efperfect Modern 3 Lights Glass Pendant Light Instruction Manual

Introduzzjoni

Grazzi tax-xiriasing the efperfect Modern 3 Lights Glass Pendant Light, model EF1408736001. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.

This pendant light features three distinct smoky gray glass lampshades, designed to enhance various indoor spaces with a blend of modern and vintage estetika.

Figure 1: The efperfect Modern 3 Lights Glass Pendant Light, showcasing its design in a bright room.

Figure 2: The pendant light enhancing a dining room setting.

Figure 3: The pendant light providing illumination in a bedroom.

Informazzjoni dwar is-Sigurtà

• TWISSIJA: To avoid electric shock, always disconnect power at the main circuit breaker or fuse box before installation or servicing.
• All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with electrical wiring.
• Ensure the fixture is securely mounted to a structural component of the ceiling.
• Taqbiżx il-wat massimutage speċifikat għall-bozoz.
• Immaniġġja l-komponenti tal-ħġieġ b'attenzjoni biex tevita li jinkisru.
• Dan l-apparat huwa ddisinjat għall-użu fuq ġewwa biss.

Kontenut tal-Pakkett

Ivverifika li l-komponenti kollha huma preżenti u mhux imħassra qabel ma tipproċedi bl-installazzjoni.

• Ceiling Canopy with integrated wiring
• 3 Ħġieġ Lampshades (various shapes and sizes)
• Mounting Hardware (crossbar, mounting screws, wire connectors)
• Adjustable Hanging Wires (pre-attached to canopy and lamp detenturi)
• Manwal ta' Istruzzjoni

Note: E26 light bulbs are not included and must be purchased separately.

Speċifikazzjonijiet

Setup u Installazzjoni

Installazzjoni professjonali hija rakkomandata. Kun żgur li l-provvista tal-enerġija hija MITFIJA fis-circuit breaker qabel ma tipproċedi.

1. Ipprepara għall-Installazzjoni

• Turn off electricity at the main fuse box or circuit breaker.
• Carefully unpack all components and inspect for any damage.
• Gather necessary tools (screwdriver, wire strippers, electrical tape, ladder).

2. Mount the Crossbar

Attach the mounting crossbar to the junction box in your ceiling using the provided screws. Ensure it is securely fastened.

Figure 4: Installation diagram illustrating the mounting process and electrical connections.

3. Konnessjonijiet tal-Wajer

• Qabbad il-wajer tal-ert tal-apparat tad-dawl (ġeneralment ram mikxuf jew aħdar) mal-wajer tal-ert tad-dar.
• Connect the fixture's neutral wire (usually white) to the house neutral wire (white).
• Connect the fixture's live wire (usually black) to the house live wire (black).
• Secure all connections with wire connectors and wrap with electrical tape for added safety.

Figura 5: Dettaljat view of the ceiling canopy and wiring points before final installation.

4. Secure the Ceiling Canopy

Carefully tuck all wires into the junction box. Align the ceiling canopy with the mounting screws on the crossbar and secure it with the provided decorative nuts or screws.

5. Adjust Hanging Wires

The hanging wires for each glass globe are adjustable. To adjust the length, gently push the small pin on the canopy where the wire enters, then pull or push the wire to the desired length. Release the pin to lock the wire in place. Ensure the wires are taut and the globes hang evenly or as desired.

Figure 6: The three distinct glass shades with adjustable hanging wires, allowing for customized arrangement.

6. Installa l-Bozoz tad-Dawl

Screw E26 base bulbs (not included) into each lamp holder. Ensure bulbs are fully seated. The fixture supports incandescent, LED, CFL, and halogen bulbs up to 60W each. For dimming functionality, use dimmable E26 bulbs and a compatible dimmer switch (not included).

Figure 7: Detail of an E26 bulb correctly installed within a glass shade.

7. Attach Glass Shades

Carefully attach each glass lampshade to its respective lamp holder according to the design. Ensure they are securely fastened but do not overtighten.

Figure 8: The efperfect pendant light installed, demonstrating its aesthetic appeal in a living space.

Istruzzjonijiet Operattivi

• Tixgħel/Jitfi: Once installed and power is restored, operate the light fixture using your wall switch.
• Funzjonalità tad-Dimming: If you have installed dimmable E26 bulbs and a compatible dimmer switch, you can adjust the light intensity by using the dimmer switch.

Figure 9: Visual representation of the dimmable feature and potential light color temperatures when using compatible bulbs.

Manutenzjoni

• Tindif: Disconnect power before cleaning. Wipe the fixture and glass shades with a soft, dry, or slightly damp drapp. Tużax prodotti tat-tindif jew solventi li joborxu, għax jistgħu jagħmlu ħsara lill-finitura jew lill-ħġieġ.
• Sostituzzjoni tal-bozza: Ensure power is off. Allow bulbs to cool completely before attempting to replace them. Unscrew the old bulb and screw in a new E26 bulb of the appropriate wattage (massimu 60W).

Issolvi l-problemi

Informazzjoni dwar Garanzija

efperfect offers a 60-day return service for any damaged or defective product. Additionally, free replacement is provided for any non-working or broken part within five years of purchase. Please retain your proof of purchase for warranty claims.

Appoġġ għall-Klijent

If you encounter any issues or have questions regarding your efperfect Modern 3 Lights Glass Pendant Light, please contact our customer support team. We aim to respond to inquiries within 24 hours.

For support, please refer to the contact information provided with your purchase or visit the official efperfect store online.

Thank you for choosing efperfect.