1. Introduzzjoni
This manual provides detailed instructions for the installation, operation, and maintenance of your ARES WING Dual Monitor Stand, Model GDT1004UCP-2BK. Please read this manual thoroughly before installation and retain it for future reference.
Karatteristiċi ewlenin:
- Supports two monitors from 17 to 49 inches, with a maximum weight capacity of 44 lbs per arm.
- Features industrial-grade gas springs for smooth and stable adjustments.
- Offers flexible adjustability including -50° to +20° tilt, ±90° swivel, and 360° rotation.
- Integrated base with USB-A (5V/2A) and USB-C (5V/2A) ports for convenient device charging and data transmission.
- Designed for easy installation with C-clamp or grommet mounting options.
- Compatible with VESA patterns 75x75mm and 100x100mm.
Immaġni 1.1: Fuqview of the ARES WING Dual Monitor Stand, including mounting options and USB connectivity.
2. Informazzjoni dwar is-Sigurtà
- Ensure all components are securely fastened before attaching monitors.
- Do not exceed the maximum weight capacity of 44 lbs per arm.
- Verify your monitor's VESA pattern and weight before installation.
- Adjust gas spring tension carefully to match monitor weight. Incorrect tension can cause monitors to drop or spring up unexpectedly.
- Żomm it-tfal u l-annimali domestiċi 'l bogħod miż-żona tal-installazzjoni.
- If your monitor lacks VESA holes, a separate VESA adapter is required.
3. Kontenut tal-Pakkett
Please verify that all parts are present and undamaged. If any parts are missing or damaged, contact customer support.
- Monitor Stand Pole
- Dual Monitor Arms (2 units)
- C-Clamp Bażi tal-Immuntar
- Grommet Mounting Base
- VESA Plates (2 units)
- Kejbil USB-A għal USB-A
- USB-C għal USB-C Cable
- Kit tal-Ħardwer (viti, woxers, ċwievet Allen)
- Manwal ta' Istruzzjoni
4. Setup u Installazzjoni
4.1 Check Monitor and Desk Compatibility
Before proceeding, ensure your monitors and desk meet the following requirements:
- Daqs tal-Monitor: 17 sa 49 pulzier.
- Piż tal-monitor: 4.4 lbs to 44 lbs per arm.
- Mudell VESA: 75x75mm or 100x100mm. If your monitor does not have VESA holes or requires a different pattern (e.g., Samsung Odyssey G9), a VESA adapter must be purchased separately.
- Ħxuna tal-iskrivanija (C-Clamp): 0.5 sa 1.8 pulzier.
- Desk Thickness (Grommet): 0.5 sa 2.0 pulzier.
- Desk Edge Width (C-Clamp): Minimum 2.56 inches (65mm) for stable clamping.
Image 4.1: Monitor and desk compatibility guidelines.
4.2 Mounting the Base to the Desk
Choose either C-clamp or Grommet installation based on your desk type.
C-Clamp Installazzjoni:
- Waħħal is-C-clamp base to the edge of your desk.
- Issikka l-clamp screw until the base is firmly secured to the desk. Ensure it is stable and does not wobble.
Installazzjoni ta' grommet:
- Jekk l-iskrivanija tiegħek għandha toqba tal-grommet, daħħal il-bażi tal-grommet mit-toqba.
- Secure the base from underneath the desk using the provided plate and nut.
Image 4.2: Two methods for mounting the stand base to a desk.
4.3 Assembling the Arms
- Slide the monitor arms onto the main pole.
- Adjust the height of each arm to your desired position and secure them using the locking mechanism.
4.4 Attaching Monitors to VESA Plates
- Attach the VESA plates to the back of your monitors using the appropriate screws from the hardware kit. Ensure the VESA holes are central on the monitor for optimal balance.
- For ultrawide or curved monitors, ensure the VESA plate is securely attached and consider any specific manufacturer recommendations for mounting.
Image 4.3: Quick-release VESA plate installation.
4.5 Mounting Monitors to Arms
- Carefully slide the VESA-mounted monitors onto the arms' VESA brackets.
- Secure the monitors in place using the quick-release mechanism or screws as indicated in the hardware instructions.
4.6 Aġġustament tat-Tensjoni tal-Mola tal-Gass
The gas springs need to be adjusted to match the weight of your monitors for proper movement and stability.
- Position the arm horizontally.
- Use the provided Allen key to adjust the tension screw on each arm.
- Dawwar lejn il-lemin if the arm drops (to increase tension for heavier monitors).
- Dawwar lejn l-arloġġ if the arm rises (to decrease tension for lighter monitors).
- Adjust until the arm stays in position when released.
Image 4.4: Gas spring tension adjustment.
4.7 Ġestjoni tal-Cable
Route your monitor and power cables through the integrated cable management channels on the arms for a tidy setup.
- Push the cable cover upward first, then pull it off to open the channel. Do not force it, as this may cause damage.
- Route cables through the arms.
- Snap the cable covers back in place and push down to secure them.
Image 4.5: Cable management steps.
4.8 Konnessjoni tal-Port USB
Connect the integrated USB-A and USB-C cables from the stand's base to your computer's corresponding USB ports to enable charging and data transmission functionality.
Image 4.6: Smart Base with USB ports for charging and data.
5. Operating the Monitor Stand
Once installed and adjusted, your ARES WING Dual Monitor Stand offers a range of motion for optimal viewkumdità.
Image 5.1: Versatile positioning and adjustment ranges.
5.1 Adjusting Monitor Position
- Aġġustament Għoli: Gently push or pull the monitor arm to raise or lower the monitor along the main pole. The gas spring will assist in holding the position. Maximum height is 27.9 inches.
- Estensjoni/Ritrazzjoni: Extend or retract the monitor arms to adjust the distance of your monitors from your viewing position. Maximum extension is 22.4 inches.
- Mejjel: Tilt your monitor screen -50° to +20° vertically to reduce glare and find your preferred viewing angle. For ultrawide monitors, ensure the tilt mechanism is loosened sufficiently before tilting.
- Dawwar: Swivel the monitor ±90° horizontally to share your screen or change viewing orjentazzjoni.
- Rotazzjoni: Rotate your monitor 360° from landscape to portrait mode.
Immaġni 5.2: Dettaljata view of full adjustability options.
5.2 Various Screen Combinations
The flexible design allows for multiple monitor configurations, including stacked or side-by-side arrangements, to suit your workflow or gaming setup.
Immaġni 5.3: Eż.amples of various screen combinations.
6. Manutenzjoni
- Tindif: Imsaħ l-istand b'ċarruta ratba, damp drapp. Evita prodotti tat-tindif jew solventi li joborxu.
- Kontrolli perjodiċi: Iċċekkja perjodikament il-viti u l-konnessjonijiet kollha biex tiżgura li jibqgħu ssikkati u siguri.
- Gas Spring Longevity: The industrial-grade gas springs are tested for over 20,000 cycles, ensuring long-term durability with daily use.
Image 6.1: Gas spring durability information.
7 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Monitor arm drops or rises unexpectedly. | Gas spring tension is not correctly adjusted for monitor weight. | Adjust the gas spring tension using the provided Allen key (refer to Section 4.6). Increase tension for heavier monitors, decrease for lighter ones. |
| Monitor is wobbly or unstable. | Bażi clamp/grommet not securely tightened; VESA plate not properly attached; monitor weight exceeds capacity. | Żgura li l-iskrivanija clamp or grommet is fully tightened. Verify VESA plate screws are secure. Confirm monitor weight is within the 44 lbs limit per arm. |
| USB ports are not functioning. | USB cables from the stand are not connected to the computer; faulty cable or port. | Check that the USB-A and USB-C cables from the stand's base are securely connected to your computer. Try different USB ports on your computer or test with another device. |
| Difficulty tilting ultrawide monitors. | Il-vit tal-mekkaniżmu tal-inklinazzjoni huwa ssikkat wisq. | Loosen the screw on the tilt mechanism until smooth tilting is achieved. |
8. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | GDT1004UCP-2BK |
| Kompatibilità tad-Daqs tal-Monitor | 17 - 49 pulzieri |
| Kapaċità tal-Piż (għal kull driegħ) | 4.4 lbs - 44 lbs |
| Kompatibilità VESA | 75x75mm, 100x100mm |
| Tip ta 'Immuntar | C-Clamp (0.5-1.8" desk thickness), Grommet (0.5-2.0" desk thickness) |
| Materjal | Aluminju |
| Aġġustament Massimu tal-Għoli | 27.9 pulzieri |
| Estensjoni Massima tad-Driegħ | 22.4 pulzieri |
| Medda Mejjel | -50° sa +20° |
| Medda li ddur | ± 90° |
| Medda ta' Rotazzjoni | 360° |
| Portijiet USB integrati | 1x USB-A (5V/2A), 1x USB-C (5V/2A) |
| Piż tal-oġġett | 16.85 liri |
| Dimensjonijiet tal-Pakkett | 16.89 x 12.17 x 4.69 pulzieri |
Image 8.1: Weight capacity demonstration.
9. Garanzija u Appoġġ
ARES WING provides professional support for its products.
- Garanzija: The product includes a 3-year warranty.
- Appoġġ għall-Klijent: If you encounter any issues during use, ARES WING offers one-on-one installation guidance, replacement parts, or monitor arm replacement services. Please contact our customer support team for assistance.
