TONOR Wireless Microphones System
Model: TW821 - Instruction Manual
Introduzzjoni
This manual provides detailed instructions for the setup, operation, and maintenance of your TONOR Wireless Microphones System (Model: TW821). This UHF wireless system offers stable signal transmission and clear audio quality, suitable for various applications including karaoke, public speaking, and live performances. Please read this manual thoroughly before use to ensure optimal performance and longevity of your device.
Nota Importanti: The frequency range of this product is 902-928MHz. Before purchasing, please ensure the wireless frequency band you select works in your area.
Informazzjoni dwar is-Sigurtà
- This system is not compatible with laptops, iPads, mobile phones, or AV receivers.
- Each handheld microphone or bodypack transmitter requires 2 AA batteries (not included).
- Ensure proper battery polarity when inserting batteries.
- Evita li tesponi l-apparat għal temperaturi estremi, umdità, jew dawl tax-xemx dirett.
- Tippruvax tiżżarma jew issewwi l-unità int stess. Ikkuntattja persunal kwalifikat għas-servizz.
Kontenut tal-Pakkett
Jekk jogħġbok immarka l-kaxxa għall-oġġetti li ġejjin:
- 1 x Riċevitur
- 1 x Mikrofonu li jinżamm fl-idejn
- 1 x Bodypack Transmitter
- 1 x Mikrofonu tal-headset
- 1 x Lapel Microphone
- 1 x 6.35mm Cable Awdjo
- 1 x Adapter tal-Enerġija
- 1 x Manwal għall-Utent
Figure 1: All components included in the TONOR Wireless Microphones System package.
Prodott Overview
Riċevitur bla fili UHF
Figure 2: Front and back panels of the UHF Wireless Receiver.
- Panel ta' quddiem: Power switch, Channel A/B volume control knobs, LCD display for frequency and channel information.
- Panel ta 'wara: Antenna B, Mix output (6.35mm), Balanced XLR outputs (BAL B, BAL A), DC IN (power jack), Antenna A.
Trasmettitur UHF Bodypack
Figure 3: Diagram of the UHF Bodypack Transmitter features.
- Karatteristiċi: One-tap On/Off/Mute button, LCD display (shows frequency and battery level), Volume +/- buttons, SET button for frequency selection, Antenna, Professional 3-Pin Mini XLR Jack for connecting headset/lapel mic, Battery Compartment (2 AA batteries).
UHF Handheld Wireless Microphone
Figure 4: Diagram of the UHF Handheld Wireless Microphone features.
- Karatteristiċi: Rugged metal build, Shatter-resistant steel mic grille, High-quality cardioid dynamic capsule, All-metal housing, On/Off button, Channel switch button (inside battery compartment), Battery level and signal indicator on display.
Setup Istruzzjonijiet
1. Installazzjoni tal-batterija
- For Handheld Microphone: Unscrew the bottom part of the microphone to access the battery compartment. Insert 2 AA batteries, ensuring correct polarity.
- For Bodypack Transmitter: Open the battery compartment cover. Insert 2 AA batteries, ensuring correct polarity.
2. Konnessjoni tar-Riċevitur
- Connect the provided power adapter to the DC IN port on the receiver and plug it into a power outlet.
- Connect the 6.35mm audio cable from the receiver's Mix output to your mixer, PA system, or speaker. For separate channel outputs, use XLR cables (not included) from BAL A and BAL B ports.
3. Initial Pairing & Frequency Adjustment
- The system is typically pre-paired from the factory. Simply power on the receiver, then power on your handheld microphone and bodypack transmitter. They should automatically connect.
- Each UHF microphone has 15 adjustable frequencies. Up to 15 sets can be used simultaneously without interference.
- To change frequency on Handheld Mic: Access the battery compartment and use the HI/LO button.
- To change frequency on Bodypack Transmitter: Use the SET button.
4. Re-pairing Microphones (Troubleshooting)
If microphones do not connect or experience interference, follow these steps to re-pair:
- Itfi r-riċevitur.
- Turn off all microphones/bodypacks.
- Initiate pairing mode on the microphone/bodypack:
- For Handheld Mic: Hold the HI/LO button inside the battery compartment while turning on the power. The display will blink.
- For Bodypack: Turn on the mic and hold the SET button for 5 seconds until the display blinks.
- Turn on the receiver. Wait a few seconds for it to fully start.
- Pair the microphone/bodypack:
- For Handheld Mic: Press the HI/LO button once. The display will stop blinking.
- For Bodypack: Press the SET button.
- Repeat the process for each microphone/bodypack, ensuring only one is in pairing mode at a time.
- During this process, you can press the HI/LO or SET button to select a different frequency/channel. The mic and receiver will remember this setting.
It-tħaddim tas-Sistema
- Power On/Off: Use the dedicated power buttons on the receiver, handheld microphone, and bodypack transmitter.
- Kontroll tal-Volum: The receiver allows for separate volume control for each wireless microphone. The bodypack transmitter also has its own volume adjustment.
- Funzjoni Mute: The bodypack transmitter features a one-tap On/Off/Mute button.
Compatibility & Usage Scenarios
The TONOR Wireless Microphones System is designed for wide compatibility with various audio equipment and is ideal for diverse applications:
- Apparati Kompatibbli: Outdoor speakers, Karaoke machines, Power amplifiers, Mixers, PA speaker systems.
- Użi Rakkomandati: Karaoke, Home KTV, Large parties, DJ sets, Weddings, Church services, Classroom presentations, Meetings.
Figure 5: The system's wide compatibility with various audio devices.
Figura 6: Eżamples of usage scenarios for the wireless microphone system.
Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Isem tal-Mudell | TW821 |
| Piż tal-oġġett | 3.13 Liri |
| Dimensjonijiet tal-Prodott | 11.02 x 8.27 x 4.53 pulzieri |
| Fattur tal-Forma tal-Mikrofonu | Handheld, Headset, Lavalier |
| Sors tal-Enerġija | Battery Powered (2 AA batteries per mic/bodypack) |
| Materjal | Metall |
| Numru ta 'Kanali | 2 (with 15 adjustable frequencies per mic) |
| Medda ta' Frekwenzi | 902-928MHz |
| Firxa tat-Trażmissjoni | 200 ft (in open spaces) |
| Mudell Polari | Unidirezzjonali |
Issolvi l-problemi
- Ebda Ħsejjes: Ensure all microphones/bodypacks are turned on and paired. Check battery levels. Verify receiver is powered on and connected to an audio system.
- Signal Interference/Noise: Change the frequency of the affected microphone/bodypack. Ensure the receiving distance does not exceed the maximum range (200ft).
- Microphone/Bodypack Cannot Be Paired: Check if batteries are installed correctly. Follow the re-pairing steps in the Setup Instructions.
- Unstable Receiver Frequency (when using multiple groups): Each microphone or bodypack needs to be set with a unique frequency to avoid interference. Follow the re-pairing steps to set specific frequencies for each unit.
Garanzija u Appoġġ
TONOR provides a 2-year warranty for its products. For after-sales service, free replacement for products that are NOT damaged resulting from accidents, alteration, misuse, negligence, or abuse is offered. If exceeding 30 days of Amazon return policy, you can still contact support through the TONORDirect US store.
For further assistance, please refer to the contact information provided in your product's user manual or visit the official TONOR websit.
