Vormooi 64GB Digital Voice Recorder EB1 Instruction Manual

1. Introduzzjoni

Thank you for choosing the Vormooi 64GB Digital Voice Recorder EB1. This compact and powerful device is designed for high-quality audio recording in various settings, including classes, lectures, and meetings. With its large storage capacity and long battery life, it provides a reliable solution for capturing important audio. This manual will guide you through the setup, operation, and maintenance of your new voice recorder.

2. Prodott Aktarview

Figure 1: Key Features of the Vormooi EB1 Digital Voice Recorder.

The Vormooi EB1 Digital Voice Recorder features a durable zinc alloy casing and a compact design. It is equipped with a professional 2159 recording chip and DSP digital noise cancellation for clear audio capture. Key specifications include:

• Memorja: 64GB, capable of storing up to 750 hours of 384kbps recording files.
• Batterija: Built-in 300mAh battery, providing 40-45 hours of continuous recording after a 2.5-hour full charge.
• Format tar-reġistrazzjoni: WAV.
• Konnettività: Micro USB 3.0 Type B, compatible with Personal Computers, Smartphones, and macOS.
• Dimensjonijiet: Madwar 0.23 x 1.25 x 2.10 pulzieri (6 x 32 x 52 mm).
• Piż: 21 gramma.

3. Kontenut tal-Pakkett

Jekk jogħġbok iċċekkja l-pakkett għall-oġġetti li ġejjin:

• Vormooi 64GB Digital Voice Recorder EB1
• Iċċarġjar USB/Kejbil tad-Data
• Manwal għall-Utent

4. It-Tqassim u l-Kontrolli tal-Apparat

Figure 2: Vormooi EB1 Digital Voice Recorder Layout.

Familiarize yourself with the physical components of your recorder:

• Swiċċ mixgħul / mitfi: Used to power the device on and off, and to start/save recordings.
• Dawl Indikatur: Displays device status (e.g., recording, charging).
• Port USB: Għall-iċċarġjar u l-konnessjoni ma' kompjuter għat-trasferiment tad-dejta.
• Toqba tal-lanyard: Biex twaħħal lanyard għall-portabbiltà.

5. Setup

5.1 Iċċarġjar tal-Apparat

Figure 3: Charging the Voice Recorder.

Before first use, fully charge the recorder. Connect the device to a USB power source (e.g., computer USB port, USB wall adapter) using the provided USB cable. A full charge typically takes approximately 2.5 hours.

5.2 Issettjar tal-Ħin

To ensure accurate timestamps on your recordings, synchronize the recorder's time with your computer's system time:

1. Ensure the recorder is turned OFF before connecting it to your computer.
2. Connect the recorder to your computer via the USB cable. It will appear as a 'USB DISK'.
3. Open the 'USB DISK' drive.
4. Locate and open the folder named 'Settime'.
5. Inside the 'Settime' folder, run the application named 'SetDigitRecorderTm'. This application will automatically synchronize the recorder's time with your computer's system time.
6. Once synchronization is complete, safely eject the recorder from your computer.

Note: macOS does not support using this method to modify the time.

5.3 Activating Voice Activation (VOR)

The voice activation function is OFF by default. To enable or adjust it:

1. Ensure the recorder is turned OFF before connecting it to your computer.
2. Connect the recorder to your computer via the USB cable. It will appear as a 'USB DISK'.
3. Open the 'USB DISK' drive.
4. Sib il- file named 'RECSET.txt'.
5. Copy 'RECSET.txt' to your computer's desktop.
6. Open the 'RECSET.txt' file on your desktop using a text editor (e.g., Notepad on Windows, TextEdit on macOS).
7. Look for the line that begins with 'Vor'. The default setting is 'Vor:0', which means voice activated mode is off. To enable it, change 'Vor:0' to 'Vor:1' (or a value between 1-7 for sensitivity, where 7 is most sensitive).
8. You can also adjust the recording sensitivity ('Gain') and bitrate ('Bit') in this file. It is generally not recommended to modify the bitrate unless you understand the implications.
9. Save the changes to 'RECSET.txt'.
10. Delete the original 'RECSET.txt' file from the 'USB DISK'.
11. Copy the modified 'RECSET.txt' file from your desktop back to the 'USB DISK'.
12. Safely eject the recorder from your computer.
13. Restart the recorder by sliding the ON/OFF switch to OFF, then back to ON, for the changes to take effect.

6. Istruzzjonijiet Operattivi

6.1 Power On/Off

To power on the device, slide the ON/OFF switch to the 'ON' position. To power off, slide it to the 'OFF' position.

6.2 Tibda Reġistrazzjoni

With the device powered off, slide the ON/OFF switch to the 'ON' position. The purple indicator light will be solid for 4-5 seconds, then the red light will flash 3 times, indicating that recording has started.

6.3 Saving a Recording

To stop and save the current recording, slide the ON/OFF switch to the 'OFF' position. The recording file will be automatically saved to the device's memory.

6.4 Connecting to a Computer and Playing Recordings

Figure 4: Connecting the Recorder via USB/OTG.

To access and play your recordings:

1. Ensure the recorder is turned OFF before connecting it to your computer or smartphone.
2. Connect the recorder to your computer using the provided USB cable. For smartphones, an OTG adapter (not included) may be required. The device will appear as a 'USB DISK'.
3. Open the 'USB DISK' drive.
4. Navigate to the folder named 'RECORD'. Your WAV recording files will be stored here.
5. For Windows users, it is recommended to use 'Windows Media Player' for playback, as 'Groove Music' may not support WAV recordings from this device. For macOS users, you can typically click on the recording file to play it directly.
6. After accessing your files, safely eject the recorder from your computer or smartphone.

7. Manutenzjoni

To ensure the longevity and optimal performance of your Vormooi Digital Voice Recorder:

• Żomm l-apparat niexef u 'l bogħod mill-umdità.
• Evita li tesponi l-apparat għal temperaturi estremi (sħan jew kesħin).
• Naddaf l-apparat b'ċarruta ratba u niexfa. Tużax prodotti tat-tindif likwidi jew solventi.
• Regularly back up your important recordings to a computer or cloud storage to prevent data loss.
• Evita li twaqqa’ jew tissuġġetta l-apparat għal impatti qawwija.

8 Issolvi l-problemi

If you encounter issues with your Vormooi Digital Voice Recorder, please refer to the following common solutions:

• Apparat mhux qed jixgħel: Ensure the battery is charged. Connect to a USB power source and allow it to charge for at least 30 minutes before attempting to power on again.
• Ma nistax nirrekordja: Check if the device has sufficient storage space. Ensure the ON/OFF switch is fully in the 'ON' position.
• Kwalità fqira tar-reġistrazzjoni: Ensure the microphone is not obstructed. If Voice Activation (VOR) is enabled, adjust the sensitivity settings in 'RECSET.txt'. Ensure the device is placed in an optimal position for sound capture.
• Apparat mhux rikonoxxut mill-kompjuter: Ensure the recorder is turned OFF before connecting. Try a different USB port or cable. Restart your computer.
• Cannot play WAV files fuq Windows: Use 'Windows Media Player' instead of 'Groove Music'.
• Voice Activation not working: Verify that 'Vor' is set to a value between 1-7 in 'RECSET.txt' and that the recorder was restarted after saving the changes.

If problems persist, please refer to your order history and contact the seller for support.

9. Speċifikazzjonijiet

10. Garanzija u Appoġġ

Vormooi is committed to providing quality products and customer satisfaction. If you encounter any issues or have questions regarding your Vormooi Digital Voice Recorder EB1, please contact the seller through your order history on the platform where you made the purchase. Provide your order details for prompt assistance.