Introduzzjoni
This manual provides essential information for the safe and effective operation of your Blackstar HT-5RH MK III 5-watt guitar tube amp head. Please read thoroughly before use.
Informazzjoni dwar is-Sigurtà
Biex tiżgura tħaddim sikur u tevita ħsara, jekk jogħġbok osserva l-linji gwida ta' sigurtà li ġejjin:
- Dejjem tiżgura l- amplifier is connected to a grounded power outlet.
- Tesponix il- amplifier għax-xita jew l-umdità.
- Tiżgura ventilazzjoni adegwata madwar il- amplifier to prevent overheating. Do not obstruct ventilation grilles.
- Refer all servicing to qualified service personnel. Risk of electric shock. Do not open the ampchassis lifier.
- Disconnect the mains power cable before cleaning or servicing.
Setup
Follow these steps to set up your HT-5RH MK III ampras lifier.
Connecting to a Speaker Cabinet
The HT-5RH MK III requires an external speaker cabinet. Ensure the speaker cabinet's impedance matches the ampoutput tal-lifier.
Image: Rear panel of the Blackstar HT-5RH MK III amplifier head, highlighting the speaker output jacks.
- Connect a speaker cable from one of the ĦRUĠIET SPEAKER on the rear panel to your speaker cabinet.
- Il- ampjoffri lifier 1 x 8 OHM OR 2 x 16 OHM u 1 x 16 OHM outputs. Match the impedance of your cabinet to the correct output jack.
- Ensure a speaker is connected before powering on the amplifier biex jipprevjeni l-ħsara.
Konnessjoni tal-Enerġija
Connect the supplied mains power cable to the DĦUL PRINĊIPALI on the rear panel and to a suitable power outlet.
Image: Rear panel of the Blackstar HT-5RH MK III amplifier head, showing the mains input.
Kontrolli u Funzjonijiet
The front panel of your HT-5RH MK III features intuitive controls for shaping your tone.
Image: Front panel of the Blackstar HT-5RH MK III amplifier head, displaying all controls.
Kontrolli tal-Panew ta' Quddiem
- Swiċċ POWER: Jaqleb il- amplifier mixgħul jew mitfi.
- 5W / 0.5W Switch: Selects between 5-watt and 0.5-watt output power for different volume requirements.
- REVERB Level: Adjusts the amount of built-in reverb effect.
- OD EQUALISATION (ISF, TREBLE, MIDDLE, BASS): Tone stack for the Overdrive channel. The ISF (Infinite Shape Feature) control shifts the tone from a classic British sound (counter-clockwise) to a more aggressive American sound (clockwise).
- OVERDRIVE (VOLUME, GAIN, VOICE, SELECT): Controls for the Overdrive channel. VOLUM adjusts the output level, QIBDA controls the amount of distortion, VUĊI selects different overdrive voicings, and AGĦŻEL switches between Clean and Overdrive channels.
- CLEAN (VOLUME, VOICE): Controls for the Clean channel. VOLUM adjusts the output level, VUĊI selects different clean voicings.
- DĦUL: Jack ta' 1/4" biex tqabbad il-kitarra tiegħek.
Konnessjonijiet tal-Panew ta' wara
Image: Rear panel of the Blackstar HT-5RH MK III amplifier head, displaying all connections.
- Awdjo USB: Jikkonnettja ma' kompjuter għal reġistrazzjoni diretta.
- SEND/RETURN (Effects Loop): For connecting external effects pedals. The LIVELL switch adjusts the effects loop sensitivity (+4dBu/-10dBV).
- SWITCH TAL-PIEDA: Connects an optional footswitch for channel switching.
- LINJA FI: 3.5mm input for connecting external audio sources like MP3 players.
- CABRIG OUTPUT (LINE OUT / PHONES): Emulated output for direct recording or headphones, with selectable cabinet simulations.
- RIŻULTATI TA 'SPEAKER: Connects to external speaker cabinets (1x8 Ohm or 2x16 Ohm, 1x16 Ohm).
- INPUT EWLENIN: Konnessjoni tal-kejbil tal-enerġija.
Istruzzjonijiet Operattivi
Operazzjoni Bażika
- Tiżgura l- amplifier is connected to a suitable speaker cabinet and power supply.
- Qabbad il-kitarra tiegħek mal- INPUT jack.
- Dawwar il- QAWWA jaqilbu għal ON. Allow a few moments for the tubes to warm up.
- Select your desired power output using the 5W / 0.5W swiċċ.
- Uża l- NADIF channel controls (VOLUM, VUĊI) jew OVERDRIVE channel controls (VOLUM, QIBDA, VUĊI, AGĦŻEL) to achieve your desired tone.
Using the Effects Loop
The effects loop allows you to integrate external effects pedals into your signal chain.
- Qabbad il- Ibgħat jack to the input of your effects pedal.
- Connect the output of your effects pedal to the RITORN jack.
- Aġġusta l- LIVELL switch (+4dBu for rack effects, -10dBV for stompboxes) to match your pedal's output.
Recording and Silent Practice
- Awdjo USB: Qabbad kejbil USB mill- amplifier to your computer. The amplifier will appear as an audio interface, allowing direct recording.
- CABRIG Output: Għal prattika siekta, qabbad il-headphones mal- CABRIG OUTPUT. This output also provides emulated cabinet tones for direct recording to a mixer or audio interface.
- MP3/Line Input: Qabbad apparat awdjo estern (eż., MP3 player, telefon) mal- LINJA IN jack biex iddoqq flimkien ma' backing tracks.
Tnaqqis tal-Qawwa
Il- 5W / 0.5W switch allows you to reduce the amplifier's output power, making it suitable for lower volume practice or recording while retaining tube tone.
Manutenzjoni
- Żomm il- amplifier clean by wiping with a dry, soft cloth.
- Evita li tesponi l- amplifier għal temperaturi jew umdità estremi.
- Iċċekkja regolarment il-konnessjonijiet tal-kejbil kollha għal twaħħil sikur.
- Tube replacement should be performed by qualified service personnel.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Ebda Ħoss | Power not on, speaker not connected, guitar cable faulty, volume low. | Check power switch, ensure speaker is connected, test guitar cable, increase volume controls. |
| Ħoss Dgħajjef jew Mgħawġa | Faulty tubes, incorrect impedance match, effects loop issue. | Consult qualified technician for tube check, verify speaker impedance, bypass effects loop to test. |
| Ħoss jew Ħoss | Ground loop, faulty cables, proximity to interference. | Try different power outlets, use shielded cables, move away from electronic devices. |
Speċifikazzjonijiet
- Mudell: HT5RHMK3
- Output Wattage: 5 Watt RMS
- Tubi: 12BH7 (Power Amp)
- Kanali: 2 (Clean, Overdrive)
- Kontrolli: Power, 5W/0.5W Switch, Reverb Level, ISF, Treble, Middle, Bass, Overdrive Volume, Gain, Voice, Select, Clean Volume, Voice.
- Inputs: Guitar Input, MP3/Line Input.
- Outputs: USB Audio, Effects Loop (Send/Return with Level), Footswitch, CabRig Output (Line Out/Headphones), Speaker Outputs (1x8 Ohm or 2x16 Ohm, 1x16 Ohm).
- Dimensjonijiet: 12.36 x 10.2 x 22.32 pulzieri
- Piż tal-oġġett: 19.94 liri
- Sors tal-Enerġija: Corded Elettriku
- Materjal: Stainless Steel
Garanzija u Appoġġ
Għal informazzjoni dwar il-garanzija u appoġġ tekniku, jekk jogħġbok irreferi għall-websajt uffiċjali ta' Blackstar. Amplifikazzjoni website or contact your local dealer. Keep your proof of purchase for any warranty claims.
Vidjows tal-Prodott
Kitarra Blackstar HT-5 Amplifier Sound Review
Video: A sound review of the Blackstar HT-5 Guitar Amplifier, demonstrating its tonal capabilities.
OriPure 15W Tube Guitar Amplifier Head OA-H15 (Seller Video)
Video: A demonstration of the OriPure 15W Tube Guitar Amplifier Head OA-H15, showcasing its features and sound. Note: This is a seller-provided video for a related product.
