MLOVE P1 Small Waterproof Bluetooth Speaker User Manual

1. Prodott Aktarview

The MLOVE P1 is a compact and portable Bluetooth speaker designed for versatile audio enjoyment. It features 20W sound output, IPX7 waterproofing, LED lights, a Micro SD card slot, USB-C charging, and TWS (True Wireless Stereo) functionality for connecting two speakers.

Image: MLOVE P1 speaker, showcasing id-disinn kompatt tiegħu.

Kontenut tal-Pakkett:

• 1 x MLOVE P1 Portable Speaker
• 1 x Cable tal-Iċċarġjar USB-C
• 1 x Lanyard
• 1 x Manwal għall-Utent

2. Setup

2.1 Iċċarġjar tal-Ispeaker

Before first use, fully charge the speaker. Connect the provided USB-C cable to the speaker's charging port and the other end to a USB power adapter (not included). The LED indicator will show charging status. A full charge takes approximately 2.5 hours.

Image: Close-up of the speaker's USB-C charging port and Micro SD card slot.

2.2 Power On/Off

• Biex tixgħel: Agħfas u żomm il-buttuna tal-Enerġija (U) għal 2-3 sekondi.
• Biex titfi: Agħfas u żomm il-buttuna tal-Enerġija (U) għal 2-3 sekondi.

2.3 Tqabbil tal-Bluetooth

1. Ensure the speaker is powered on and in Bluetooth pairing mode (LED will flash).
2. Fuq l-apparat tiegħek (smartphone, tablet, eċċ.), attiva l-Bluetooth u fittex apparati disponibbli.
3. Select "MLOVE P1" from the list.
4. Once paired, the speaker will emit a confirmation sound, and the LED will remain solid.

Tqabbil ta' 2.4 TWS (Stereo Wireless Veru)

To achieve a stereo sound experience, you can pair two MLOVE P1 speakers together.

1. Ensure both MLOVE P1 speakers are powered on and not connected to any other Bluetooth device.
2. Fuq kelliem wieħed, agħfas darbtejn il-buttuna tal-Qawwa (U). Se jidħol fil-modalità ta' tqabbil tat-TWS.
3. Iż-żewġ kelliema jikkonnettjaw ma' xulxin awtomatikament. Ħoss ta' konferma jindika tqabbil b'suċċess tat-TWS.
4. Ladarba t-TWS ikun imqabbad, qabbad l-apparat tiegħek ma' wieħed mill-ispikers permezz tal-Bluetooth kif deskritt fit-taqsima 2.3.

Image: Two MLOVE P1 speakers set up for True Wireless Stereo (TWS) with a laptop.

3. Istruzzjonijiet Operattivi

3.1 Funzjonijiet tal-buttuni

Image: Diagram showing the control buttons on the MLOVE P1 speaker.

• Power Button (U): Press and hold to Power On/Off. Double-press for TWS pairing.
• Buttuna tal-Modalità (M): Short press to switch between Bluetooth mode and Micro SD card mode.
• Play/Pause Button (►||): Short press to Play/Pause music.
• Volum Down (-) / Track Preċedenti: Short press for Volume Down. Long press for Previous Track.
• Volum 'il fuq (+) / Track Li jmiss: Short press for Volume Up. Long press for Next Track.

3.2 Daqq tal-Mużika

• Modalità Bluetooth: After successful pairing, music from your connected device will play through the speaker.
• Modalità Karta Mikro SD: Insert a Micro SD card (up to 32GB, FAT32 format) with audio files into the slot. The speaker will automatically switch to Micro SD mode and begin playback. Press the Mode button (M) to switch between modes if needed.

3.3 Dwal LED

The speaker features auto-changing colorful LED lights that enhance the listening experience. These lights cycle through various colors automatically.

4. Manutenzjoni

4.1 Tindif

Imsaħ il-kelliem b 'soft, damp drapp. Tużax prodotti tat-tindif li joborxu, alkoħol, jew solventi kimiċi, għax dawn jistgħu jagħmlu ħsara lill-wiċċ.

4.2 Ħażna

Aħżen l-ispiker f'post frisk u niexef 'il bogħod mix-xemx diretta u minn temperaturi estremi. Jekk taħżnu għal perjodu estiż, iċċarġja l-batterija sa madwar 50% kull ftit xhur biex iżżomm il-batterija f'saħħitha.

4.3 Waterproof Guidelines (IPX7)

The MLOVE P1 speaker is IPX7 waterproof, meaning it can be immersed in water up to 1 meter (3 feet) for 30 minutes. Ensure the charging port cover is securely closed before exposing the speaker to water. Avoid prolonged submersion or exposure to saltwater/chlorinated water, which may degrade seals over time. After water exposure, dry the speaker thoroughly before charging.

Image: MLOVE P1 speaker in a bathroom, illustrating its IPX7 waterproof capability.

5 Issolvi l-problemi

• L-ispiker ma jixgħelx: Kun żgur li l-batterija hija ċċarġjata. Qabbad l-ispiker ma' sors ta' enerġija billi tuża l-kejbil USB-C.
• Ma tistax tqabbad permezz tal-Bluetooth:
  1. Kun żgur li l-ispiker jinsab fil-modalità ta' tqabbil (l-LED jteptep).
  2. Kun żgur li l-Bluetooth huwa attivat fuq it-tagħmir tiegħek.
  3. Mexxi l-ispiker eqreb lejn l-apparat tiegħek.
  4. Forget "MLOVE P1" from your device's Bluetooth list and try pairing again.
  5. Ibda mill-ġdid kemm il-kelliem kif ukoll it-tagħmir tiegħek.
• Ebda ħoss:
  1. Iċċekkja l-livelli tal-volum kemm fuq l-ispiker kif ukoll fuq l-apparat konness tiegħek.
  2. Kun żgur li l-ispiker huwa mqabbad sew.
  3. If using a Micro SD card, ensure it is inserted correctly and contains compatible audio files.
• It-tqabbil tat-TWS ifalli:
  1. Ensure both speakers are fully charged and not connected to any other Bluetooth device.
  2. Try resetting both speakers by powering them off and on, then attempt TWS pairing again.

6. Speċifikazzjonijiet

7. Garanzija u Appoġġ

MLOVE is committed to providing quality products and customer satisfaction.

Image: MLOVE brand logo.

Informazzjoni dwar il-garanzija:

• Ritorn ta' 30 Ijiem: Eligible for return within 30 days of purchase.
• Sostituzzjoni ta' 90 Jum: Product replacement available within 90 days for manufacturing defects.
• 360 Jum Garanzija: Kopertura ta' garanzija komprensiva għal 360 jum mid-data tax-xiri.

Appoġġ għall-Klijent:

For any questions, technical assistance, or warranty claims, please contact MLOVE customer support. We offer 24x7 support, including weekends.

Please refer to your purchase platform or the MLOVE official websit għad-dettalji tal-kuntatt.