POWERASIA 6 Pack 4 Inch Smart LED Recessed Lighting User Manual

1. Introduzzjoni

This manual provides detailed instructions for the installation, setup, operation, and maintenance of your POWERASIA 6 Pack 4 Inch Smart LED Recessed Lighting system. This system features RGB backlight, adjustable white light from 2700K to 6000K, and smart control capabilities via a mobile application, remote control, and voice assistants.

Immaġni 1.1: Fuqview of the POWERASIA Smart LED Recessed Lighting kit components and lighting effects.

2. Informazzjoni dwar is-Sigurtà

• Always turn off power at the circuit breaker before installation, removal, or maintenance.
• Consult a qualified electrician if you are not experienced with electrical wiring.
• Do not use with a dimmer switch. These smart lights are dimmable via the app, remote, or voice control. Installing a physical dimmer switch on the circuit will cause malfunction.
• Kun żgur li l-konnessjonijiet kollha huma siguri u jikkonformaw mal-kodiċijiet elettriċi lokali.
• This product is rated for 100-120 Volts AC, 60 Hertz.
• Suitable for indoor and outdoor usage.

3. Kontenut tal-Pakkett

Ivverifika li l-komponenti kollha huma preżenti fil-pakkett tiegħek:

• Recessed Lighting Units (6x)
• Junction Boxes (6x)
• Smart Gateway Hub (1x)
• Kontroll mill-bogħod (1x)

4. Speċifikazzjonijiet

5. Installazzjoni

5.1 Qabel l-Installazzjoni

• Itfi l-enerġija mis-circuit breaker qabel tibda l-installazzjoni.
• Ensure the ceiling cutout size is approximately 4.25 inches for proper fit.

5.2 Passi ta' Installazzjoni Fiżika

1. Cut a hole in the ceiling with the advised cutout size (approximately 4.25 inches).
2. Open the junction box and connect the household wiring to the wires inside the junction box. Ensure proper polarity (Live to Live, Neutral to Neutral, Ground to Ground).
3. Close the junction box and place it into the ceiling opening.
4. Connect the recessed light fixture to the junction box using the provided connector.
5. Push the spring clips on the side of the recessed light upwards and insert the light into the ceiling opening. Release the clips to secure the light in place.

Image 5.1: Product dimensions and advised hole cutout size for installation.

6. Twaqqif u Tqabbil

6.1 Tqabbil tal-Kontroll mill-Bogħod

To pair the remote control with your lights:

1. Connect the light to the power supply. Turn the power off and then on.
2. Within 3 seconds of turning the light on, press and hold the "A+B" button or either "A" or "B" button on the remote control for 5 seconds.
3. When the light flashes, the pairing is successful.

Nota:

• The remote control can be used directly without connecting to Wi-Fi.
• Before pairing and unpairing with the remote control, you need to turn off and then turn on the light power again.

Image 6.1: Remote control pairing instructions.

6.2 App Installation and Gateway Setup

To control your lights via the Tuya Smart app:

1. Download the "Tuya Smart" app from the App Store or Google Play, or scan the QR code provided in the manual (if applicable) to install the app.
2. Ensure your phone is connected to a 2.4GHz Wi-Fi network and Bluetooth is enabled.
3. In the app, click on the "+" icon in the upper right corner.
4. Select "Wireless Gateway (Zigbee)", "Wireless Gateway (Bluetooth)" or "Multi-Mode Gateway (BLE+Zigbee)" to add the gateway.
5. The gateway to be added will automatically appear. Follow the instructions in the app to complete the pairing process.
6. Once the gateway is paired, turn on/off the recessed panel light until the app automatically searches and connects to the recessed LED light. Ensure the light is in breathing mode (flashing) during pairing.

Image 6.2: Gateway setup instructions for app control.

Image 6.3: The Smart Gateway Hub for enhanced connection stability.

6.3 Integrazzjoni tal-Kontroll tal-Vuċi

Once connected to the Tuya Smart app, you can integrate your lights with Google Assistant or Siri:

• Open the Tuya Smart app and navigate to the settings for your lights.
• Look for options to link with third-party voice assistants like Google Assistant or Siri.
• Segwi l-istruzzjonijiet fl-app biex tawtorizza l-konnessjoni.
• You can then use voice commands such as "Hey Google, turn the lights to 60% dim" or "Alexa, set the lights to music sync mode."

Image 6.4: Voice control functionality with smart assistants.

7. Istruzzjonijiet Operattivi

7.1 Basic Control (On/Off, Brightness, Color Temperature)

• Mixgħul/Mitfi: Use the remote, app, or voice command to turn the lights on or off.
• Luminożità: Adjust brightness from 1% to 100% using the app, remote, or voice commands.
• Temperatura tal-Kulur: Adjust the white light color temperature from 2700K (warm white) to 6000K (cool white) via the app, remote, or voice commands.

Image 7.1: Downlight and Nightlight mode adjustments.

7.2 Kontroll tad-Dawl ta' Wara RGB

The lights feature an RGB backlight for ambient effects:

• Access RGB color options through the Tuya Smart app or the remote control.
• Choose from a wide spectrum of colors (16 million adjustable colors).
• Explore various RGB dynamic modes and adjust their speed.
• Create and save your own DIY light modes.

Image 7.2: RGB color and dynamic mode options.

7.3 Modi ta 'Dawl

The system offers three distinct lighting modes:

• Conventional Downlight: For daily general illumination.
• Modalità Dawl bil-Lejl: A softer light setting suitable for bedrooms before sleep.
• Dawl RGB: For entertainment, festive occasions, or creating specific ambiances.

7.4 Kontroll tal-Grupp

Control multiple lights simultaneously by grouping them in the Tuya Smart app:

• In the app, select the lights you wish to group.
• Assign them to a group (e.g., "Living Room," "Bedroom").
• Control the entire group with a single command for synchronized lighting effects.

Image 7.3: Group control for multiple lights.

7.5 Skedar

Set schedules for your lights to turn on or off at specific times using the Tuya Smart app. This feature allows for automated lighting routines, such as waking up to soft light or ensuring lights are off when you leave home.

8. Manutenzjoni

• Kun żgur li l-enerġija tkun mitfija qabel it-tindif.
• Wipe the light fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• These LED lights are integrated and do not require bulb replacement.

9 Issolvi l-problemi

• Light not pairing with app: Ensure the light is in breathing mode (flashing) by turning it off and on 4 times. Confirm your phone is connected to a 2.4GHz Wi-Fi network.
• Light not responding to remote: Turn the light off and then on again before attempting to pair or unpair with the remote.
• Light returns to default white when wall switch is turned off: This is normal behavior. To retain settings, use the remote control, app, or voice assistants for control. Avoid using the physical wall switch for daily operation if you want to preserve specific light settings.
• Cannot control RGB light with Google Home/Alexa: Some voice assistants may have limited control over the RGB backlight portion. Full RGB control is typically available through the Tuya Smart app.
• Lights turning on randomly: Check for any active schedules or automations within the Tuya Smart app that might be causing this. If the issue persists, try resetting and re-pairing the lights and gateway.
• Flickering or malfunction: Ensure no physical dimmer switch is installed on the circuit. These smart lights are not compatible with external dimmers.

10. Garanzija u Appoġġ

For warranty information and technical support, please refer to the contact details provided with your purchase or visit the official POWERASIA websit. Żomm l-irċevuta tax-xiri tiegħek għal pretensjonijiet ta' garanzija.