. The product comes with a 30-day refund/replacement return policy from the seller.

• Disponibbiltà ta' Spare Parts: Informazzjoni dwar id-disponibbiltà ta' spare parts bħalissa mhijiex disponibbli.
• Appoġġ għall-Klijent: For technical assistance, troubleshooting beyond this manual, or warranty claims, please visit the official RoboRock websit jew ikkuntattja lis-servizz tal-konsumatur tagħhom.