Nilight Parking Curb Model 92316B Instruction Manual

1. Introduzzjoni

Thank you for choosing the Nilight Parking Curb Model 92316B. This heavy-duty rubber parking aid is designed to assist drivers in parking accurately and safely, preventing accidental damage to vehicles and property in various environments. Its robust construction and high visibility features make it suitable for garages, driveways, and commercial parking areas.

Image 1: Nilight Parking Curb product shot, showing two black rubber curbs with yellow reflective strips and included mounting hardware.

2. Karatteristiċi ewlenin

• Effortless Parking Security: Guides drivers to the ideal parking location, preventing overshooting and potential damage.
• Applikazzjonijiet Wiesgħa: Suitable for storage areas, driveways, warehouses, commercial parking lots, and shopping malls.
• Heavy-duty Material: Constructed from industrial rubber with a weight load capacity of up to 7000 lbs, resistant to tire scuffing, chips, cracks, fading, and crumbling in all weather conditions.
• Viżibilità Għolja: Features embedded high-visibility safety strips to minimize vehicle damage on impact and enhance visibility in low-light conditions.
• Easy Installation & Portability: Designed with pre-punched installation holes and includes matching expansion screws for both portable and permanent solutions.

Image 2: A white car parked in a garage with two Nilight Parking Curbs behind its rear wheels, demonstrating their high visibility.

3. Kontenut tal-Pakkett

The Nilight Parking Curb Model 92316B package typically includes:

• 2 x Nilight Heavy Duty Rubber Parking Curbs
• 4 x Expansion Screws (for installation)

4. Setup u Installazzjoni

The Nilight Parking Curb is designed for straightforward installation. Follow these steps for optimal placement and secure fastening:

1. Iddetermina l-Pjazzament: Position the parking curbs in your desired location. For garage use, ensure they are placed to stop your vehicle at a safe distance from walls or other obstacles. For parking lots, align them with parking space markings.
2. Immarka l-Punti tat-Tħaffir: Use the pre-punched holes on the parking curb as a guide to mark the drilling points on the ground.
3. Drill toqob: Using an appropriate drill bit for your surface (concrete, asphalt, etc.), drill holes at the marked points. Ensure the depth is sufficient for the expansion screws.
4. Secure Curbs: Place the parking curbs over the drilled holes. Insert the expansion screws through the curb's holes and tighten them securely into the ground.

Image 3: A collage of images showing the installation process, including drilling into the ground and securing the curb with screws.

Image 4: A diagram illustrating the dimensions of the parking curb: 22 inches (56 cm) in length, 6.3 inches (16 cm) in width, and 3.7 inches (9.5 cm) in height.

Installazzjoni Video

Video 1: This video demonstrates the installation process of the Nilight Parking Curb, showing how to position and secure it.

5. Istruzzjonijiet Operattivi

Once installed, the Nilight Parking Curb functions as a passive parking aid. Drive your vehicle slowly towards the curb until your tires make contact. The curb will provide a clear physical stop, indicating that you have reached the optimal parking position. This helps prevent accidental bumps and ensures consistent parking alignment.

Prodott Overview and Usage Video

Vidjo 2: Dan il-vidjo jipprovdi aktar minnview of the Nilight Parking Curb's features and demonstrates its use in a parking scenario.

6. Manutenzjoni

The Nilight Parking Curb is designed for durability and requires minimal maintenance:

• Tindif: Periodically clean the curbs with water and a mild detergent to remove dirt and debris, ensuring the reflective strips remain visible.
• Spezzjoni: Regularly inspect the curbs for any signs of wear, damage, or loosening of the mounting screws. Tighten any loose screws as needed.
• Reżistenza għat-temp: The industrial rubber construction is resistant to various weather conditions, but extreme temperatures or prolonged exposure to harsh chemicals should be avoided.

7 Issolvi l-problemi

• Curb is not staying in place: Ensure the expansion screws are properly installed and tightened. If the surface is uneven, consider shimming or re-drilling for a more secure fit.
• Reduced visibility of reflective strips: Clean the reflective strips thoroughly to remove any accumulated dirt or grime.
• Damage to the curb: While highly durable, severe impacts can cause damage. If the curb is significantly damaged, it is recommended to replace it to maintain effectiveness and safety.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

For warranty information or technical support regarding your Nilight Parking Curb Model 92316B, please refer to the product packaging or contact Nilight customer service directly. Contact details can typically be found on the manufacturer's official websit jew permezz tal-bejjiegħ bl-imnut tiegħek.