CREWORKS 2L Digital Ultrasonic Cleaner (Model SX-DUCBK02US) Instruction Manual

1. Istruzzjonijiet Importanti dwar is-Sigurtà

Please read and understand all safety instructions before operating the CREWORKS Ultrasonic Cleaner. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Żarmax: Never attempt to open or repair the unit yourself. Refer all servicing to qualified personnel.
• Do not use unattended: Always supervise the unit during operation.
• Always use sufficient fluid: Ensure the cleaning tank is filled with an appropriate amount of cleaning solution before turning on the unit. Operating without fluid can damage the transducer.
• Unplug before filling & draining: Always disconnect the power cord from the outlet before adding or removing cleaning solution from the tank.
• Sigurtà Elettrika: Do not immerse the main unit in water or other liquids. Keep the power cord away from heated surfaces.
• Sigurtà tas-Sħana: The heating function can make the tank and solution hot. Exercise caution to prevent burns.
• Ventilazzjoni: Operate the unit in a well-ventilated area, especially when using certain cleaning solutions.

This image displays the CREWORKS 2L Digital Ultrasonic Cleaner, highlighting the control panel and the yellow warning label with key safety reminders.

2. Prodott Aktarview

The CREWORKS 2L Digital Ultrasonic Cleaner utilizes high-frequency sound waves to create cavitation bubbles in a liquid, providing thorough cleaning for various items. It features a digital control panel for precise settings, a heating function, and specialized modes for optimal cleaning.

2.1 Komponenti

• Unità Prinċipali: Houses the ultrasonic transducer, heating element, and control circuitry.
• Tank tal-Azzar li ma jsaddadx: 2-liter capacity, made from durable 304 stainless steel.
• Għatu: Helps contain sound and prevent evaporation.
• Basket tat-Tindif: Designed to hold items during cleaning, preventing them from resting directly on the tank bottom.
• Korda tal-Enerġija: Għall-konnessjoni tal-unità ma' sokit elettriku.

2.2 Karatteristiċi ewlenin

• Panel tal-Kontroll Diġitali: Intuitive interface for setting time and temperature.
• Degas Mode: Removes dissolved gases from the cleaning solution, enhancing cavitation efficiency and preventing oxidation.
• Modalità Ġentili: Reduces ultrasonic power for cleaning delicate items, protecting fragile surfaces.
• Funzjoni tat-tisħin: Accelerates the cleaning process by warming the solution (adjustable from 68°F to 176°F).
• Timer: Adjustable cleaning cycles up to 99 minutes.
• Kostruzzjoni Durabbli: 304 stainless steel tank and basket for longevity and corrosion resistance.

This image illustrates the key internal and external features of the ultrasonic cleaner, including the user-friendly digital control panel, the robust stainless steel tank, safety fuses, and ventilation holes for reliable performance.

This graphic demonstrates the robust construction of the cleaning tank, highlighting the use of food-grade 304 stainless steel for durability, corrosion resistance, and a thickness of 0.04 inches.

3. Setup

1. Ippakkja: Neħħi bir-reqqa l-apparat tat-tindif ultrasoniku u l-aċċessorji kollha mill-imballaġġ. Iċċekkja għal kwalunkwe ħsara.
2. Pjazzament: Place the unit on a stable, level, and dry surface. Ensure adequate ventilation around the unit.
3. Imla t-Tank: Ensure the unit is unplugged. Fill the stainless steel tank with an appropriate cleaning solution. The liquid level should be between the MIN and MAX marks (if present), or at least cover the items to be cleaned. Do not overfill.
4. Qabbad l-Enerġija: Ipplaggja l-korda tad-dawl fi żbokk elettriku ertjat.

4. Istruzzjonijiet Operattivi

The digital control panel allows for precise control over cleaning parameters.

4.1 Control Panel Overview

The control panel features digital displays for temperature and time, along with buttons for power, temperature adjustment, Degas mode, Gentle mode, and time adjustment.

• Buttuna tal-Qawwa: Ixgħel / itfi l-unità.
• Buttuna TEMP: Activates/deactivates the heating function. Use the up/down arrows to adjust the target temperature.
• DEGAS Button: Activates the Degas mode.
• GENTLE Button: Activates the Gentle mode.
• Buttuna ĦIN: Activates/deactivates the ultrasonic cleaning function. Use the up/down arrows to adjust the cleaning duration.

4.2 Operazzjoni Bażika

1. Ipprepara l-Oġġetti: Place items to be cleaned into the cleaning basket. Ensure items are not touching each other or the bottom of the tank directly.
2. Place Basket: Carefully lower the basket with items into the cleaning solution.
3. Qawwa Mixgħul: Agħfas il-buttuna Power biex tixgħel l-unità.
4. Temperatura Issettjata (Mhux obbligatorja): If heating is desired, press the TEMP button and use the up/down arrows to set the target temperature (68°F to 176°F). The unit will begin heating. Allow time for the solution to reach the desired temperature.
5. Degas the Solution (Recommended): For optimal cleaning, especially with fresh solution, press the DEGAS button. This removes air bubbles from the solution, improving cavitation. Run Degas mode for 5-10 minutes.
6. Issettja l-Ħin tat-Tindif: Press the TIME button and use the up/down arrows to set the desired cleaning duration (1 to 99 minutes).
7. Ibda t-Tindif: The ultrasonic cleaning will start automatically after setting the time. The timer will count down.
8. Gentle Mode (Optional): If cleaning delicate items, press the GENTLE button to reduce the ultrasonic intensity. This can be activated before or during a cleaning cycle.
9. Tmiem taċ-ċiklu: The unit will stop automatically when the timer reaches zero.
10. Neħħi l-Oġġetti: Unplug the unit. Carefully lift the basket out of the tank. Rinse cleaned items with clean water and dry them thoroughly.

This image illustrates how Degassing Mode removes gases from the tank to prevent oxidation and enhance cleaning, and how Gentle Mode effectively reduces cleaning intensity to protect delicate items by modifying sound pressure waves.

5. Manutenzjoni

Manutenzjoni xierqa tiżgura l-lonġevità u l-prestazzjoni ottimali tal-cleaner ultrasoniku tiegħek.

• Tnixxija: Always unplug the unit before draining the cleaning solution. Use the drain valve (if present) or carefully pour out the solution.
• Tindif tat-Tank: After each use, rinse the stainless steel tank with clean water. Wipe the interior and exterior with a soft cloth. Do not use abrasive cleaners or scrubbers.
• Tindif ta' barra: Imsaħ il-parti ta 'barra tal-unità b'annunzjaamp drapp. Evita li l-ilma jidħol fil-pannell tal-kontroll jew fil-komponenti elettriċi.
• Ħażna: Store the unit in a cool, dry place with the lid slightly ajar to allow for air circulation.
• Sostituzzjoni tas-Soluzzjoni: Replace cleaning solution regularly, especially if it becomes visibly dirty or its cleaning effectiveness diminishes.

6 Issolvi l-problemi

For issues not listed above, or if troubleshooting steps do not resolve the problem, please contact CREWORKS customer support.

7. Speċifikazzjonijiet

This image provides a visual representation of the unit's overall dimensions, the internal tank dimensions, and the cleaning basket dimensions, aiding in understanding the product's physical specifications.

8. Garanzija u Appoġġ

CREWORKS provides a 1-Year Promise for this ultrasonic cleaner, ensuring quality and reliability. For any questions, technical assistance, or warranty claims, please contact our Servizz tal-Klijent 24/7.

Please refer to your purchase documentation or the official CREWORKS website for specific contact information and detailed warranty terms.