Bernzomatic TS4000 Trigger Start Torch Instruction Manual

Introduzzjoni

The Bernzomatic TS4000 Trigger Start Torch is designed for various applications, including soldering, brazing, and heat treating. It features instant on/off ignition, a swirl flame profile, and pressure regulation for consistent performance. This manual provides essential information for safe and effective operation, maintenance, and troubleshooting of your Bernzomatic TS4000 torch.

Image: Two Bernzomatic TS4000 Trigger Start Torches, showcasing their design and trigger mechanism.

Setup

Before operating the torch, ensure proper assembly and connection to a compatible fuel cylinder. The TS4000 torch is compatible with 14.1 oz Bernzomatic MAP-Pro fuel and 14.1 oz and 16 oz Bernzomatic Propane fuel cylinders.

Prepare the Fuel Cylinder: Ensure the fuel cylinder is upright and stable.
Attach the Torch Head: Carefully screw the torch head onto the threaded valve of the fuel cylinder. Turn clockwise until hand-tight. Do not overtighten.
Iċċekkja għal Tnixxijiet: After attaching, listen for any hissing sounds indicating a gas leak. If a leak is detected, tighten the connection. If the leak persists, disconnect and inspect the threads for damage. Do not use if a leak cannot be stopped.

Hand holding Bernzomatic TS4000 torch attached to a yellow fuel cylinder with a blue flame

Image: A hand holding the Bernzomatic TS4000 torch attached to a yellow MAP-Pro fuel cylinder, demonstrating its compact and portable setup.

Istruzzjonijiet Operattivi

The Bernzomatic TS4000 features a trigger-start ignition for ease of use and a swirl flame for efficient heating.

Tqabbid: Point the torch away from yourself and any flammable materials. Press the trigger to ignite the flame. The instant on/off ignition allows for quick starts and stops.
Flame Lock (Continuous Use): For continuous operation without holding the trigger, press the trigger to ignite, then push the flame lock button (typically a small button or lever near the trigger) while the flame is active. Release the trigger, and the flame will remain lit.
Aġġusta tal-Fjammi: The torch is pressure regulated for consistent performance, even when inverted. While there isn't a manual flame adjustment dial, the flame intensity is optimized for various tasks.
It-tifi: To turn off the torch, release the trigger. If the flame lock is engaged, press the trigger again briefly to disengage the lock, then release. Ensure the flame is completely extinguished before setting the torch down.

Bernzomatic TS4000 torch flame heating a copper pipe for soldering

Image: The Bernzomatic TS4000 torch in action, heating a copper pipe for soldering, demonstrating the precise and powerful swirl flame.

Bernzomatic TS4000 torch flame heating a metal plate

Image: The Bernzomatic TS4000 torch heating a metal plate, illustrating its effectiveness for various heating applications.

Manutenzjoni

Proper maintenance ensures the longevity and safe operation of your Bernzomatic TS4000 torch.

Tindif: Keep the torch head and nozzle clean from debris and residue. Use a soft cloth to wipe down the exterior. Do not use abrasive cleaners or solvents.
Ħażna: Always disconnect the torch head from the fuel cylinder when not in use. Store the torch and fuel cylinders in a cool, dry, well-ventilated area, away from direct sunlight, heat sources, and ignition sources. Keep out of reach of children.
Spezzjoni: Periodically inspect the torch head for any signs of damage, wear, or blockages in the nozzle. Ensure all connections are secure before each use.

Issolvi l-problemi

If you encounter issues with your Bernzomatic TS4000 torch, refer to the following common problems and solutions:

Problema	Kawża Possibbli	Soluzzjoni
It-torċa ma tixgħelx.	Fuel cylinder empty. Torch head not securely attached. Ignition mechanism dirty or faulty.	Ibdel iċ-ċilindru tal-fjuwil. Ensure torch head is hand-tight. Clean ignition area; if faulty, consider professional service or replacement.
Il-fjamma hija dgħajfa jew inkonsistenti.	Low fuel in cylinder. Żennuna parzjalment imblukkata. Operating in extremely cold conditions.	Ibdel iċ-ċilindru tal-fjuwil. Inspect and carefully clear any nozzle blockages (ensure torch is off and cool). Allow fuel cylinder to warm to room temperature.
Tnixxija ta' gass skoperta.	Loose connection between torch and cylinder. O-ring jew ħjut bil-ħsara.	Issikka l-konnessjoni. Disconnect, inspect for damage, and replace if necessary. Do not use if leak persists.

Speċifikazzjonijiet

Ditta: Bernżomatiku
Mudell: TS4000
Piż tal-oġġett: 14.1 uqija
Dimensjonijiet tal-Prodott: 10.5"T x 3"W x 3.5"Għ
Materjal: Azzar Liga
Temperatura massima: 2860 Degrees Fahrenheit (with MAP-Pro fuel)
Sors tal-Enerġija: Propane Gas / MAP-Pro Gas
Tqabbid: Trigger Start (Instant On/Off)
Tip ta' Fjammi: Swirl Flame
Karatteristiċi: Pressure Regulated for Consistent Performance when Inverted, Flame Lock Option
UPC: 014045452953

Garanzija u Appoġġ

For warranty information or product support, please refer to the official Bernzomatic webis-sit jew ikkuntattja lis-servizz tal-konsumatur tagħhom direttament. It-termini u l-kundizzjonijiet speċifiċi tal-garanzija jistgħu jvarjaw.

Visit the official Bernzomatic Store: Bernzomatic Store

	Manwal tal-Istruzzjonijiet u Gwida tas-Sigurtà tat-Torċa Bernzomatic TS3700/MT545 Istruzzjonijiet komprensivi dwar is-sigurtà, l-assemblaġġ, u gwida dwar l-operat għat-torċi li jinżammu fl-idejn Bernzomatic TS3700 u MT545. Tgħallem kif tuża t-torċa tiegħek b'mod sigur u effettiv.
	Manwal ta' Istruzzjoni u Gwida tas-Sigurtà tat-Torċa li tinżamm fl-Idejn Bernzomatic 3301 Manwal ta' struzzjonijiet komprensiv u gwida tas-sigurtà għat-torċa tal-propan li tinżamm fl-idejn Bernzomatic 3301. Tgħallem dwar l-assemblaġġ, it-tħaddim, it-twissijiet tas-sigurtà, u l-ħażna biex tiżgura użu sikur u effettiv.
	Manwal tal-Utent u Gwida tas-Sigurtà tat-Torċa tal-Butan Bernzomatic ST2000 Istruzzjonijiet komprensivi u twissijiet ta' sigurtà għat-torċa tal-butan Bernzomatic ST2000, li jkopru t-tħaddim, il-mili mill-ġdid, il-ħażna, u l-perikli potenzjali. Tinkludi informazzjoni ta' sigurtà multilingwi.
	Manwal tal-Istruzzjonijiet tal-Mikrotorċa tal-Butan Bernzomatic ST2200 Twissijiet komprensivi dwar is-sigurtà, struzzjonijiet dwar l-operat, proċeduri ta' mili mill-ġdid, u linji gwida dwar il-ħażna għall-Bernzomatic ST2200 Butane Microtorch.
	Manwal tal-Istruzzjonijiet u Gwida tas-Sigurtà tal-Mikrotorċa tal-Butan Bernzomatic ST2200 Manwal ta' struzzjonijiet komprensiv u gwida tas-sigurtà għall-Bernzomatic ST2200 Butane Microtorch. Tgħallem dwar it-tħaddim, il-mili mill-ġdid, it-twissijiet tas-sigurtà, u l-ħażna.