Introduzzjoni
This manual provides detailed instructions for the assembly, operation, and maintenance of your Yaheetech Metal Twin Bed Frame (Model YT-00136885). Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Informazzjoni dwar is-Sigurtà
Prekawzjonijiet ta' Sigurtà Importanti:
- Do not load more than 204 kg (450 lb) onto the bed frame.
- Carefully follow all assembly instructions to prevent instability or collapse.
- Oqgħod attent madwar truf li jaqtgħu waqt l-assemblaġġ u l-użu.
- Ensure the bed frame is securely assembled to prevent unintended movement.
- Żomm partijiet żgħar 'il bogħod mit-tfal waqt l-assemblaġġ.
Lista tal-Partijiet
Before assembly, verify that all components listed below are present and undamaged. Refer to the assembly video for visual identification of parts.
Komponenti tal-Qafas:
- Sezzjonijiet tal-headboard u tal-footboard
- Binarji tal-Ġnub
- Center Support Beam with legs
- Paletti tal-metall
Ħardwer:
- Various bolts, nuts, and washers (as per included hardware pack)
- Hex key and wrench (provided for assembly)
Istruzzjonijiet ta' Armar
Follow these steps to assemble your Yaheetech Metal Twin Bed Frame. It is recommended to assemble the bed frame on a soft, clean surface to prevent scratches.
Gwida tal-Vidjo tal-Assemblaġġ:
Video 1: Step-by-step assembly guide for the Yaheetech Metal Bed Frame. This video demonstrates the complete assembly process from unboxing to the final structure.
Istruzzjonijiet bil-Miktub Pass Pass:
- Arma l-Headboard u l-Foodboard:
Attach the vertical support posts to the decorative headboard/footboard panels using the provided bolts and washers. Ensure all connections are secure but do not fully tighten until all parts are aligned.
Figure 2: Detail of the headboard's curved design, showing the attachment points for the vertical posts. - Waħħal il-Poġġamani tal-Ġenb:
Connect the side rails to the assembled headboard and footboard sections. Use the appropriate bolts and washers, ensuring the side rails are correctly oriented. Hand-tighten bolts initially.
- Installa r-Raġġ ta' Appoġġ taċ-Ċentru:
Position the center support beam, including its legs, in the middle of the frame. Secure it to the side rails using the designated hardware. This beam provides additional stability.
Figure 3: Illustration of L-shaped plates used to fasten frame components, enhancing structural stability. - Poġġi l-Paletti tal-Metall:
Lay the metal slats across the frame, fitting them into the designated slots on the side rails. Ensure all slats are evenly spaced and securely seated. The side rails are designed to be higher than the inserted slats to prevent mattress movement.
Figure 4: Detail showing the built-in metal slats and the raised side rail design, which helps to keep the mattress in place. - Issikkar finali:
Once all components are in place and aligned, use the provided hex key and wrench to fully tighten all bolts. Do not overtighten. Verify the frame is stable and level.
Karatteristiċi tal-Prodott
- Kostruzzjoni Durabbli: Crafted from heavy-duty powder-coated metal for long-lasting use.
- Headboard u Footboard Integrati: Features a curved design that adds to the aesthetic and helps secure bedding.
- L-ebda Box Spring Meħtieġa: The metal slat system provides direct support for your mattress.
- Mattress Retention: Side rails are designed to be higher than the slats, preventing the mattress from sliding.
- Ħażna taħt is-sodda: Offers approximately 13 inches of clearance beneath the frame for storage solutions.
- Reżistenti għall-ħoss: Engineered for a stable and quiet sleep experience.
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | Yaheetech |
| Numru tal-Mudell | YT-00136885 |
| Daqs | Tewmin |
| Kulur | Iswed |
| Materjal | Metall |
| Dimensjonijiet tal-Prodott (L x W x H) | 196.5 x 104.5 x 88.5 ċm (77.5 x 41 x 35 pulzieri) |
| Piż tal-oġġett | 13.2 kg (29.2 lb) |
| Kapaċità massima tal-piż | 204 kg (450 lb) |
| Ground Clearance | 13 pulzieri |
| Daqs tas-Saqqu Kompatibbli | Twin (75" x 39") |
| Karatteristiċi Speċjali | Curved Design Headboard, No Box Spring Needed, Squeak Resistant, Sturdy, Under Bed Storage |
Manutenzjoni
Biex tiżgura l-lonġevità u l-prestazzjoni ottimali tal-qafas tas-sodda tiegħek, segwi dawn il-linji gwida ta' manutenzjoni:
- Tindif: Imsaħ il-qafas tal-metall b'ċarruta ratba u damp drapp. Evita prodotti tat-tindif li joborxu jew kimiċi ħarxa li jistgħu jagħmlu ħsara lill-finitura.
- Issikka l-Qfieli: Iċċekkja l-boltijiet u l-viti kollha perjodikament biex tiżgura li jibqgħu ssikkati. Issikkahom mill-ġdid kif meħtieġ biex iżżomm l-istabbiltà u tevita li jkun hemm xi ħsejjes.
- Evita tagħbija żejda: Do not exceed the maximum weight capacity of 204 kg (450 lb) to prevent structural damage.
- Rilokazzjoni: Meta ċċaqlaq il-qafas tas-sodda, erfa'h minflok ma tkaxkru biex tevita li tagħmel ħsara lill-qafas jew lill-art tiegħek.
Issolvi l-problemi
Jekk tiltaqa' ma' xi problemi bil-qafas tas-sodda tiegħek, irreferi għall-problemi u s-soluzzjonijiet komuni li ġejjin:
- Ħsejjes ta' tgergir:
Squeaking often indicates loose connections. Re-tighten all bolts and screws on the frame, especially where the side rails connect to the headboard/footboard and the center support beam.
- Frame Instability/Wobbling:
Ensure all bolts are fully tightened. Verify that the center support legs are making firm contact with the floor. Check that all frame components are correctly aligned as per the assembly instructions.
- Saqqijiet li jiżżerżqu:
The bed frame is designed with raised side rails to minimize mattress sliding. Ensure the mattress is correctly positioned within the frame. If sliding persists, consider using a non-slip mattress pad.
Garanzija u Appoġġ
For warranty information or technical support, please refer to the documentation included with your purchase or contact Yaheetech customer service directly. Contact details can typically be found on the manufacturer's webis-sit jew l-irċevuta tax-xiri tiegħek.
